Yard Safety Stop Sign
Created 2 months ago
Description
A classic octagonal stop sign design scaled down for domestic use. It features clean, legible warning text reading "STOP: CHECK FOR CHILDREN AND PETS" with a raised border.
What it's for
Perfect for driveway edges, garage doors, or backyard gates where a visible reminder is helpful.
Dimensions
- Sign Face: approx. 80mm wide and tall
- Total Depth: Base is 3mm thick, raised details add an extra 1.5mm
- Pole: 8mm outer diameter, attached below the sign and extending 60mm down
- Mounting Socket: 6mm hollow channel opening at the bottom of the pole, allowing it to easily slip over wire yard stakes or thin dowels
Assembly
This is split into logical parts for multi-color material printing or easy manual swaps. Bond the pole to the back recess with CA glue if modifying the layout, though it renders as a single unit.
Photos
Technical views
More like this
Explore more in Home & Fixtures →
Yard Game Clothespin Scoreboard
A lawn game scoreboard that uses standard clothespins on the outer edge, skipping complex slider mechanisms. Player one and two tracks run entirely opposite colours at every number, forcing high visual contrast across the gap. Print Envelope: Split exactly at the 10/11 mark into two 242 mm halves to clear standard 256 mm beds without resizing. Assembly: Halves join via a structural rear half-lap held by M3 or M4 bolts. Colors: Designed to run standard alternating black and white to keep counts legible from a distance.
PK360 Combustion Engine adapter
Allows connecting combustion engine grill fan to a pk360 grill intake vent
Pendant Ceiling Canopy
A clean, three-piece ceiling canopy designed to bridge a jagged hole and manage a pendant cable. The mechanism borrows from standard flat-pack fixture hardware: a central core hangs from the ceiling hook and threads through the main cover, while a hex nut clamps the cover tight against the drywall. The core is hollow to let your two-wire cable pass through cleanly, with side-exits at the top so the wiring doesn't foul the hanging eyelet. Features 105mm Canopy: Leaves a comfortable margin over an 80mm hole to hide chipped plaster. Hollow Core: 8mm internal channel easily clears standard twin-core lighting cable. Thread Clearance: The nut is cut with an oversized 16.8mm thread for a smooth, bind-free fit on standard FDM prints. Support-Free: All three pieces sit flat on the bed and require no supports to run.
Threaded Lamp Socket Cap
A threaded end cap designed to enclose the rear wiring of a light bulb socket. Features a 5mm cable pass-through hole and an internal thread sized with clearance for a 27.4mm socket back. Overall height: 22mm Wire pass-through: 5mm diameter Threading: 1.5mm pitch, cut with clearance for an easy fit Exterior: Plain cylinder with 1mm chamfered edges
Halo Drip Irrigation Ring
This is a low-profile, continuous-loop irrigation ring designed for automated watering systems. It distributes water evenly around the base of a plant without interfering with the stem. The structure is engineered specifically for FDM printing without supports. The internal hollow channel features a teardrop cross-section so the printer can bridge the ceiling cleanly, and the external hose barb includes a small, built-in support block connecting it to the build plate. Design Notes Dimensions: 197 mm outer diameter, 173 mm inner diameter, leaving a 12 mm wide profile. Inlet: Dual-barb fitting sized for 5 mm internal diameter tubing, pointing outward to keep the hose clear of the foliage. Distribution: 12 downward-facing 1 mm drip holes spaced every 30 degrees, beginning 15 degrees offset from the inlet to ensure the first drops don't pool at the connection. Mounting: Three low-profile tabs sit on the outer perimeter, drilled for standard wire pegs to anchor the ring into the soil.
4-Way Water Manifold
A compact, print-in-place water manifold built for automated plant irrigation systems. It splits a single main feed into four independent channels with smooth internal transitions to minimize flow restriction. Inlet: Single center-mounted fitting sized for 8mm ID hose. Outlets: Four equally-spaced fittings sized for 5mm ID hose. Barbs: Dual retaining ridges on all connections to prevent slip-offs under pressure. Internal Channels: Fully hollowed 7mm common chamber with spherical transitions to eliminate dead zones and sharp fluid corners.