Tabletop Wildlife Alert, 100 mm Diamond Sign
Created today
Description
Modular tabletop wildlife-warning prototype printed as separate parts that bolt together: base, three pole sections, four brackets, electronics enclosure with lid, PIR sensor housing with rain hood and lid, amber light housing with lid, and a diamond sign reading WILDLIFE CROSSING with no graphic.
The stack runs bottom to top: electronics enclosure, PIR sensor facing forward, two amber LED openings, then the sign. Each housing screws to its own bracket, and each bracket clamps onto the pole with one cross-screw.
Dimensions (mm, outside)
- Electronics enclosure: 70 × 60 × 50, interior about 65 × 57 × 45, with lid
- PIR housing: 60 × 40 × 35, 23 mm lens opening, rain hood, with lid
- Light housing: 70 × 35 × 30, two 8 mm LED openings, with lid
- Sign: diamond 100 point to point, 3 mm thick
- Base: 100 × 84 × 6
- Pole: three sections, 20 × 20 × 58
- Overall height: about 224
To confirm before printing
- Controller board size (a full Uno will not fit the interior)
- PIR lens diameter and LED diameter (23 mm and 8 mm are placeholders)
- Printer build area
- Electronics are untested
Images
More like this
Explore more in Storage & Organization →
Tabletop Wildlife Alert, 100 mm Diamond Sign
Modular tabletop wildlife-warning prototype printed as separate parts that bolt together: base, three pole sections, four brackets, electronics enclosure with lid, PIR sensor housing with rain hood and lid, amber light housing with lid, and a diamond sign reading WILDLIFE CROSSING with no graphic. The stack runs bottom to top: electronics enclosure, PIR sensor facing forward, two amber LED openings, then the sign. Each housing screws to its own bracket, and each bracket clamps onto the pole with one cross-screw. Dimensions (mm, outside) Electronics enclosure: 70 × 60 × 50, interior about 65 × 57 × 45, with lid PIR housing: 60 × 40 × 35, 23 mm lens opening, rain hood, with lid Light housing: 70 × 35 × 30, two 8 mm LED openings, with lid Sign: diamond 100 point to point, 3 mm thick Base: 100 × 84 × 6 Pole: three sections, 20 × 20 × 58 Overall height: about 224 To confirm before printing Controller board size (a full Uno will not fit the interior) PIR lens diameter and LED diameter (23 mm and 8 mm are placeholders) Printer build area Electronics are untested
Caixa 120x120x50 mm Estação Meteorológica
Caixa quadrada de 120 × 120 × 50 mm com paredes de 2 mm e tampa separada, fixada por quatro parafusos M3 nos cantos. Possui abertura para display, chave gangorra, entrada USB-C e fendas de ventilação, além de duas fendas para alça na parte superior da lateral. Parafusos: 4 colunas de canto, furo de 2,8 mm na base e 3,4 mm com escareado na tampa Display: abertura de 24,4 × 14,4 mm na tampa Chave gangorra: abertura de 15,3 × 10,3 mm na tampa USB-C: abertura de 9 × 4 mm na lateral +X Alça: duas fendas de 16 × 4 mm no alto da parede +Y, a 30 mm do centro para cada lado Ventilação: fendas nas laterais, longe das colunas, com fendas extras na região dos sensores Protoboard: dois trilhos baixos no fundo como guia provisório Impressão: base e tampa separadas, sem suportes necessários
Dual Crossover Enclosure
A scalable enclosure updated to house two crossover PCBs vertically. Features integrated external mounting tabs for MDF, top-edge ventilation slots for passive cooling, and a reinforced front panel with standard 19mm-spaced 4.5mm holes for banana plug binding posts. Internal capacity: 200x170x60mm Cooling: 4mm vertical ventilation slots Mounting: 4x external tabs with countersunk 4mm screw holes
Vented Power Supply Enclosure
What it's for A custom-sized, two-part vented enclosure designed to hold a 111x79x36mm power supply. It features side-mounted cooling vents, a solid base, and wire-routing holes positioned near the bottom of the narrow end. Dimensions External size: 99 x 131 x 42 mm (main box), plus the flush-fitting lid. Internal space: The central cavity between the corner screw pillars provides a clear 83 x 115 mm footprint, allowing a 2 mm clearance gap on all sides for the 111 x 79 mm power supply unit. Wire routing: Two 7mm diameter holes on the narrow end for cable pass-through. Assembly The lid secures into the four corner pillars using standard M3 screws. The interior features a small alignment lip on the lid to ensure it seats squarely against the posts.
Endgame Robotics Enclosure
A rugged, multi-part enclosure designed for robotic interfaces and smart control nodes. The three-piece split allows easy assembly, with a deep main chassis to house microcontrollers and batteries, capped by a clean windowed bezel and a vented back cover. Front Bezel: Features a recessed touch panel land and tiny microphone breakout holes. Main Chassis: Houses dual text debossing ("END" / "GAME"), structural columns for heat-set inserts, and a USB-C cutout. Back Cover: Includes countersunk M3 mounting holes, an expansion module bay, and a hexagonal vent grille.
Vented Equipment Enclosure Box
What it's for A functional electronics or equipment enclosure featuring an integrated hinged lid, snap latch, and generous ventilation slots. Designed to print easily with the lid flat on the bed alongside the main body. Dimensions Internal capacity: 200 x 200 mm base, 60 mm deep inside Floor: 5 mm thick solid base for structural rigidity Cutouts: A 30 mm circular port on the left wall, and a 12x6 mm rectangular port on the back wall by the hinges. Cooling: Vertical slot vents on the front, left, and back panels. Assembly Once printed, mate the hinge knuckles of the lid to the base. Slide a piece of raw 1.75mm or 3mm filament (or a standard M3 bolt) straight through the hinge line to join them.