Reach — Gadget Lifter
Created 10 days ago
Description
A vertical reaching and lifting tool designed for scooping up single household objects like a smartphone or a game controller.
Dimensions
- Overall Height: 140 mm
- Scoop Diameter: 90 mm
- Wall Height: 15 mm
Features
- Open Front: Allows the base to slide smoothly underneath devices.
- Retaining Wall: Raised edges around the sides and back keep items from slipping off while lifting.
- Flush Handle: The vertical shaft is set as far back as possible to maximize the useable tray space.
Images
More like this
Explore more in Home & Fixtures →
Circular Scoop Reaching Stick
What it's for A 16 cm tall reaching stick with an open scoop base. Designed to securely push under small items and lift them, with an open front and a curved retaining wall at the back. Dimensions Overall Height: 160 mm Base Diameter: 100 mm Handle Diameter: 16 mm Print notes Prints upright in a single piece with no supports required. Ensure good bed adhesion for the 100 mm base plate.
SwiftScoop — Floor Retriever
A sturdy, single-piece scoop designed for retrieving items from the floor. Featuring a wide circular head with a raised back edge and a slightly bevelled front, it slides easily underneath scattered objects. Features Generous Catch Area: 120mm base plate with retaining walls on three sides. Lightweight Core: The shaft is hollowed out to save material and reduce weight. Textured Handle: Raised grip rings ensure secure handling. Printable Size: Scaled down to fit comfortably within a standard 250mm build volume.
86mm Windowsill Tomato Seedling Tray
12-cell starter tray dimensioned for narrow residential windowsills. Fits a standard 86mm or deeper sill plate. Do not attempt to balance this on half-depth ornamental ledges; the 253mm overall length requires a completely flat run to avoid stressing the joined top lip when loaded with wet soil. Fitment Specs Clearance Required: 86mm (W) x 253mm (L) minimum flat sill surface. Cell Dimensions: 50mm depth. 40mm square top bore tapering to a 32mm base. Extraction: 1.2mm floor thickness permits mechanical release of the tomato soil plug via bottom pressure. Drainage: Single 8mm center bore per cell. Will drain immediately onto the host surface—must be paired with an 86x253mm minimum drip pan.
PK360 Combustion Engine adapter
Allows connecting combustion engine grill fan to a pk360 grill intake vent
Pendant Ceiling Canopy
A clean, three-piece ceiling canopy designed to bridge a jagged hole and manage a pendant cable. The mechanism borrows from standard flat-pack fixture hardware: a central core hangs from the ceiling hook and threads through the main cover, while a hex nut clamps the cover tight against the drywall. The core is hollow to let your two-wire cable pass through cleanly, with side-exits at the top so the wiring doesn't foul the hanging eyelet. Features 105mm Canopy: Leaves a comfortable margin over an 80mm hole to hide chipped plaster. Hollow Core: 8mm internal channel easily clears standard twin-core lighting cable. Thread Clearance: The nut is cut with an oversized 16.8mm thread for a smooth, bind-free fit on standard FDM prints. Support-Free: All three pieces sit flat on the bed and require no supports to run.
Threaded Lamp Socket Cap
A threaded end cap designed to enclose the rear wiring of a light bulb socket. Features a 5mm cable pass-through hole and an internal thread sized with clearance for a 27.4mm socket back. Overall height: 22mm Wire pass-through: 5mm diameter Threading: 1.5mm pitch, cut with clearance for an easy fit Exterior: Plain cylinder with 1mm chamfered edges