Magnetic Enclosure Storage Box
Created today
Description
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements.
Remix Hooks
- Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides.
- Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces.
- Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
Images
More like this
Explore more in Storage & Organization →
BunkMate — Magnetic Rail Tray
A sturdy tray that hangs over a bunk bed rail, keeping bedtime essentials close at hand. Features Magnetic Base: Features eight fully-enclosed pockets sized for 0.7" x 0.12" magnets. Pause your print to drop them in, and they'll be sealed inside the floor forever. Wide Hook: Designed with a 34mm gap to easily clear thicker bed frames. Print-in-Place: No supports required; prints upright with the hook flat on the build plate.
RailGrab — Bed Box Tray
A heavy-duty side tray designed to hook right over a bunk bed rail. The interior basin is dimensioned to securely hold a 3.9-inch square box, wrapped by a full 1-inch retaining lip so nothing gets knocked over in the dark. Dimensions Inner Basin: 100 mm × 100 mm (perfect clearance for a 3.9" box). Lip Height: 1 inch (25.4 mm). Rail Hook: Fits standard 1-inch bed rails. Print notes With its 5 mm solid walls, this tray acts as a structural bracket. Best printed in PETG or ABS for long-term creep resistance, though PLA will do fine if it won't see direct sunlight. Depending on your orientation, supports are required for the hook overhang.
Standard 140x40 Gehäuse
Gehäuseunterteil mit Außenmaßen 140 x 40 x 25 mm und 3 mm Wandstärke. Passung: Der Deckel hat eine Innenlippe mit 0,5 mm Gesamtspielraum (0,25 mm pro Seite). Druck: Beide Teile liegen flach auf dem Druckbett (Deckel liegt auf der Oberseite) und benötigen keine Stützstrukturen. Kapazität: Innenraum misst effektiv 134 x 34 x 22 mm.
Ühe Otsaga Suletud Sahtlikarp
Sahtel kiilub kinni, sest pole kuskilt korralikult kinni võtta. See on suletud tagaseinaga lihtne kest, millel on nüüd sahtli ees korralik väike näpu-kõrgendus, et seda saaks mugavalt ja ilma küüsi murdmata välja tõmmata. Mahutavus: Täpselt 200 × 50 × 50 mm kasulikku ruumi. Seinad: 1.5 mm, prinditav ilma tugedeta. Liikumisruum: 0.5 mm lõtk külgedel tagab sujuva liugumise.
Low-Profile Reeded Catchall Tray
A wide, low-profile oval catchall tray featuring a seamless ribbed exterior and a smooth inner basin. Dimensions: 200mm × 100mm × 22mm Wall Thickness: 5mm (with 5mm continuous exterior ribs) Floor Thickness: 5mm Use Case: Keys, loose hardware, or desk accessories. The shallow walls make it easy to reach in and grab small items.
TipVault — Scaled Coin Box
A sturdy tip box designed to print in one piece with no supports or assembly required. It features a fully articulated, print-in-place hinge connecting the lid directly to the main body. The front incorporates deeply debossed stencil lettering, creating a hollowed-out window effect, while the exterior is textured with an interlocking scalloped "fish scale" pattern to add grip and visual interest. Features Print-in-Place Hinge: Conical pins built into the lid mesh with the box knuckles, requiring no extra hardware. Prints entirely vertically. Scalloped Texture: A geometric overlapping scale pattern is cut into the walls, giving it a stylized organic look. Stencil Lettering: "PIZZARAMA TIPS" is punched completely through the front wall, functioning as a window into the box. Print notes Designed to print in its default orientation (lid standing straight up). Use a 0.2mm layer height or smaller for the hinge gap to function correctly. The floating inner islands of the text will not be supported and are designed to drop away cleanly.