Wedding Anniversary Envelope Box
Created 1 months ago
Description
What it's for
A two-piece, slip-fit gift box designed specifically for presenting a 15x11cm envelope. It features elegant inner and outer debossed frames on the lid, complemented by a custom wedding anniversary inscription and interlocking rings. Finger notches in the base make retrieving the envelope effortless.
Dimensions
- Overall Outer Envelope: 164.6mm x 124.6mm
- Internal Cavity: 160mm x 120mm x 8mm
Print Notes
- Both pieces print flat on the bed.
- No supports are required.
- The debossed text and rings on the lid are tailored to print cleanly face-up.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Insert Numéro Cœur 100mm
Plaque numérotée en forme de cœur, intégrant un chiffre en typographie pixel (Press Start 2P). Conçue comme insert plat pour les centres de table. Spécifications de montage : Largeur hors-tout : 100 mm Épaisseur de la base : 3 mm (mesure critique pour l'insertion dans un porte-carte) Épaisseurs des reliefs : Bordure de 2 mm, chiffre de 2.5 mm Compatibilité : Nécessite un chevalet standard, une pince ou une fente rainurée de 3.2 mm minimum dans votre support de table. Ne tient pas debout seule.
150mm Bayonet Twist Vault
A 150mm mechanical drop-in vault, built around a 50mm twist-lift track. This replaces the friction fit of the original 150mm Borg Friendship Vault with a proper bayonet mechanism. The outer cage runs three 18mm tall helical tracks to guide the core. The top cap terminates in a 40mm hexagonal drive plug; dropping it onto the core and twisting counter-clockwise forces the payload to lift 50mm out of the chassis. Bore Clearance: The 98mm core runs inside a 102mm cage bore. Verify your machine holds tolerances on large cylinders. Support-Free: The massive 90mm flat bridges of the original have been replaced by mechanical vertical slots with 45-degree angled roofs. No supports needed for the cage or core lugs. Payload Capacity: The hollow inner void measures 76mm in diameter by 110mm deep. To assemble, line up the core lugs with the vertical entry slots on the inner walls of the cage, push down to the top stop, and twist right to lock it securely to the bottom.
5mm Bore Snowman Ornament
5mm bore snowman plate. Replaces flimsy universal-fit ornaments with a rigid, one-piece PLA blank. The main body prints completely flat at a 3.5mm maximum depth, maintaining a minimum structural web of 2.5mm throughout. Check the hanger fitment before printing: Accepts standard 4mm wire hooks Clears bare natural spruce tips up to 4.5mm thick Does not fit 1/4" wood dowel branches on artificial trees Overall envelope is 65mm x 80mm. No supports required.
70mm Santa Face Ornament
A single-piece stylized Santa Claus face ornament, designed to lay flat on the print bed. The model uses raised geometric profiles for the moustache, nose, and hat brim, alongside through-cut eyes and mouth for visual contrast without requiring painted textures. Specifications Dimensions: 70 mm wide, 75 mm tall, 3.5 mm overall thickness. Structural Base: 2.5 mm solid backing layer. Hanging Interface: 5 mm circular bore located in the top pom-pom. Print Settings: Prints flat without supports. A filament swap at Z=2.6 mm allows the raised accents to be printed in an alternate color.
Stylized Snowflake Bell Ornament
A solid, flat-backed Christmas bell ornament designed for straightforward FDM printing. The model combines a traditional flared silhouette with a top bow and an integrated hanging ring. Dimensions: 60 mm wide, 70 mm tall, 3.5 mm total thickness. Structural Base: 2.5 mm thick plate to ensure durability. Surface Details: A raised 1.5 mm border, a central geometric snowflake pattern, and layered bow geometry elevated to the full 3.5 mm height. Mounting: Features a clean 5 mm diameter hole in the top ring for string or wire hangers. Prints completely flat on the bed with no supports required. Ideal for PLA or PETG.
Raised Star Ornament
A 70 mm five-pointed star ornament designed to print flat on the build plate. It features a smaller raised star and radiating decorative lines on the front face, adding visual interest while remaining easy to print without supports. 70 mm overall width 5 mm integrated hanging hole 2.2 mm base thickness with an additional 0.8 mm raised pattern Flat back for bed adhesion