Minecraft Grass Block Keychain
Created today
Description
What it's for
A keychain shaped like a Minecraft grass block: smooth brown dirt body, green grass cap that overhangs slightly, and blunt, irregular grass drips on all four sides. A sturdy corner loop takes a key ring.
Dimensions
- Approx. 27 × 27 × 28 mm
- Cap about 5 mm thick; drips 3.5–8 mm long
- Loop hole about 4 mm, at one top corner
Remix ideas
- Swap colours for mycelium or snow blocks
- Change drip layout
- Enlarge the loop hole for a lanyard
Images
More like this
Explore more in Keychains & EDC →
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.
Physiotherapist Keychain, 70x40 mm Bold
What it's for A two-colour keychain for a physiotherapist: white plate, teal raised lettering and symbol. "Dr. Sonal" is large and bold, with "PHYSIOTHERAPIST" in wide heavy capitals beneath it, sized to stay legible with a 0.4 mm nozzle. Dimensions Plate: 70 × 40 × 3 mm, rounded corners, flat back Raised text and symbol: 0.8 mm Bottom line: 5.6 mm letter height, about 62 mm wide Keyring hole: 4.5 mm, top-left, with a 9 mm reinforcing ring Remix ideas Swap the name or title for another practitioner Change the teal to any second filament colour Replace the spine and figure with another clinic symbol
Sleutelhanger Elisabeth, Courgette, 62 mm
Sleutelhanger met de naam "Elisabeth" in Courgette-letters, bedoeld voor een standaard sleutelring. Eén stuk, in één kleur te printen. Voor het printen controleren Breedte van de naam: 62 mm, plus de rand ongeveer 70 mm. Gat in het oogje: 4,5 mm, geschikt voor een gewone sleutelring. Een dikkere ring past niet. Dikte: 2 mm ondergrond, letters 3,2 mm hoog. Past niet bij Karabijnhaken met een dikke ogen of brede band. Het gat is te klein.
60mm Keyring Carabiner Clip
A 60x30mm print-in-place compliant carabiner designed to interface with standard split-ring keychains and lightweight everyday carry items. The frame features a 5mm constant cross-section with alternating triangular truss cuts along the spine to reduce material weight without compromising the hinge action. Fitment and Tolerances Clearance: The interlocking latch mechanism relies on a 0.4mm printed gap. Ensure flow rate and horizontal expansion are calibrated to prevent the gate from fusing to the catch. Hardware: Accepts standard flat or wire keyrings up to 4mm in thickness through the inner loop. Incompatibilities: This is a decorative thermoplastic clip for keys and pocket tools. It is strictly non-load-bearing. Do not use for climbing, rigging, securing heavy equipment, or any life-safety applications.
Stacked Name Keychain Pendant
A black keychain pendant with bold white stacked lettering reading Nodi / Mani / Yani and a small red heart beside the last line. The loop sits above the N. Remix hooks Loop position: centred at about X 2, Y 33 with a 9 mm outer and 4.5 mm hole. Shift it or enlarge the outer diameter for a stronger ring. Heart gap: the heart sits about 1 mm clear of the final letter. Change its X offset (34.2) to adjust spacing. Layer heights: 3 mm black base, 2 mm raised white lettering and red heart, 5 mm total. Font: Archivo Black at 8.5 mm; swap for a rounder face for a softer look. Pairs with: a split ring or small carabiner; assign black, white and red to separate AMS filaments.
LANA Heart AHMED Keychain Nameplate
A three-colour keychain nameplate reading LANA ♥ AHMED, about 60 × 10 mm and 5 mm thick: a 3 mm black base with white letters and a red heart raised 2 mm on top. A black loop on the left end has a 4.5 mm through-hole for a standard key ring. Remix hooks Base thickness (3 mm): the number that sets the plate's heft. Drop it for a lighter tag. Raised height (2 mm): letters and heart share it. Make the heart taller for emphasis. Loop hole (4.5 mm): widen it for thicker rings or cord. Backing margin (1.5 mm): the black border around the letters. Thicken it for a sturdier outline. Names and font: the text is DM Serif Display at about 7 mm tall. Swap the names or the typeface. Pairs well with a metal split ring. Each colour is a separate region for AMS assignment.