Vented Equipment Enclosure Box
Created today
Description
What it's for
A functional electronics or equipment enclosure featuring an integrated hinged lid, snap latch, and generous ventilation slots. Designed to print easily with the lid flat on the bed alongside the main body.
Dimensions
- Internal capacity: 200 x 200 mm base, 60 mm deep inside
- Floor: 5 mm thick solid base for structural rigidity
- Cutouts: A 30 mm circular port on the left wall, and a 12x6 mm rectangular port on the back wall by the hinges.
- Cooling: Vertical slot vents on the front, left, and back panels.
Assembly
Once printed, mate the hinge knuckles of the lid to the base. Slide a piece of raw 1.75mm or 3mm filament (or a standard M3 bolt) straight through the hinge line to join them.
Images
More like this
Explore more in Storage & Organization →
Magnetic Enclosure Storage Box
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements. Remix Hooks Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides. Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces. Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
Cat Head Box
Une boîte de rangement simple reprenant la silhouette d'une tête de chat, conçue pour s'imprimer sans supports. Structure : Base creuse de 40 mm de haut avec des parois de 2 mm. Couvercle : S'emboîte via une lèvre interne, avec un jeu de 0.4 mm pour un ajustement facile. Impression : Le couvercle est déjà orienté face plate vers le plateau d'impression.
Caja sci-fi para ESP32, RCA y driver
Caja para electrónica con ESP32, dos salidas RCA, jack DC hembra y un driver que no entraba cómodo: los conectores de la pared derecha quedaban pegados al driver. Ahora la caja es más larga y hay luz entre ambos. Medida exterior: 132,8 × 60 × 28,8 mm. Separación: unos 26 mm entre los postes del driver y la pared con RCA y jack. Conectores: dos agujeros de 8,2 mm (RCA) y uno de 11,2 mm (jack DC), frente a la ranura USB. Montaje: 4 tornillos M3 en las esquinas; la tapa lleva rejillas y ranuras decorativas. Impresión: base y tapa por separado, sin soportes si se imprime la base apoyada en el fondo.
Standard 140x40 Gehäuse
Gehäuseunterteil mit Außenmaßen 140 x 40 x 25 mm und 3 mm Wandstärke. Passung: Der Deckel hat eine Innenlippe mit 0,5 mm Gesamtspielraum (0,25 mm pro Seite). Druck: Beide Teile liegen flach auf dem Druckbett (Deckel liegt auf der Oberseite) und benötigen keine Stützstrukturen. Kapazität: Innenraum misst effektiv 134 x 34 x 22 mm.
VoltGrid — Print-in-Place Battery Case
A high-capacity, print-in-place storage case holding 104 AA batteries in a skeletal, material-saving grid. Designed specifically for FDM printing without supports. Features Zero Assembly: Prints flat with a fully integrated, captive 45-degree cone hinge mechanism. Just pop it off the bed and fold it closed. Skeletal Organizer: The lower grid provides 0.4 mm of clearance for 14.5 mm diameter AA batteries, but uses open walls to drastically cut filament usage and print time compared to solid block designs. Snap Latch: A flexible cantilever tab locks the lid securely down over a heavy chamfered ledge on the bottom box. Dimensions Flat Printing Footprint: 228 mm × 292 mm Closed Dimensions: 228 mm (W) × 142 mm (D) × 60 mm (H) Capacity: 104 cells (13 × 8 grid)
104-Cell AA Battery Vault
This heavy-duty grid vault keeps 104 AA cells locked down and separated. The front closure uses a single wide flex-arm cantilever built straight into the lid. It swings down to snap automatically over a retaining ledge on the base, holding the lid firmly shut until you pull the finger grip outward. Clearance: 0.4 mm gap on all latch and hinge mechanisms Lid Mechanism: Print-in-place folded hinge Print Layout: Prints fully open and flat on the bed