Open-Front Can Carrier1
Created 3 days ago
Description
Standard 355ml cans pile up in the fridge and roll around when you try to stack them. This is an open-front upright shelf carrier that holds six cans — three wide, two high — securely in their own cradles.
The handle mounts at the top front and swings entirely clear of the loading area. When dropped back, the grip sits perfectly flush with the back wall of the crate, staying completely out of your way until it's time to lift it.
Fit Details
- Capacity: 6x Standard 355ml cans (66.5mm diameter)
- Clearance: Cans slide in vertically from the open front
- Assembly: The handle prints flat. Just flex the arms outward slightly to snap the 9.5mm pegs into the crate's pivot holes.
Images
More like this
Explore more in Storage & Organization →
Open-Frame Armored Commander Deck Box
A Commander deck box wearing skeletal corner armor: each of the eight TPU bumpers is cut into an open frame, so only a rim hugging the box's edges remains, like the corner guards on a vintage steamer trunk. The box holds around 100 sleeved cards, with a lift-off lid and a magnetic swap-in emblem on the front. Window cuts: a rounded rectangle at 80% of each face (top, front, side) is cut through the bumpers. Bumpers: all eight corners are guarded from three directions, with scooped corners. Emblem: a 32 mm tile held by two 6 x 2 mm magnets. Lid: deep cap with a chamfered top edge and an inner lip.
150mm Borg Friendship Vault
Zak's Borg Friendship Vault. Three-piece print, designed to drop in and seat clean without fasteners. Overall Footprint: 150mm x 150mm. Total Height (Assembled): 145mm. Internal Payload Bore: 65mm diameter x 105mm depth. Cage Windows: 90mm span, designed to bridge flat across the top without support on well-calibrated machines. The top cap runs a 118mm square boss to locate itself on the outer frame, plus a 64.5mm cylindrical plug to lock into the core and prevent horizontal slop. Print the outer cage and cap in black PETG; run the core in fluorescent PLA. Keep your cooling aggressive for the long window bridges.
Archiv-Einschub: Schiffe versenken
Ein maßgefertigtes, modulares Schubladen-Regal für Brettspiele und Kartensets (hier ausgelegt auf 150 x 45 mm Boxen). Das Set besteht aus drei Teilen: Regalgehäuse: Eine stapelbare, robuste Außenhülle mit Fase. Schublade: Passgenau mit 0,8 mm Spielraum zum einfachen Herausziehen. Ein Griff an der Front erleichtert das Greifen. Inlay-Buchstaben: Die Schrift ist als 1,5 mm tiefe Aussparung in der Frontplatte angelegt. Die separat gedruckten Buchstaben sind minimal verkleinert (0,15 mm Toleranz) und können nach dem Druck passgenau in die Front eingedrückt werden. Ideal für ein aufgeräumtes Regal, bei dem man jedes Spiel sofort auf der Frontblende erkennt.
Dual Crossover Enclosure
A scalable enclosure updated to house two crossover PCBs vertically. Features integrated external mounting tabs for MDF, top-edge ventilation slots for passive cooling, and a reinforced front panel with standard 19mm-spaced 4.5mm holes for banana plug binding posts. Internal capacity: 200x170x60mm Cooling: 4mm vertical ventilation slots Mounting: 4x external tabs with countersunk 4mm screw holes
Vented Power Supply Enclosure
What it's for A custom-sized, two-part vented enclosure designed to hold a 111x79x36mm power supply. It features side-mounted cooling vents, a solid base, and wire-routing holes positioned near the bottom of the narrow end. Dimensions External size: 99 x 131 x 42 mm (main box), plus the flush-fitting lid. Internal space: The central cavity between the corner screw pillars provides a clear 83 x 115 mm footprint, allowing a 2 mm clearance gap on all sides for the 111 x 79 mm power supply unit. Wire routing: Two 7mm diameter holes on the narrow end for cable pass-through. Assembly The lid secures into the four corner pillars using standard M3 screws. The interior features a small alignment lip on the lid to ensure it seats squarely against the posts.
Endgame Robotics Enclosure
A rugged, multi-part enclosure designed for robotic interfaces and smart control nodes. The three-piece split allows easy assembly, with a deep main chassis to house microcontrollers and batteries, capped by a clean windowed bezel and a vented back cover. Front Bezel: Features a recessed touch panel land and tiny microphone breakout holes. Main Chassis: Houses dual text debossing ("END" / "GAME"), structural columns for heat-set inserts, and a USB-C cutout. Back Cover: Includes countersunk M3 mounting holes, an expansion module bay, and a hexagonal vent grille.