Staggered 6-Peg Wall Mug Rack
Created 5 months ago
Description
This staggered wall-mounted mug rack is the perfect way to display and store up to six of your favorite coffee or tea mugs. The clever two-row offset design ensures that the mugs hang neatly without their rims bumping into or chipping one another. Each of the six sturdy pegs extends approximately 50mm outward with a 12mm thickness, providing ample space even for mugs with extra chunky handles. Beyond just holding drinkware in the kitchen, this versatile hanger can easily be repurposed in an entryway for keys and light jackets, or in a craft room for organizing spools and tools. The sturdy backboard measures around 360mm wide and includes four built-in countersunk mounting holes for a secure installation against any flat surface. For the most durable 3D print, it is highly recommended to use strong materials like PETG or ABS, while increasing your wall perimeters and infill density to comfortably bear the weight of heavy ceramics. Creative remixers might want to consider extending the backplate to add even more rows for an expansive mug wall, customizing the peg ends with fun shapes like coffee beans, or modifying the mounting holes to fit specific hardware configurations.
Images
More like this
Explore more in Home & Fixtures →
Lifebuoy — Wall Key Rack
Lifebuoy is a wall-mounted key rack shaped like a beach lifeguard buoy, with a red body, white LIFEGUARD lettering and five sturdy hooks. Features 230 mm long stadium-shaped body, 70 mm tall, 14 mm deep Letters as a separate white piece set into a pocket in the red body Five round-tipped hooks along the lower front Two rear keyhole-style screw holes with counterbores Flat back for printing without supports Print notes Print the body and the letters in separate colours (PLA, 0.4 mm nozzle), back face down.
Wall-Mounted Bedside Floating Shelf
What it's for A sleek floating shelf for beside the bed at about head height, sized for an ornament or a small potted plant. A back plate with four countersunk screw holes fixes it to the wall, and two triangular brackets support the top. The design is symmetrical, so printing two gives a matching pair for each side of the bed. Dimensions Shelf top: 200 × 120 × 12 mm, rounded edges Back plate: 170 mm wide, 6 mm thick, 70 mm tall including the shelf Screw holes: four, 4.5 mm shank with 9 mm countersink, set 80 mm apart, the upper pair just below the shelf Brackets: two, 6 mm thick, at X ±70 mm Print notes Prints with the top face on the bed, with no supports needed. Use wall plugs suited to your wall type and countersunk screws with heads up to 9 mm. Remix ideas Narrow the shelf for tighter spaces. Add a small front lip to keep ornaments from sliding off. Add a cable notch for a bedside lamp.
Cardboard Sign Corner Holder for Wall
A cardboard sign corner holder that ends the problem of taping or tacking a sign to the wall. The triangular pocket slips over a corner of 3 mm cardboard, like a photo corner, and the flat back takes a removable adhesive pad. Slot height: 3.4 mm for 3 mm cardboard Leg length: 40 mm per corner Back plate: 2 mm, flat side faces the wall Front lip: 1.6 mm, with a cut-out window Print: flat on the back, no supports, one per corner (4 for a sign)
Wall Shelf, 20 cm Glue-On
A small wall shelf that sits flat against the wall and glues on, with no drilling and no screws that miss the stud. The tall back plate gives the adhesive a big flat face, and two triangular gussets stop the front edge from sagging or peeling off. Key numbers Shelf top: 200 mm long x 80 mm deep x 4 mm thick Back plate: 200 x 40 mm, 4 mm thick, flat on the wall side Two gussets, 4 mm thick, each 34 mm tall Print: shelf upright on its back plate or flat on the top, no supports needed with the plate down; PETG or PLA, 3+ perimeters Glue: construction adhesive or mounting tape on the back plate face
Under-Sink Bag Roll Dispenser Barrel
A grocery-store bag-roll dispenser, shrunk down and bolted under the sink. A snug barrel holds a 60 mm roll of trash bags, and the next bag's edge hangs out of a slot in the bottom, ready to grab. A serrated lip along the front of the slot tears each bag off cleanly, so there's no more digging for the end of the roll. The barrel is closed at one end and open at the other. A separate press-fit end cap seals the open end once the roll is loaded. Design notes Bore: 64 mm diameter for a 60 mm roll, with 3 mm walls. Length: 130 mm overall. Dispensing slot: 20 mm wide, running along the bottom of the barrel. Tear lip: a row of downward-pointing teeth at 4 mm pitch on the front edge of the slot. Mounting: a flat back plate with two countersunk screw holes. The holes sit above the barrel, so screws never cross the bore. End cap: printed as its own piece, with a plug that fits the bore and a flange that matches the barrel. Print and remix notes The teeth are the lowest points as modelled, so plan on supports under the barrel. Printing the part on its back plate is an easy re-orientation. Slot length, tooth pitch and screw spacing are the obvious values to adjust for other roll sizes or cabinet layouts.
Bote de basura innovador
Bote de basura con tres compartimentos para orgánicos, reciclables y basura general. Evita que todo termine mezclado en una sola bolsa y que haya que tocar la tapa con las manos sucias. Cada compartimento tiene su propia abertura con trampilla de color. Dos sensores al frente detectan a la persona que se acerca, una pantalla indica el nivel de llenado, un panel solar inclinado en la parte trasera alimenta la electrónica y cuatro ruedas permiten moverlo. Datos clave Diámetro del cuerpo: 240 mm; altura total sin panel: unos 346 mm Tres sectores de 120° separados por divisiones de 3 mm Aberturas de 76 mm de diámetro, una por compartimento Ruedas de 36 mm en cuatro soportes Impresión por piezas: cuerpo, tapa, chasis, ruedas y panel; paredes de 3 mm, sin soportes en el cuerpo La electrónica (sensores, pantalla, motores) no está incluida: el modelo solo aporta alojamientos y forma