14 x 14 x 13 mm Palm Cavity Hand
Created today
Description
A stylised hand with the middle finger extended and the other fingers folded, with a square 14 × 14 mm cavity, 13 mm deep, centred in the palm.
Fit and check
- Cavity: 14 × 14 mm opening, 13 mm deep, open on the palm side, blind (does not exit the back of the hand).
- Palm is 22 mm thick, leaving about 9 mm of material behind the cavity floor.
- Measure the cavity after printing if a 14 mm part must fit; FDM usually shrinks holes slightly.
Not included
- No reference image was available, so proportions are generic.
- Fingernail is a small raised plate on the back of the middle finger. It does not show from the palm side.
- Scaled compact, about 104 mm tall, so it is not life-size.
Images
More like this
Explore more in Decor & Display →
Pumpkin Phantom Witch Hat Figurine
A friendly ghost rising from a jack-o'-lantern, topped with a chunky witch hat. A 70 mm single-piece figurine with a flat base and no fragile tips. Remix hooks Hat height: the cone is two stacked segments (10 mm and 8 mm); stretch them for a taller hat. Brim: 36 mm wide, 3 mm thick. Widen it, but add support beyond about 40 mm. Face: carved triangle eyes and a rectangular mouth on the pumpkin; swap in a toothy grin. Ghost arms: simple 8 mm round nubs. Lengthen them into waving arms. Pairs with: a round display plinth, or a tealight-sized base for a lamp variant.
Miniature Lifting Trolley Prototype
A demonstration-scale lifting trolley for a mechanical engineering project: rectangular frame, flat platform, four swivel casters, four corner stabilizer legs, a rotating boom base, a bottle jack, a hook with chain, and a push handle. Display model only. The real design targets 900 kg, but this print cannot lift loads. Remix hooks Frame: 80 x 130 x 8 mm. Scale it for a longer platform. Boom: 95 mm at 50 degrees. Change the angle or length to alter reach. Legs: 5 mm rods, 22 mm long. Lengthen them for a higher stance. Pairs with: a small printed crate as a payload.
Miniature Log Cabin for Toy Trains
A small log cabin for model railway layouts and toy train sets. Stacked round logs with overlapping corners form the walls, with a front door, side windows and a gable roof. Footprint about 60 x 45 mm, wall height 32 mm plus roof Door and window openings on the walls Hollow interior with open underside Two colour regions: log walls and roof Print upright on the flat base; the roof overhang is shallow and prints without supports in most cases.
Welcome — Cursive Neon Strip Holder
Welcome is a script-lettered sign form with an open channel running through every letter, built for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the flowing lettering glows like a custom neon sign. Features Heavy brush-style "Welcome" lettering 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Wire exit holes through the floor at the ends of the word Print notes Prints flat with no supports Strip width varies by brand, so check the channel width against your strip first
Extruder Figure on Cloud Plate
A printable extruder-style character lying on its back, standing in front of a solid 2 mm cloud plate. The name "Printytron" is raised on the body below the screen and is a separate part, so it can be coloured on its own. Boxy body with a recessed magenta screen showing a face with curved eyebrows and pupil indents Curved arms, thick hands, side box with teal button Hexagonal nozzle with a chunky square collar, flat on the plate Raised Space Mono lettering in its own colour Cloud backing plate whose bottom edge lines up with the hands and nozzle so the print can stand on a desk
Printytron Extruder Figure, 85 mm Wide
Desk figure of the Printytron character, styled after an extruder. It prints lying on its back, so the whole underside sits flat on the plate and no supports are needed. The body has a recessed magenta screen with a face (eyes with pupil indents, curved eyebrows, smile), a teal button on a side box, curved arms ending in round hands, and a hexagonal tapered nozzle on a square collar. "Printy.dev" is engraved below the screen. Specs Overall size: about 85 mm wide, 76 mm long, 15.5 mm tall as printed Orientation: back face down, screen facing up Body thickness: 14 mm; arms 5 mm thick; hands 10 mm thick Side box: sloped underside (about 50° from the plate) so it prints without supports Antennae: run down to the back face, so they print flat Nozzle: hexagonal cone with a flat underside along its full length, on a 22 mm square collar with a 1 mm bottom chamfer Engraving: "Printy" at 8 mm and ".dev" at 4 mm, Space Mono, about 1 mm deep Colours: yellow body, magenta screen, teal button; suited to a multicolour print or painting after printing