PurrFeed — Cat Food Dispenser
Created today
Description
Meet PurrFeed — a clean, wall-mounted gravity dispenser designed specifically for 3oz (85g) cat food pate tins, such as Kirkland Signature or Fancy Feast. Load the cans in from the top, and pull them out one by one from the bottom chute.
The vertical design takes up zero counter space, and a front viewing channel lets you see exactly how many portions are left before it's time to restock.
Features
- Gravity Feed System: Holds roughly 6 cans at a time; grab the bottom one and the stack cleanly drops down.
- Tactile Retention Bump: A tiny raised lip at the floor of the extraction window keeps the bottom can securely seated until you lift and pull it out.
- Recessed Mounting: Three countersunk wall-mounting holes are located down the spine. The screw heads recess fully into the plastic so they won't scratch the cans as they slide past.
- Sight Window: The 26mm wide front channel gives you a clear view of your supply and doubles as a thumb slot for sliding cans out.
Dimensions
- Overall Footprint: 76mm wide × 76mm deep × 250mm tall.
- Internal Track: 70mm internal diameter (fits standard 65–66mm pate tins with enough clearance to prevent binding).
- Extraction Chute: 68mm wide × 42mm tall.
Images
More like this
Explore more in Storage & Organization →
Monolithic Helmet Hook
A robust, monolithic wall hook designed specifically for the bulk and straps of bicycle helmets. The sweeping, angled arm reaches out far enough to clear the wall, terminating in a rounded lip that won't dig into foam liners or fray fabric straps. Built to print cleanly standing up, the overhang angles are steep enough to self-support on most FDM machines. Mounting Details Backplate: 120mm tall by 40mm wide, distributing the load. Hardware: Two standard 5mm countersunk screw holes. Clearance: The upper screw hole is positioned well above the hook's lip to ensure a screwdriver can reach it straight-on without interference.
12mm Bore 8-Slot Screwdriver Rack
An 8-position wall rack designed around a straight 12mm bore to capture standard screwdriver shafts. The top of each slot flares into a 30mm funnel, guiding tools into place without precise alignment above the workbench. Capacity: Holds eight screwdrivers with shaft diameters up to 11.5mm. Handle Clearance: 32mm center-to-center spacing. Accommodates standard acetate or rubber grips, but will crowd or reject over-molded handles larger than 30mm. Mounting Interface: Three recessed bores cut for standard #8 countersunk screws. Critical Dimension: Verify the maximum diameter of the tool handles before printing to ensure they will not interfere across the 32mm spacing.
Wall-Mounted Display Shelf
A sturdy wall-mounted shelf featuring a J-profile design with open sides. Built specifically to support moderate loads up to 2 kg, it includes a generous structural fillet at the rear corner and three countersunk mounting points to distribute weight evenly against the wall. A pronounced front lip keeps displayed items securely in place. Dimensions Overall Width: 240 mm Overall Depth: 80 mm Back Wall Height: 60 mm Front Rim Height: 30 mm Material Thickness: 6 mm Print Notes Prints flat in its natural orientation (bottom surface on the build plate). The integrated countersunk holes are designed to be printed horizontally; they will bridge correctly on most standard FDM profiles without requiring internal supports. Recommended to use at least 3 perimeters (walls) for structural strength. Assembly Mounts directly to a flat surface using three standard flathead or countersunk screws (up to 4.5 mm thread diameter, 9 mm head). Suitable wall anchors are recommended based on the mounting surface to achieve the full 2 kg load capacity.
Drop-In Double Fiskars Knife Dock w blade storage
A custom Gridfinity-compatible tool tray designed to dock the Fiskars Pro Retractable Utility Knife (model 770210-1001). The heavy-duty aesthetic of the Fiskars knife calls for a simple, rugged docking station. Built on a standard 4x2 unit footprint, this tray swallows the knife whole while leaving generous finger grabs to pop it out fast when you're mid-project. Design Features 4x2 Gridfinity Footprint: Drops seamlessly into standard 42mm grid baseplates. Tapered Base Profiles: Easy alignment and standard Gridfinity locking dimensions. Ample Finger Clearance: Scalloped sides mean no digging around to retrieve your blade. Slider Channel: An extra-deep central groove ensures the blade slider button doesn't bottom out.
basic Drop-In Fiskars Dock
A custom Gridfinity-compatible tool tray designed to dock the Fiskars Pro Retractable Utility Knife (model 770210-1001). The heavy-duty aesthetic of the Fiskars knife calls for a simple, rugged docking station. Built on a standard 4x2 unit footprint, this tray swallows the knife whole while leaving generous finger grabs to pop it out fast when you're mid-project. Design Features 4x2 Gridfinity Footprint: Drops seamlessly into standard 42mm grid baseplates. Tapered Base Profiles: Easy alignment and standard Gridfinity locking dimensions. Ample Finger Clearance: Scalloped sides mean no digging around to retrieve your blade. Slider Channel: An extra-deep central groove ensures the blade slider button doesn't bottom out.
Over-Board Marker Holster
A heavy-duty saddle bracket designed to hang over a standard 19.5mm whiteboard. The main U-shape slips over the board's top edge without fasteners, keeping the front face flush and out of the way. Features a single solid front extension bored out to house one standard 12mm dry erase marker vertically. Slip-fit saddle: Fits 19.5mm thick boards Marker drop: 12.5mm hole for clearance Thick walls: 5mm structural thickness for rigidity Flush construction: Fully merged geometry without seams