Stepped Round Stamp Handle
Created 1 months ago
Description
A classic block-style handle designed to mount a 40mm round rubber stamp die. An embossed tactile arrow sits on the top face, pointing to 12 o'clock for immediate physical orientation before stamping. The stepped design keeps fingers clear of the ink while providing a solid grip post.
Remix Hooks
- Base Dimensions: Currently 40mm in diameter and 10mm thick. Scale the diameter to match different stamp sizes, or thicken the plate to distribute pressure over a wider area.
- Grip Post: Set at a 25mm diameter and 30mm tall. Easily extended for larger hands, or swap the standard cylinder for a tapered profile.
- Orientation Marker: The top arrow is a simple 1mm extrusion. Swap the polygon for path text, an embossed logo, or a different tactile indicator.
Images
More like this
Explore more in Desk & Tech →
Fidget Spinner Planetario Ø70 mm
Fidget spinner a ingranaggi planetari stampabile in un solo pezzo (print-in-place), diametro esterno 70 mm, con ingranaggio solare centrale, 5 satelliti e anello esterno dentato internamente. L'anello è alleggerito da 10 fori passanti e non ha coperchi, così gli ingranaggi restano visibili. Diametro esterno: 70 mm, spessore 8 mm Modulo 1,5; solare 15 denti, satelliti 10 denti, corona 35 denti Denti elicoidali a spina di pesce (25°) che trattengono i satelliti senza assi Gioco sui denti: 0,25 mm Fori centrali Ø7 mm (solare) e Ø5 mm (satelliti) per alleggerire Stampa piatta, senza supporti; PLA o PETG
Foldable Snap-Fit Phone Stand
A rugged, fully printable foldable phone stand. It is printed in three flat pieces that snap together securely, allowing it to fold completely flat for travel. Features Adjustable Angles: Features 7 resting notches on the base plate to precisely control the screen angle. Snap-Fit Hinges: Uses C-clip snap joints that grip firmly onto 6mm pins without requiring any extra hardware. Travel-Ready: Folds down to a flat profile when not in use. Print Instructions Print flat on the bed as oriented. Standard PLA or PETG works perfectly. Ensure good bed adhesion for the flat plates. The snap-fit hinges are designed with a 0.4mm clearance — they will require a firm push to snap into place during assembly, but will hold tight thereafter.
Drehscheibe Neu
Zwei übereinanderliegende Scheiben (Ø75 mm, je 2 mm dick) mit Randzapfen, die sich gegeneinander drehen lassen. Der Zapfen sitzt an der unteren Scheibe, geht durch die obere und hat oben einen flachen Kopf, der die obere Scheibe hält. Untere Scheibe mit Ø30-mm-Mittelloch Zapfen Ø6 mm, 30 mm links der Mitte Loch in der oberen Scheibe Ø7 mm (0,5 mm Spiel pro Seite) Kopf Ø10 mm, 1,5 mm dick, 0,3 mm über der oberen Scheibe 0,3 mm Spalt zwischen den Scheiben, druckbar in einem Stück Obere Scheibe ist geschlossen, nur Drehbewegung
Cartoon Cloud MagSafe Stand
A heavy, volumetric desktop stand for the iPhone 15 with a friction-fit MagSafe socket. The body is built as a fully rounded, bubbling cloud with a perfectly sheared flat front to carry the phone and a sliced flat bottom for desk stability. Mounted on a heavy, hidden pill base holding a 20-degree back-tilt. Fit: 56.5 mm cutout for a standard MagSafe puck, with an 8 mm channel for the cable routing down the face. Format: Two-piece assembly. The cloud and the base print separately and socket together. Volume: Bubbly 3D geometry across the back and sides; dead flat front surface for phone rest.
Print-in-Place Concentric Rings
A set of five concentric rings designed to print in place as a single piece. Excellent as a clearance test for your printer or just a satisfying desk fidget. Remix Hooks This design is built on a few key parameters that are begging to be tweaked depending on what you want to use it for: Wall Thickness: Currently set to 2mm for a solid feel. Clearance: Set to 0.4mm gap between rings. If your printer is finely tuned, drop this to 0.2mm or 0.3mm for tighter tolerances. Height: Currently 8mm, but you can scale this up on the Z-axis to turn them into nesting tubes. Inner Diameter: Starts exactly at 25mm to fit over standard dowels or large fingers.
Monolith — MagSafe Dock
Monolith is an architectural desk stand built specifically for the Apple MagSafe charger. It's designed to read as a single sweeping piece of tech, dropping the wire invisibly through the core and directly out underneath the base pad. Features Perfect Fit: Toleranced to 56.5mm to lightly grip the standard MagSafe puck. Seamless Route: The cable threads cleanly inside the stem and travels down to the desk surface. Ergonomic Tilt: Features a 50-degree backrest optimized for at-desk use and FaceID unlocking. Vented Spine: Deep architectural slots line the back for a leaner profile.