SUPPORT PRINTYTRON
New Model
Loading 3D preview…

Welcome — Cursive Neon Strip Holder

Created 26 days ago

Decor & Displayneon-signled-stripcursivewelcomesignno-supportsdecor
Remix this model →

Description

Welcome is a script-lettered sign form with an open channel running through every letter, built for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the flowing lettering glows like a custom neon sign.

Features

  • Heavy brush-style "Welcome" lettering
  • 1.6 mm walls around an open top channel
  • 2 mm floor, 10 mm overall height
  • Wire exit holes through the floor at the ends of the word

Print notes

  • Prints flat with no supports
  • Strip width varies by brand, so check the channel width against your strip first

Images

SUPPORT PRINTYTRON
Tip Jar
Printytron built this for free. If it saved you a trip to the shop, a tip helps keep it free.
Need filament at a great price?
Printing this one? Stock up through our eSun partner link — your price stays the same, but Printytron gets a small commission to go towards our costs.
Wall-Mounted Running Medal Holder

Wall-Mounted Running Medal Holder

What it's for A wall-mounted rack for displaying running medals. Each ribbon slides onto one of eleven angled prongs that project from a flat backboard, so medals hang in a neat row and stay visible instead of ending up in a drawer. The prongs tilt up and finish in a ball tip, which holds the strap in place once it is looped on. The backboard is left plain above the prongs, giving the row of medals a clean edge to hang against and keeping the silhouette simple to print. The front face is completely smooth — the hanging slots are cut only into the back, so no holes or screw heads show through the display side. Dimensions Backboard: 300 mm wide × 60 mm tall × 10 mm deep Medal prongs: 11 prongs at 25 mm spacing, each reaching 30 mm out from the backboard at a 15° upward tilt, with ball tips Hanging slots: two keyhole pockets cut 6 mm into the back, 200 mm apart, leaving 4 mm of solid material at the front Prong spacing is the number worth checking against your own medals — wide straps need more room between prongs, and the spacing can be opened up if yours run thick. Roughly 10 to 15 medals fit across the 300 mm board. Print notes Prints as one piece; no assembly required. Lay the backboard flat on the plate so the prongs build up in front of it. The tilt keeps them self-supporting, so no supports are needed. Because the slots are stopped short of the front, the screw heads sit recessed in the back rather than passing through the board. Two wall screws 200 mm apart carry the holder. Remix ideas Widen the backboard to 400 or 500 mm and add prongs for a larger collection. Add a second row of prongs below the first to stagger medals in two tiers. Add a raised name plate or a finish-line banner along the plain top edge using the same prong layout. Materials Rigid filament is the better choice here; the prongs carry real weight and a soft or flexible material will let them droop.

1 day agoRemix →
3W Letters on Australia Silhouette Stand

3W Letters on Australia Silhouette Stand

A raised "3W" monogram mounted upright on a stand cut to the silhouette of mainland Australia. Tasmania is gone: where the island used to sit, a short post now rises 18 mm from the base block and runs into the underside of the southeast corner. The map face is 10 mm thick and about 128 × 91 mm; the "3W" letters are roughly 68 × 29 mm and 8 mm deep, centred on the front face. Everything stands on a 112 × 30 mm base block, with five vertical posts — four 45 mm tall plus the 18 mm one at the southeast corner — bridging the gap from the base up into the underside of the map, so the silhouette rides above its foot instead of sitting flush on it. All five posts are now 6 mm wide and 8 mm deep, which is what stops the map feeling like it is floating on pins. Nothing is engraved — the coastline, the monogram and the open gap under the map carry the whole design. The coastline is drawn from about 60 points, so it is a simplified outline: the Gulf of Carpentaria and the southern gulfs are only roughly shaped. That is the first thing worth refining if a more faithful map is the goal. Remix hooks Coastline resolution is the main dial. The outline currently uses about 60 points. Doubling that sharpens the gulfs and the Cape York tip; halving it gives a chunkier, more graphic shape that prints faster and hides small printer artefacts. The support posts are the easiest structural change. Five posts, 6 × 8 mm in section, stand at x = -45, -20, 5 and 30 (45 mm tall) plus x = 43 (18 mm tall) across the 112 mm base. Add more for a wider map, slim them back toward 3 mm if you want a lighter frame, or angle them inward so they read as a bracket. Base size sets the stance. At 112 × 30 mm it is a plain rectangular foot; widen it for stability on a narrow shelf, narrow it for a lighter look, or reshape it into a second outline so the piece stands on a matching map fragment. Letter size is free. The "3W" group is about 68 × 29 × 8 mm, centred on the map face. Scale it up for a bolder centrepiece or down to let more of the coastline read around it. Thickness is a choice, not a constraint. 10 mm for the map and 8 mm for the letters gives a solid, weighty piece; dropping both to 4–5 mm flattens it, while going thicker turns it into a bookend-sized block. Bring the island back, or don't. A separate Tasmania is a small extra part that can be printed alongside or re-added as a second hanging element; leaving it off keeps the mainland edge clean and gives the southeast corner its post. Swap the monogram. The format is any short letter pair, initials or number-and-letter mark raised on a country or region outline, so the same layout works for other maps and other names. Starting values worth keeping in mind: 128 × 91 × 10 mm mainland map, 112 × 30 mm base block with four 45 mm posts and one 18 mm post, all 6 × 8 mm, and 68 × 29 × 8 mm letters.

2 days agoRemix →
Miniature Suitcase with Handle, Wheels and Weight Display

Miniature Suitcase with Handle, Wheels and Weight Display

What it's for A miniature suitcase standing upright on four sideways-mounted wheels, with a pull handle on top and a small thin scale plate set into the top face just in front of the handle. The plate carries a raised readout of 52 lbs, so the piece reads as a luggage scale at a glance. It works as a small desk ornament, a travel-themed display piece, or a scale prop for a dollhouse or diorama. The whole thing is one plain neutral finish, with no colour coding or recessed front screen. Dimensions Overall footprint: 60 × 24 × 100 mm (width × depth × height, as it sits on the print plate) Wheels: mounted sideways, axles running across the width of the case, so the body rests on them Weight plate: a small thin panel on the top face, in front of the handle Readout: raised 52 lbs lettering, picked as a believable airline-limit weight — say if you want a different figure Print notes The model prints as a single piece lying on its wheels, so no supports are needed under the body. The raised readout is small — a 0.4 mm nozzle with fine layer heights keeps the digits and the "lbs" legible, and a 0.25 mm nozzle gives crisper text. The thin top plate is shallow, so check that your bridging over that area is clean. Remix ideas Change the readout to a different weight, or leave the plate blank for a custom label. Swap the handle for a telescoping version, or add corner guards to the body. Scale the case up to hold small items, or down to keyring size. Finish A single neutral colour suits the plain, serious look — the design relies on shape and the raised text rather than colour contrast, so any filament works.

3 days agoRemix →