Lichtkranz Dorf auf Kugelsockel
Created today
Description
Ein asymmetrischer Kranz aus zehn unterschiedlich großen Häuschen, die sich an der Rückwand berühren und so eine durchgehende Silhouette bilden. Türen und Fenster sind tief ins Innere durchgestanzt, sodass das Licht eines Teelichts im 65-mm-Bodenglas nach außen dringen kann.
- Lichtdurchlässig: Die Öffnungen gehen durch die innere Wand direkt bis ans Glas.
- Abwechslungsreich: Jedes zweite Haus bricht die Höhe und Breite auf.
- Stabiler Kern: Der Sockel aus vier gestapelten Rillenkugeln trägt die Konstruktion sicher.
Images
More like this
Explore more in Decor & Display →
Tea Light Skull
A geometric, stylized skull designed to hold a standard tea light. The model stands roughly 4 inches (100mm) tall and features a hollow inner chamber connected to the eyes and nose, allowing light to cast outwards. Height: ~101mm (4 inches) Base Opening: 42mm diameter (fits standard 38mm tea lights) Printability: Designed with a flat base. Supports are recommended for the eye sockets and inner ceiling depending on your printer's bridging capability. Material Note: White or off-white PLA is recommended to diffuse the light effectively. Ensure you only use battery-operated LED tea lights, as a real flame will melt the PLA.
Classic Jack-o'-Lantern Diffuser
A ribbed, dome-shaped pumpkin diffuser designed to slip cleanly over a 60mm spherical light (like an Olight Obulb). Uniform Shell: Hollowed with a constant 2mm wall thickness to ensure light diffuses brightly and evenly across the entire surface. Classic Jack-o'-Lantern Face: Scaled and positioned to let maximum direct light through while keeping the proportions balanced. Flat Base: Sits firmly over the light without wobbling or tilting.
Vortex Geometric Abstract
O sculptură abstractă cu geometrie generativă, concepută pentru a fi un punct de atracție vizuală pe orice birou sau raft. Liniile ascuțite și răsucite creează iluzia unei mișcări continue, reflexiile luminii schimbându-se în funcție de unghiul din care este privită. Note de design pentru printare: Fără suporturi: Toate unghiurile sunt calculate pentru a fi printate curat, direct pe un pat plat. Structură integrată: Spiralele exterioare se întrepătrund masiv cu nucleul central, formând o piesă solidă și rezistentă. Recomandare material: Un filament silk (mătase) sau dual-color va scoate în evidență cel mai bine fațetele răsucite.
Initials — HA Desktop Decor
A solid, freestanding lettermark featuring the letters "HA". Designed as a simple desktop decoration, the chunky typography sits on a stable plinth, making it an easy display piece for shelves or desks. Dimensions Overall Height: 120 mm Letter Thickness: 10 mm Base Depth: 30 mm for tip-resistant stability Print notes This model prints upright in one piece. The chosen font has thick, self-supporting strokes, so it should handle nicely on an FDM printer without needing supports for the letters.
SMG-11 — Red Dot Machine Pistol Replica
SMG-11 is a life-size, non-functional display replica of the compact machine pistol from Rainbow Six Siege, built in the MAC-11 pattern. The magazine is a separate piece that slides out of a real well in the grip, and a rail-mounted red dot sight sits on top. Features Removable magazine with baseplate, feed lips, catch notch and witness holes Grip with mag well, side texturing, mag release button, trigger and trigger guard Boxy receiver with ejection port, side serrations, safety lever and front sling loop Grooved barrel with muzzle ring Top rail with cross slots, front sight with ears and cocking knob Red dot sight with housing, turrets, battery cap, lens and dot Open wire stock Print notes Overall length is about 280 mm with the stock, so it needs a large bed or splitting into sections. Print the magazine separately, baseplate down. The well has about 0.3 mm clearance per side. Wire stock rods may need supports. Display piece only; it has no working mechanism.
Givvy Display Logo
A thick, rounded "GIVVY" logo designed specifically for multi-color FDM printing (AMS/MMU). The text features a solid aqua centre surrounded by a continuous purple outline that merges the letters into a single, cohesive piece. Scaled perfectly for mounting onto a trading-card display stand. Dimensions: ~94 mm wide, ~31 mm high, and 3.2 mm thick. Format: Co-planar separate regions for the centre and outline, allowing easy assignment of different filaments in your slicer. Mounting: Perfectly flat back for flush gluing to display stands or frames.