Miniature Log Cabin for Toy Trains
Created today
Description
A small log cabin for model railway layouts and toy train sets. Stacked round logs with overlapping corners form the walls, with a front door, side windows and a gable roof.
- Footprint about 60 x 45 mm, wall height 32 mm plus roof
- Door and window openings on the walls
- Hollow interior with open underside
- Two colour regions: log walls and roof
Print upright on the flat base; the roof overhang is shallow and prints without supports in most cases.
Images
More like this
Explore more in Decor & Display →
GutMap — IBS Educational Diorama
GutMap is a tabletop teaching diorama that walks through Irritable Bowel Syndrome in five connected stations: normal function, IBS mechanism, lab markers, diagnosis and treatment. Raised organs, lab tubes, capsules and a clipboard sit on colour-coded tiles, linked by a continuous orange flow arrow, with a title wall and a separate reference panel at the back. Features Normal colon with segmented (haustra-style) walls and cecum Gut-brain station: brain, spasming colon, stress bolt Lab rack with CBC, CRP and calprotectin tubes, plus a note that no single test confirms IBS Diagnosis station with clipboard and stethoscope Treatment station: antispasmodic, antidiarrheal and laxative capsules, diet and low-FODMAP, exercise, sleep, stress management Legend, notes plate, title wall with group and supervisor/TA placeholders Reference panel: NIDDK, World Gastroenterology Organisation, Mayo Clinic Dimensions Base: 420 x 230 x 10 mm Back wall height: 62 mm overall Section tiles: 74 x 104 mm each Print notes Everything is one connected, flat-bottomed assembly; no floating parts. Text is raised 1 mm, 4 mm and larger. Print in multiple colours or paint the declared regions. Replace the bracketed member and supervisor names before printing.
Dschungel
Oasis bringt ein kleines Stück Urlaub direkt auf den Schreibtisch. Dieses minimalistische Strand-Diorama kombiniert eine solide Basis aus flachem Sand und ruhigem Wasser mit einer ikonischen, leicht geneigten Palme. Es eignet sich ideal als entspannendes Deko-Objekt oder als Kulisse für kleine Figuren. Dimensionen Grundfläche: 100 mm x 100 mm Höhe (Sand): 8 mm Höhe (Wasser): 4 mm Gesamthöhe: ca. 45 mm (inklusive Palme) Druckhinweise Die Basis lässt sich einfach und flach auf das Druckbett legen. Für die ausladenden Blätter der Palme werden leichte Stützstrukturen (Supports) empfohlen, damit sie sauber in der Luft gedruckt werden können. Wer es mehrfarbig mag, kann den Druck auf bestimmten Z-Höhen pausieren oder direkt mehrfarbiges Filament verwenden.
Helix — Open-Frame Twisted Fin Lamp Shade
Helix is a flared lamp shade with no solid wall. 72 thin fins spiral through a 60° twist as the shade widens from the base to the top, and three low reinforcing rings hold the whole frame together. The result reads like a lantern or woven cage, and the light comes through as spiralling slats of shadow. The fins and rings are matched on purpose: each fin reaches inward only as far as the rings do, so the inner edge stays clean from bottom to top. A small spoked fitter ring at the base seats the shade over a lamp holder. Dimensions Height: 130 mm Base diameter: about 90 mm Top diameter: about 140 mm Twist: 60° over the full height Features 72 twisted, flared fins, 1.2 mm thick Three low-profile rings at the bottom, middle and top, 3.5 mm tall Fin depth matched to the ring depth (about 6.6 mm at the base, scaling with the flare) Spoked fitter ring at the base, 3 mm tall Print notes Print upright with the fitter ring on the plate. Slow speeds help, since the fins are thin. Use a cool LED bulb only. Fit to a specific socket is untested, so check the fitter ring against your holder.
Aerocord — Wire Heart Frame
A smooth, continuous 10mm tubular loop mathematically traced into a classic heart shape, scaled to a full 20cm span. Ideal as a minimalist wall piece, a wreath frame, or a standalone desk feature. Dimensions Width: 200 mm Cord Diameter: 10 mm Overall Profile: Sits flat with a 10 mm Z-height Features Continuous Sweep: A closed tubular loop with no hard joints. Classic Proportions: Driven by standard parametric heart equations for a familiar, balanced shape. Ready to Print: Sits perfectly flat on the bed, requiring zero supports.
Frontlader — Zweiteiliges Retro-Konsolengehäuse
Frontlader ist ein breites, keilförmiges Konsolengehäuse im Stil der klassischen Frontlader-Konsolen, aufgeteilt in Unterteil und Oberteil zum Verschrauben mit M3. Dunkle Einsätze für Cartridge-Abdeckung, Frontblende und Tasten setzen sich vom hellgrauen Gehäuse ab. Features Unterteil mit Boden, Wänden und vier Schraubsäulen Durchgehende 3,4-mm-Löcher von unten bis zur Trennfuge Oberteil mit Schraubdomen und 2,7-mm-Pilotlöchern Zwei USB-A-Öffnungen in der Front Lüftungsschlitze an Seiten und Oberseite Zwei einzeln druckbare Tasten Dimensions 254 × 203 × 76 mm Trennfuge bei Z 30
Connected "Eleven" Script Sign
A freestanding or mountable word sign featuring the word "eleven" written in a flowing cursive script. The lettering uses tightened character spacing to ensure all characters overlap continuously, making it printable as a single, unified plastic piece without the need for a backing board. Continuous Flow: All letters connect to form one unbroken piece. 4mm Thickness: Provides enough rigidity for handling or mounting while keeping print time low. Flat Base: Generates perfectly flat on the build plate for easy adhesion.