Signo DX UMR-1 Custom Pen
Created 1 months ago
Description
A precision-fit pen chassis designed exclusively around the Uni-ball Signo DX (UMR-1) refill.
The design consists of three pieces: a threaded barrel, a tapered front grip section that locks the refill shoulder in place, and a flush-fitting cap.
Fitment Notes
- Refill: Uni-ball Signo DX / UMR-1 series (typically 0.38mm or 0.28mm capped refills).
- Not Compatible With: Retractable UMR-83 refills (Signo RT) — they lack the rigid front shoulder this grip relies on to stop the tip.
- Assembly: The grip threads onto the barrel using an M8x1 thread. The cap slides completely over the grip and friction-locks onto a slight taper at the front of the barrel.
- Tuning: If the refill rattles slightly from manufacturing tolerances, a tiny piece of foam or paper in the bottom of the barrel will compress it tight.
Photos
Technical views
More like this
Explore more in Desk & Tech →
Foldable Snap-Fit Phone Stand
A rugged, fully printable foldable phone stand. It is printed in three flat pieces that snap together securely, allowing it to fold completely flat for travel. Features Adjustable Angles: Features 7 resting notches on the base plate to precisely control the screen angle. Snap-Fit Hinges: Uses C-clip snap joints that grip firmly onto 6mm pins without requiring any extra hardware. Travel-Ready: Folds down to a flat profile when not in use. Print Instructions Print flat on the bed as oriented. Standard PLA or PETG works perfectly. Ensure good bed adhesion for the flat plates. The snap-fit hinges are designed with a 0.4mm clearance — they will require a firm push to snap into place during assembly, but will hold tight thereafter.
Clicker Fidget Keycaps A–Z, Heart, Star, Flower
Loose keycaps for clicker fidget toys: no more generic blank caps when a custom letter or symbol is wanted. Each cap is a separate 18 × 18 mm square with rounded corners and a hollow underside, with a bold red legend inlaid into a white top. Set: letters A–Z plus heart, star and flower (29 caps) Size: 18 × 18 mm, 9 mm tall Stem: MX-style cross socket, 4.1 × 1.35 mm arms Legend: bold, centered, inlaid 0.8 mm into the top Print: top face up, no supports needed for the caps; use white and red filament (or a pause for the colour change) Keys are spaced apart on the plate and not joined; split into individual files in the slicer
Cartoon Cloud MagSafe Stand
A heavy, volumetric desktop stand for the iPhone 15 with a friction-fit MagSafe socket. The body is built as a fully rounded, bubbling cloud with a perfectly sheared flat front to carry the phone and a sliced flat bottom for desk stability. Mounted on a heavy, hidden pill base holding a 20-degree back-tilt. Fit: 56.5 mm cutout for a standard MagSafe puck, with an 8 mm channel for the cable routing down the face. Format: Two-piece assembly. The cloud and the base print separately and socket together. Volume: Bubbly 3D geometry across the back and sides; dead flat front surface for phone rest.
Retro Soda Can Pen Cup
Pop-art Americana meets desk organization. This stylized, flared-base replica channels the iconic silhouette of a vintage soda can, reimagined as a completely tip-proof desktop vessel. The deep maroon body bears embossed typography that conforms perfectly to the curved shell, while the aggressively flared bottom ensures your heaviest shears and tallest pens won't knock it over. Wide-Stance Base: A 96mm flared bottom eliminates the tipping hazard of standard cylindrical cups. Embossed Typography: Raised vintage lettering catches the light and adds a tactile element to the shell. Deep Well: Drops 115mm deep to securely cradle full-length pens, markers, and workspace tools.
Fidget Spinner Planetario Ø70 mm
Fidget spinner a ingranaggi planetari stampabile in un solo pezzo (print-in-place), diametro esterno 70 mm, con ingranaggio solare centrale, 5 satelliti e anello esterno dentato internamente. L'anello è alleggerito da 10 fori passanti e non ha coperchi, così gli ingranaggi restano visibili. Diametro esterno: 70 mm, spessore 8 mm Modulo 1,5; solare 15 denti, satelliti 10 denti, corona 35 denti Denti elicoidali a spina di pesce (25°) che trattengono i satelliti senza assi Gioco sui denti: 0,25 mm Fori centrali Ø7 mm (solare) e Ø5 mm (satelliti) per alleggerire Stampa piatta, senza supporti; PLA o PETG
ESP32 Enclosure with 1.3 Inch OLED Lid
Two-piece enclosure for a 30-pin ESP32-WROOM-32 DevKit V1 with a 1.3 inch SH1106 OLED mounted in the lid. Shown exploded with heat inserts and M3 screws aligned to the corner holes. The lid has a 35.5 x 34.5 mm recess on the underside that holds the OLED PCB, and a 35.5 x 20.5 mm window through the front panel for the visible display area. ESP32 pocket: 52 x 28 mm, 14 mm deep Outer size: about 56.8 x 40.4 mm, 2.4 mm walls Front USB-C slot, 10 x 4 mm Four corner screw holes for M3 screws and heat inserts Front panel thickness behind the window: 1.6 mm Print the lid face-down for a clean front surface.