Description
A heavyweight 3D-printable money clip designed to handle everyday utility. It features a folded flex-arm tuned to securely hold a handful of cash, alongside a covert church-key bottle opener smoothly integrated into the reverse base plate. The bold, embossed "DAD" typography on the outer face makes it a ready-to-go custom gift.
Dimensions
- Profile: Roughly 62mm long, 30mm wide
- Thickness: 9.5mm overall stack (5.5mm anchor base, 2.8mm arm)
- Opening: 1.2mm resting gap, comfortably holds 6–10 folded bills
Print Notes
- Designed to print on its side (long edge standing on the bed) to maximize sheer strength across the bottle opener wedge and the U-bend hinge. No supports required in this orientation.
- A high infill (80%+) is recommended for stiffness if the opener will see frequent cap-popping action.
Photos
Technical views
More like this
Explore more in Keychains & EDC →
Minecraft Grass Block Keychain
What it's for A keychain shaped like a Minecraft grass block: smooth brown dirt body, green grass cap that overhangs slightly, and blunt, irregular grass drips on all four sides. A sturdy corner loop takes a key ring. Dimensions Approx. 27 × 27 × 28 mm Cap about 5 mm thick; drips 3.5–8 mm long Loop hole about 4 mm, at one top corner Remix ideas Swap colours for mycelium or snow blocks Change drip layout Enlarge the loop hole for a lanyard
60mm Keyring Carabiner Clip
A 60x30mm print-in-place compliant carabiner designed to interface with standard split-ring keychains and lightweight everyday carry items. The frame features a 5mm constant cross-section with alternating triangular truss cuts along the spine to reduce material weight without compromising the hinge action. Fitment and Tolerances Clearance: The interlocking latch mechanism relies on a 0.4mm printed gap. Ensure flow rate and horizontal expansion are calibrated to prevent the gate from fusing to the catch. Hardware: Accepts standard flat or wire keyrings up to 4mm in thickness through the inner loop. Incompatibilities: This is a decorative thermoplastic clip for keys and pocket tools. It is strictly non-load-bearing. Do not use for climbing, rigging, securing heavy equipment, or any life-safety applications.
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.
Jeton — Porte-clés de chariot
Jeton de caddie à porter au porte-clés : un disque robuste avec une oreille percée pour l'anneau, et un léger creux sur une face pour coller une pastille ou une étiquette. Dimensions Disque : Ø 24 mm, épaisseur 2,4 mm Oreille : Ø 12 mm, trou de Ø 5 mm Creux : Ø 18 mm, profondeur 0,8 mm Impression À plat, sans supports PLA ou PETG, 3 périmètres conseillés
Physiotherapist Keychain, 70x40 mm Bold
What it's for A two-colour keychain for a physiotherapist: white plate, teal raised lettering and symbol. "Dr. Sonal" is large and bold, with "PHYSIOTHERAPIST" in wide heavy capitals beneath it, sized to stay legible with a 0.4 mm nozzle. Dimensions Plate: 70 × 40 × 3 mm, rounded corners, flat back Raised text and symbol: 0.8 mm Bottom line: 5.6 mm letter height, about 62 mm wide Keyring hole: 4.5 mm, top-left, with a 9 mm reinforcing ring Remix ideas Swap the name or title for another practitioner Change the teal to any second filament colour Replace the spine and figure with another clinic symbol
Sleutelhanger Elisabeth, Courgette, 62 mm
Sleutelhanger met de naam "Elisabeth" in Courgette-letters, bedoeld voor een standaard sleutelring. Eén stuk, in één kleur te printen. Voor het printen controleren Breedte van de naam: 62 mm, plus de rand ongeveer 70 mm. Gat in het oogje: 4,5 mm, geschikt voor een gewone sleutelring. Een dikkere ring past niet. Dikte: 2 mm ondergrond, letters 3,2 mm hoog. Past niet bij Karabijnhaken met een dikke ogen of brede band. Het gat is te klein.