Slotted Under-Desk Cable Tray
Created yesterday
Description
What it's for
Designed to mount directly to the underside of a desk to hold a power strip and bundle loose cables, clearing floor hazards. The open U-channel features vertical slots along both long edges, allowing cables to drop in from above and providing anchor points for hook-and-loop straps to lash down the strip. Prints flat on its back without supports.
Dimensions
- Overall footprint: 350 x 100 x 60 mm
- Inner channel capacity: 350 x 64 x 57 mm
- Cable slots: 8 mm wide, 45 mm deep, spaced at 35 mm intervals
- Mounting: 10 countersunk screw holes positioned along the outer flanges
Remix ideas
- Adjust the overall length to match specific power strips or desk spans.
- Widen the side slots to accommodate heavy-gauge monitor cables or display connectors.
- Increase the wall thickness to support heavier power supplies and transformers.
Photos
Technical views
More like this
Explore more in Desk & Tech →
Oversized Desk Device Stand
An oversized, stable desktop stand designed for larger devices. It uses a thick, continuous profile with a wide footprint and a deep front cradle to keep heavy hardware from tipping backwards. The underside is channeled out to ensure the stand rests securely on its front and back edges without rocking. Remix Variables Total Width: Currently 100 mm. Drop this to 60 mm if you want a slimmer profile, or stretch it to 150 mm for a massive tablet. Backrest Height: Reaches 110 mm off the desk. You can lower the rear profile points if your device sits fine on a shorter spine. Cradle Gap: Set at roughly 24 mm to accommodate thick cases or ruggedized hardware. Pull the inner cradle coordinates forward if you need a tighter grip on bare devices.
Print-in-Place Desk Gyro
Idle hands end up disassembling pens or clicking loose hardware, which drives everyone else in the room crazy. This is a quiet, self-contained fix. Four concentric rings spin freely inside each other on tiny internal pivots, printed fully assembled as one part. Tolerances and Print Details Gaps: 0.4mm clearance between each ring prevents fusing. Pivots: 0.5mm radial clearance on the pins to keep them spinning smoothly once cracked loose. Overhangs: The pivots use a diamond profile to grow out at 45 degrees, requiring zero supports. Pop it off the plate, snap the axes loose, and you're good.
Steam Deck Tabletop Cradle
A solid tabletop stand designed to securely cradle a Steam Deck at a 60-degree viewing angle for hands-free play. The geometry supports the handheld securely by its lower grips, keeping the screen and controls entirely clear. A central routing channel runs straight through the base to manage the charging cable, allowing the device to remain powered without awkward cable bends or putting pressure on the port. Features: 140mm wide stance for stable tabletop placement 60-degree resting angle optimized for comfortable viewing 13mm integrated bottom channel to easily clear a standard 10mm charging cable Fully rounded edges for comfortable handling and clean printing
Manta Contour Console Grips
Echoing the sweeping, organic lines of marine life, these bionic-contoured grips transform a rigid, slim handheld into a natural extension of the hands. The bulbous outer shell fills the empty space of a relaxed grip, completely banishing the cramped claw-hand fatigue of marathon sessions. A precision-channeled core seamlessly bites onto the edges of the device without crowding the action. Design Specs The Swell: Sweeps 25mm outward from the console body to fully support the lower palm. The Fit: Parallel channels lock cleanly over a 10mm chassis edge, utilizing lead-in chamfers for a smooth, scrape-free slide. The Clearance: A minimalist 4mm front lip ensures thumbs never collide with the plastic while reaching for the D-pad. The Fabrication: Symmetrical vertical extrusions designed to sit flat on the build plate without requiring supports.
FocusLine — Reader Aid Ruler
A low-profile reader aid and metric ruler designed to block out surrounding text on standard A4 pages, keeping focus on a single line. Features Reading Window: 170mm wide slot precisely sized for A4 documents. Metric Ruler: 18cm top edge with 1mm increments for quick measurements. Personalized: Raised name plate with elegant diamond accents. Print Notes Prints perfectly flat with no supports required. Add a filament swap at 2.0mm to highlight the text and accents against the base.
DataStack — Enclosure Core
A lightweight, 4-bay enclosure body for 2.5" SATA HDDs. Features Stripped-down chassis with extensive material-saving cutouts Integrated rails for 4 drives Rear bosses for mounting a custom PCB backplane Designed to be printed on end (resting on the back faces) to avoid internal supports.