Description
Scale model of a wigwam-style domed hut on an 88 mm round base, with an arched front doorway, a top smoke hole, three binding bands and hay thatch strands angled down the dome.
Fit and dimensions
- Base disc: 88 mm diameter, 2 mm thick
- Dome: about 80 mm wide, roughly 32 mm tall overall
- Doorway faces -Y; thatch is left clear of it
Check before printing
- Hay strands are about 1 mm thick. Use a 0.4 mm nozzle and expect fine, fragile detail.
- Not a functional enclosure, and not scaled to fit any figure or miniature line.
Photos
Technical views
More like this
Explore more in Decor & Display →
Wickiup — Domed Hut Miniature
Wickiup is a small domed hut miniature inspired by the Apache wickiup shown in the linked reference image. A hollow dome with an arched doorway and a roof smoke hole, wrapped in raised bands that suggest woven thatch. Features Hollow dome, about 60 mm wide and 30 mm tall Arched doorway facing the front Smoke hole at the top Raised thatch bands in a second colour Print notes Flat base, so it prints without a raft Door arch is small; supports are rarely needed
Mandarin Town — Colorful Community Scene
A bright miniature town for learning Mandarin community vocabulary. Each building carries its name in Chinese, pinyin and English, and every main building has its own wall colour. Signs, a park, a pond, houses, cars and people fill out the scene. Features Hospital, library, community center, store and school, each in a different colour Park with pond, benches and trees, plus a banner reading 一起参加活动 Road with cars, footpaths, lamps and neighbourhood houses Work and Service signs with people at the buildings Dimensions 200 × 200 mm base plate, 4 mm thick
Mandarin Community Town Model
A tabletop town for practising Mandarin place words, where flat labels get lost. Each building, sign and park area carries its Chinese characters, pinyin and English on the front face, so the vocabulary sits right on the thing it names. Details that matter Base: 200 × 200 mm, 4 mm thick plate Buildings: hospital, library, community center, store and school, each 46 × 28 mm footprint Extras: park with pond, road, footpaths, houses, cars, trees, lamps and figures Colour regions: ground, road, walls, roofs, doors, lettering, signs, trees, lawn, pond, paths Print: large bed needed (or scale down); multicolour or paint by region; lettering is 0.8 mm raised, so use a 0.4 mm nozzle
Miniature Pop-Up Toaster, 70x46x45 mm
A small mechanical toaster printed as separate parts: body, toast carriage, two toast slices and a side lever. Pressing the lever handle down raises the carriage and pops both slices up out of the slots. No springs are used. Lowering the lever pulls the toast back down. How it works The lever pivots on a pin moulded into the right side wall. A peg on the lever passes through an arc slot in the wall into a horizontal slot in the carriage side plate. The peg's travel lifts the carriage about 14 mm. The ends of the arc slot are the up and down stops. Two floor blocks inside the body act as backup low stops. Each toast slice has a tenon that locates in a pocket on its carriage tray. Specs Body: 70 x 46 x 45 mm, open bottom. Print it upside down with the top plate on the bed. Overall assembled size: about 76 W x 52 D x 60 H mm with the toast raised. Carriage: 1 mm side clearance to the walls. Slice tenon clearance 0.3 mm per side. Slots: 27 x 7 mm for slices 25.5 x 5 mm. Print settings: PLA, 0.2 mm layers, 3 walls, 10-12% infill. No supports are needed. Estimated filament: roughly 35-45 g. This is below the 50-60 g target, so walls can be thickened if more weight is wanted. Assembly Slide the carriage into the body through the open bottom. Slice tenons face up. Press the lever hub onto the pivot pin, feeding the peg through the arc slot into the carriage slot. Add a dab of glue to the pin head if the snap fit is loose. Drop the slices into the slots.
Doll Wardrobe With Opening Doors
Doll wardrobe whose doors stay shut and never swing, because they are glued-on slabs. This one has two doors on pin hinges that actually open, with a centre divider and a hanging rail inside. Key numbers Overall size: 200 mm long x 50 mm deep x 200 mm high Walls and shelves: 6 mm; back panel 4 mm Doors: 4 mm thick, sit flush in the front opening with 0.6 mm clearance Hinge pins: 3 mm, in 3.8 mm sockets in the top and bottom panels Hanging rail: 5 mm round bar, 30 mm below the top Printing Print the body upright, open front facing you. Print the doors standing on their long edge, pins pointing up and down; pin ends need no supports. Drop each door's lower pin into its socket first, then tilt the top pin in. Rail and knobs are separate pieces to print and glue in place.
Christmas Tree Lantern for LED Tealight
A Christmas tree lantern that sits over a battery LED tealight, so the light stays hidden inside instead of glaring from a bare tealight on the table. The walls are perforated with rings of small round holes that throw dots of light, and the bottom is open so the LED can be placed or swapped without taking anything apart. Key numbers Height: about 135 mm including star Base diameter: 90 mm, open underneath (inner opening about 87 mm) Wall: 1.6 mm, three stacked tiers Perforations: 4.2 mm holes, staggered rings Star: separate colour, peg-mounted into the top tier Printing Print upright, open end down, no supports needed for the cone walls Green for the tree, gold or yellow for the star Use a 0.4 mm nozzle; a lighter or translucent filament glows more