Spill-Proof Heart Bag
Created yesterday
Remixed once
Description
Open bags dump their contents the second they tip over. This small hard-shell tote adds internal retaining flaps just above the midpoint to keep your stuff where it belongs, while a flat-printing pearl-beaded strap hooks onto thin side-loops.
The Details
- Retaining flaps: Sliced down to a razor-thin 0.4mm, sitting at 30mm height.
- Handle loops: Pushed out past the terminal pearls so the rings don't jam when you thread a clasp through them.
- Shell walls: 1.5mm thin, keeping the whole assembly light.
Images
More like this
Explore more in Storage & Organization →
Y2K Heart Tote
A rigid little handbag that keeps its contents from spilling when tipped. This remix pushes the internal retaining flaps to their absolute limits—stretching them fully into the inner side-walls and shaving them down to a single 0.2mm printable layer, while leaving a secure central gap to retrieve items. Construction Notes Retaining Flaps: Extended to 57mm to anchor directly into the bag's sloping walls, shaved down to 0.2mm thick. Heart Motif: Raised 1.5mm off the front face. Beaded Handle: Designed to print entirely flat, hooking onto the thin side loops after assembly.
HDX Tote Rack Bracket
A heavy-duty 90-degree corner bracket for 2x4 lumber frames, designed specifically to cradle the corners of HDX 27-gallon storage totes. 2-way 90-degree internal butt joint for standard 2x4 lumber Staggered 5.5 mm screw holes to prevent fastener collision Integrated 2-inch solid outer lip keeps totes from sliding off the frame Thickened outer corner pillar handles heavy vertical loads
HDX Tote Corner Bracket
A heavy-duty 90-degree corner bracket for 2x4 lumber frames, designed specifically to cradle the corners of HDX 27-gallon storage totes. 2-way 90-degree internal butt joint for standard 2x4 lumber Staggered 5.5 mm screw holes to prevent fastener collision, plus end-cap and high-wall mounts Integrated 2-inch solid outer lip keeps totes from sliding off the frame Thickened outer corner pillar handles heavy vertical loads Vertical and top-face custom engravings Oval, tapered pass-through holes for bungee hooks
C and 9V Storage Adapters
Drops directly into standard C-cell and 9V battery slots. Adapts the bore to hold a single CR2 cell securely for storage purposes only. Does not include electrical contacts. Fitment Notes C-Cell Profile: 26.2mm outer diameter. 9V Profile: 26.5mm x 17.5mm footprint. CR2 Bore: 16.2mm diameter, 15mm depth. This leaves approximately 12mm of a standard CR2 battery exposed for easy retrieval. Clearance Check: The 9V adapter relies on a 0.65mm side wall around the bore. Ensure your printer's extrusion multiplier is calibrated for thin walls.
Cruzer Blade Sliding Enclosure
A thick-walled, two-part protective enclosure dimensioned specifically for the SanDisk Cruzer Blade. The assembly consists of a main retaining shell and a sliding captive lid. Fitment: Internal cavity measures 42.3 x 18.4 x 8.0 mm (allowing 0.5 mm clearance around the drive). Retention: Dual 0.4 mm internal Z-axis ribs provide friction fit against the drive housing. A solid rear wall prevents push-through. Mechanism: The left-side lid operates on dual 1.5 mm Y-axis rail grooves, featuring spherical detents at both ends of travel for locked open and closed states. Construction: 2.5 mm exterior walls in all directions for rigid PETG FDM printing. The top face includes a 1 mm recess for labelling and a subtracted diagonal chevron pattern.
52.5x89.9mm Utility Box
Plain utility box built to an exact 52.5mm by 89.9mm footprint, standing 14mm tall. Sized for custom internal layouts or dropping in an existing block of components. Measurements to check: Outer Profile: 52.5mm x 89.9mm Overall Height: 14mm Inner Cavity: 49.5mm x 86.9mm Usable Depth: 12.5mm (1.5mm thick floor) Walls are 1.5mm thick all around. If the item you are putting in here is exactly 49.5mm wide, it will be a friction fit; you may want to scale up slightly if it needs drop-in clearance.