Description
For an electric fan with a broken switch
Photos
Technical views
More like this
Explore more in Home & Fixtures →
110mm Hex-Mesh Planter Pot
A tapered cover pot designed for standard 12cm nursery planters. The base and walls feature a staggered hexagonal mesh that promotes extensive airflow and rapid drainage. Dimensions: 150mm outer top diameter, 140mm inner top, tapering to fit a 120mm base. Total height is 120mm. Printability: The wall hexagons are rotated so their corners point straight up, yielding sharp 60-degree overhangs that print perfectly without supports. Durability: Uniform 5mm walls provide rigidity even with the extensive mesh cutouts.
BSP 3/4 to 3/4 Hose Barb
An adapter coupling designed to step straight from a 3/4" BSP threaded fixture to a heavy hose. The hex nut transition is chamfered for support-free printing when oriented barb-down on the build plate. Dimensions & Fit Thread: 3/4" BSP (26.4mm OD, 14 TPI) Barb: 21.2mm maximum outer diameter (5-stage reversed taper) Bore: Steps from 20mm at the threaded end down to 14mm at the barb to maximize flow rate. Wrench Flats: ~31mm flat-to-flat Printing: Print barb-side down; no supports required.
Structural L-Bracket
Joints flex and shelves droop when gravity gets a say. This stops that. A blunt, rigid corner bracket with an inner chamfer that prevents the corner from tearing under load. Specs Arms: 50mm (outer length) Thickness: 4mm Width: 20mm Mounting: Two 5mm through-holes centered on the flat sections. Print this on its side (the flat L shape against the bed) so the layer lines run continuously along the bend. That prevents snapping.
Modular Ventilation Panel
A modular 90cm ventilation panel, divided into printable interlocking segments. Includes four 20cm sections and one 10cm end piece. Features puzzle-style joints for secure assembly. Integrated vertical venting slots.
Scooped 96mm Cabinet Pull
A modern cylindrical cabinet pull featuring a wide, shallow finger scoop on the rear face. It stands off the cabinet by 35mm to allow natural grip clearance, designed around standard 96mm screw centers for direct replacement of existing hardware. Remix Hooks Screw Centers: Currently spaced at 96mm for standard cabinets, but easily stretched to 128mm or 160mm by shifting the standoffs along the X-axis. Bar Dimensions: The 16mm diameter and 130mm overall length can be scaled up for heavier pantry doors or scaled down to 12mm for a sleeker profile on lighter drawers. Finger Scoop: Cut using a 36mm cylinder subtracted from the rear. Adjusting the diameter or offset of this cutter will deepen or shallow out the grip.
Tapered Plug For salt shakers
A solid tapered plug to replace the rubber foot that vanished from the chair leg three moves ago, ending the tilt that sends your coffee sliding across the desk. It wedges directly into a standard hollow tube or serves as a standalone standoff. Dimensions for fit: Base diameter: 10 mm (the wide end sitting on the floor) Top diameter: 7 mm (the narrow end driving into the socket) Height: 8 mm clearance