Low-Poly Geometric Chess Knight
Created 3 months ago
Description
A modernized, low-poly chess knight. The structure is built with a reduced polygon count, giving every curve a deliberate, faceted surface.
- Style: Geometric / Low-Poly
- Scale: Standard chess piece dimensions with a 28mm base
- Printability: The faceted surfaces print cleanly with standard layer heights, catching the light in a distinct, modern way.
Photos
Technical views
More like this
Explore more in Decor & Display →
Helix — Open-Frame Twisted Fin Lamp Shade
Helix is a flared lamp shade with no solid wall. 72 thin fins spiral through a 60° twist as the shade widens from the base to the top, and three low reinforcing rings hold the whole frame together. The result reads like a lantern or woven cage, and the light comes through as spiralling slats of shadow. The fins and rings are matched on purpose: each fin reaches inward only as far as the rings do, so the inner edge stays clean from bottom to top. A small spoked fitter ring at the base seats the shade over a lamp holder. Dimensions Height: 130 mm Base diameter: about 90 mm Top diameter: about 140 mm Twist: 60° over the full height Features 72 twisted, flared fins, 1.2 mm thick Three low-profile rings at the bottom, middle and top, 3.5 mm tall Fin depth matched to the ring depth (about 6.6 mm at the base, scaling with the flare) Spoked fitter ring at the base, 3 mm tall Print notes Print upright with the fitter ring on the plate. Slow speeds help, since the fins are thin. Use a cool LED bulb only. Fit to a specific socket is untested, so check the fitter ring against your holder.
Aerocord — Wire Heart Frame
A smooth, continuous 10mm tubular loop mathematically traced into a classic heart shape, scaled to a full 20cm span. Ideal as a minimalist wall piece, a wreath frame, or a standalone desk feature. Dimensions Width: 200 mm Cord Diameter: 10 mm Overall Profile: Sits flat with a 10 mm Z-height Features Continuous Sweep: A closed tubular loop with no hard joints. Classic Proportions: Driven by standard parametric heart equations for a familiar, balanced shape. Ready to Print: Sits perfectly flat on the bed, requiring zero supports.
Fantasy Chess King, Witch, Fire Horse
Three chunky fantasy chess pieces that tip over easily when the base is narrow: a king, a witch queen and a fire horse, each on a wide 34 mm round base. Key numbers Pieces: king with horned monster face and crowned scepter, witch queen with bent hat and potion bottle, fire horse with flame mane and tail Base: 34 mm diameter, 4 mm thick, flat side down Height: about 55–65 mm per piece Spacing: 45 mm apart in one row, so each can be split off Print: no supports needed for most parts; scepter rod and flame spikes are the thinnest features, so print slowly Colours: gray bodies with black, red and orange details
iPad Picture Frame Adapter Rödlam 21x30
A two-part adapter plate that centers a 5th Generation iPad (9.7") inside an IKEA RÖDALM frame. It acts as a solid backing spacer, locking the tablet into the frame body while providing a cutout exactly the size of the active screen. The split design fits on a standard 220mm print bed and joins with simple flat printed tabs, avoiding overhangs entirely. Remixing and Adjustments Screen Cutout: Currently set to 197 × 148 mm. If you swap to an iPad with a different bezel ratio, you can adjust these dimensions to crop it cleanly. Frame Depth: The total block depth is 30 mm. Thinner frames will require cutting down the outer block height. Cable Routing: A 16 × 25 mm rear channel provides plenty of clearance for bulky aftermarket Lightning cables. Joints: Uses simple 11 × 14 mm rectangular biscuits. You can easily scale these or add more pairs for extra rigidity depending on your printer's tolerances.
Miniature Log Cabin for Toy Trains
A small log cabin for model railway layouts and toy train sets. Stacked round logs with overlapping corners form the walls, with a front door, side windows and a gable roof. Footprint about 60 x 45 mm, wall height 32 mm plus roof Door and window openings on the walls Hollow interior with open underside Two colour regions: log walls and roof Print upright on the flat base; the roof overhang is shallow and prints without supports in most cases.
Frontlader — Zweiteiliges Retro-Konsolengehäuse
Frontlader ist ein breites, keilförmiges Konsolengehäuse im Stil der klassischen Frontlader-Konsolen, aufgeteilt in Unterteil und Oberteil zum Verschrauben mit M3. Dunkle Einsätze für Cartridge-Abdeckung, Frontblende und Tasten setzen sich vom hellgrauen Gehäuse ab. Features Unterteil mit Boden, Wänden und vier Schraubsäulen Durchgehende 3,4-mm-Löcher von unten bis zur Trennfuge Oberteil mit Schraubdomen und 2,7-mm-Pilotlöchern Zwei USB-A-Öffnungen in der Front Lüftungsschlitze an Seiten und Oberseite Zwei einzeln druckbare Tasten Dimensions 254 × 203 × 76 mm Trennfuge bei Z 30