Scooped 96mm Cabinet Pull
Created 1 months ago
Description
A modern cylindrical cabinet pull featuring a wide, shallow finger scoop on the rear face. It stands off the cabinet by 35mm to allow natural grip clearance, designed around standard 96mm screw centers for direct replacement of existing hardware.
Remix Hooks
- Screw Centers: Currently spaced at 96mm for standard cabinets, but easily stretched to 128mm or 160mm by shifting the standoffs along the X-axis.
- Bar Dimensions: The 16mm diameter and 130mm overall length can be scaled up for heavier pantry doors or scaled down to 12mm for a sleeker profile on lighter drawers.
- Finger Scoop: Cut using a 36mm cylinder subtracted from the rear. Adjusting the diameter or offset of this cutter will deepen or shallow out the grip.
Images
More like this
Explore more in Home & Fixtures →
Wall-Mounted Bedside Floating Shelf
What it's for A sleek floating shelf for beside the bed at about head height, sized for an ornament or a small potted plant. A back plate with four countersunk screw holes fixes it to the wall, and two triangular brackets support the top. The design is symmetrical, so printing two gives a matching pair for each side of the bed. Dimensions Shelf top: 200 × 120 × 12 mm, rounded edges Back plate: 170 mm wide, 6 mm thick, 70 mm tall including the shelf Screw holes: four, 4.5 mm shank with 9 mm countersink, set 80 mm apart, the upper pair just below the shelf Brackets: two, 6 mm thick, at X ±70 mm Print notes Prints with the top face on the bed, with no supports needed. Use wall plugs suited to your wall type and countersunk screws with heads up to 9 mm. Remix ideas Narrow the shelf for tighter spaces. Add a small front lip to keep ornaments from sliding off. Add a cable notch for a bedside lamp.
Bote de basura innovador
Bote de basura con tres compartimentos para orgánicos, reciclables y basura general. Evita que todo termine mezclado en una sola bolsa y que haya que tocar la tapa con las manos sucias. Cada compartimento tiene su propia abertura con trampilla de color. Dos sensores al frente detectan a la persona que se acerca, una pantalla indica el nivel de llenado, un panel solar inclinado en la parte trasera alimenta la electrónica y cuatro ruedas permiten moverlo. Datos clave Diámetro del cuerpo: 240 mm; altura total sin panel: unos 346 mm Tres sectores de 120° separados por divisiones de 3 mm Aberturas de 76 mm de diámetro, una por compartimento Ruedas de 36 mm en cuatro soportes Impresión por piezas: cuerpo, tapa, chasis, ruedas y panel; paredes de 3 mm, sin soportes en el cuerpo La electrónica (sensores, pantalla, motores) no está incluida: el modelo solo aporta alojamientos y forma
Cardboard Sign Corner Holder for Wall
A cardboard sign corner holder that ends the problem of taping or tacking a sign to the wall. The triangular pocket slips over a corner of 3 mm cardboard, like a photo corner, and the flat back takes a removable adhesive pad. Slot height: 3.4 mm for 3 mm cardboard Leg length: 40 mm per corner Back plate: 2 mm, flat side faces the wall Front lip: 1.6 mm, with a cut-out window Print: flat on the back, no supports, one per corner (4 for a sign)
Tapered Tunnel Adapter 20x23 to 19x19
A short tapered sleeve for a hole that is too big or the wrong shape for what goes in it. This one is 7 mm long with thin 0.6 mm walls, so it slips in without eating the opening. Key numbers Large end outer size: 20 x 23 mm Small end outer size: 19 x 19 mm Length: 7 mm Wall thickness: 0.6 mm Open all the way through Printing Print standing on the large end, no supports needed Walls are about 1-2 nozzle widths thick, so use a 0.4 mm nozzle and 1-2 perimeters No clearance is added; scale slightly if the hole is tight
Veranda Back Railing Bays
Railing section for the back half of the veranda, made to print separately from the deck base. It covers the long left side and the short end, with pickets running between a lower and a top rail. Left side bay with end post, plus the end-span railing across the back Pickets about every 110 mm at full scale Posts sit flat on the deck surface for gluing Same scale and position as the deck base, so the pieces line up
Y-Rohrstück 75 auf 39 mm mit Steckende
Y-Rohrstück, bei dem ein weiteres Rohr auf dem oberen Ende nicht richtig sitzt, weil kein gerades Stück zum Aufstecken vorhanden ist. Der obere Abschnitt hat jetzt ein 20 mm langes gerades Ende mit 39 mm Außendurchmesser. Unterer Teil: 75 mm Außendurchmesser, 30 mm lang Konus: 30 mm lang, von 75 auf 39 mm Steckende oben: 39 mm Außendurchmesser, 20 mm lang Abzweig: 39 mm Außendurchmesser, 48° zur Rohrachse, schneidet die obere Öffnung nicht Wandstärke: 2 mm überall Druck: aufrecht auf der 75-mm-Öffnung, der Abzweig braucht Stützen