Meenakshi — Frame & Monogram
Created 3 months ago
Description
This custom display piece merges a classic portrait photo frame with an elegant cursive monogram. The letter "M" branches off the right side of the frame, finished with a detailed butterfly resting delicately on its lower swooping tail.
Features
- Picture Frame Core: Designed with a built-in recess on the back to easily drop in a trimmed photo.
- Integrated Monogram: Features a large, sweeping "M" in the Alex Brush font.
- Custom Callout: The base of the frame reads "Meenakshi".
- Lay-Flat Printing: Prints entirely flat on its back with no supports required, making for a clean surface finish on the front face.
Photos
Technical views
More like this
Explore more in Decor & Display →
Advent Calendar With 24 Drawers
Advent calendar drawers that stick, fuse, or have nothing to grab. Each of the 24 drawers has a rounded finger grip on the front, a numbered face, and 0.5 mm clearance all round, so it slides out freely after printing in place. Key numbers Footprint: 177.5 × 157.5 mm (fits a 180 × 180 mm bed) Height: about 49.9 mm including grips Layout: 4 columns × 6 rows, printed lying on its back, front facing up Drawer interior: 38.5 × 22 × 42.5 mm Walls: 1.5 mm; grips 8 × 5 mm, 2.5 mm proud Print: white PLA, 0.4 mm nozzle, no supports inside the drawers; the drawer back walls hover 0.4 mm above the frame back, so expect a thin first-layer bridge
整套装配总参考图1800×2400mm Opening Double Door Frame, 1:20
Exploded 1:20 assembly of a hotel automatic double swing door, built for a 90 × 120 mm frame opening (1800 × 2400 mm full size). What it contains Aluminum-style frame: two jambs, head beam and threshold Two glass leaves, 44 × 3 × 118 mm, pulled forward of the frame Top track, motor and two linkage arms lifted above the head Microwave sensor above the track Two infrared photocells moved out to each side Check before printing The 90 × 120 mm opening and 1:20 scale are assumed. Parts are spaced apart for display, not for assembly. Leaf pivot pins and frame sockets are not modelled, so this does not fit a working door mechanism.
Christmas Tree Lantern for LED Tealight
A Christmas tree lantern that sits over a battery LED tealight, so the light stays hidden inside instead of glaring from a bare tealight on the table. The walls are perforated with rings of small round holes that throw dots of light, and the bottom is open so the LED can be placed or swapped without taking anything apart. Key numbers Height: about 135 mm including star Base diameter: 90 mm, open underneath (inner opening about 87 mm) Wall: 1.6 mm, three stacked tiers Perforations: 4.2 mm holes, staggered rings Star: separate colour, peg-mounted into the top tier Printing Print upright, open end down, no supports needed for the cone walls Green for the tree, gold or yellow for the star Use a 0.4 mm nozzle; a lighter or translucent filament glows more
Lamp Bases, Shades and Diffuser Set
A set of mid-century lamp parts that all share one coarse 6 mm-pitch thread, so any shade fits any base. The set has two fluted shades (round and square ribs), a white adjustable diffuser and several bases: tall, short, grooved, two tripods, a flat-leg grooved tripod and a dowel-leg hub. Remix hooks Flat-leg tripod: legs are 16 mm wide slabs (before scaling) with two grooves, 3.2 mm wide, down each outer face. Change the groove count, offset (±4 mm) or width. Leg height and spread: hub height 70 mm and foot radius 70 mm set the splay. Raise both for a taller version. Thread spigot: 52 mm across, 38 mm long. Keep it to stay compatible with the shades. Pairs with: either fluted shade and the diffuser. The 42 mm bore runs straight through for the bulb and cord.
Hexagonal Honeycomb Floating Shelf Set
A three-cell honeycomb of hexagonal wall shelves, each cell deep enough for small plants or a few books. The cells share walls and mount as one cluster, so a blank wall becomes a single graphic statement. Two keyhole slots per hex are hidden in the back panel, so no brackets are visible once hung. What it's for Displaying small potted plants, books, or ornaments on a wall. Turning a plain wall into a honeycomb feature without visible hardware. Hanging flush: screw heads sit in recesses on the wall side of the 6 mm back panel. Dimensions Each hex: 200 mm across the points, about 173 mm across the flats. Depth: 100 mm per shelf. Back panel: 6 mm thick. Side wall: 5 mm. Keyholes: two per hex, 80 mm apart, cut through the back panel with a recess on the wall side. Layout: three hexes joined along shared walls in a triangular cluster. Print notes The cluster is oriented back-down on the build plate, so it needs no supports. It prints as one large fused piece. Check that it fits your bed, or split it into single hexes. Use screws with heads that fit the keyhole recess, and anchors suited to your wall type. Remix ideas Add more cells to extend the honeycomb sideways or upward. Change the depth for shallow trinket shelves or deeper book cubbies. Print each hex separately in different colours and assemble them on the wall. Add a lip or a drainage hole for planters.
Black and Gold Wedge Desk Nameplate
A wide desk nameplate with a black rounded base, thin gold border and raised gold lettering. The name sits on the top line in large capitals, with ASSISTANT PROFESSOR centred below it in smaller capitals. The plate is tilted back on an integrated wedge stand, so it needs no separate parts. The back and underside are flat, and the build needs no supports. Text: SIMRANJEET KAUR LOHAT (top), ASSISTANT PROFESSOR (bottom) Colours: black base and wedge, gold border and letters Letters raised 2 mm, border raised 1.2 mm Plate size 200 × 64 mm, tilted back 15° from vertical Suited to multicolour printing with a 0.4 mm nozzle