Zero Talent Motivational Wall Plaque
Created today
Description
A minimalist, multi-color printable wall plaque featuring the popular motivational list "Ten Things That Require Zero Talent".
Designed strictly to the 180×240mm proportions requested, the plaque is split into distinct printable regions that allow for easy AMS filament mapping in standard slicers like Bambu Studio.
Printing Specifications
- Size: 180 mm × 240 mm × 3.6 mm
- Layout: Flat backing suitable for mounting tape.
- Colors: Separated into three distinct mesh regions: a mauve-gray top header block, a charcoal main block, and stark white raised text and dividers.
- Details: 0.6 mm raised elements optimized for standard 0.4 mm nozzles without needing fine-tuning or supports.
Photos
Technical views
More like this
Explore more in Decor & Display →
Givvy Display Logo
A thick, rounded "GIVVY" logo designed specifically for multi-color FDM printing (AMS/MMU). The text features a solid aqua centre surrounded by a continuous purple outline that merges the letters into a single, cohesive piece. Scaled perfectly for mounting onto a trading-card display stand. Dimensions: ~94 mm wide, ~31 mm high, and 3.2 mm thick. Format: Co-planar separate regions for the centre and outline, allowing easy assignment of different filaments in your slicer. Mounting: Perfectly flat back for flush gluing to display stands or frames.
5mm Bore Heart Ornament
A flat-backed ornamental plate. The critical interface here is the 5 mm through-hole at the top dead centre — check the gauge of your hanging hooks or ribbon before running the file. Overall Dimensions: 70 mm width, 70 mm height, 3.8 mm total thickness. Base Plate: 3.0 mm thick, solid manifold for FDM. Raised Pattern: 0.8 mm extrusion above the base surface. Bore: 5.0 mm diameter. Lays entirely flat on the bed. No supports required.
150mm Floral Calavera Lampshade
A wide cylindrical lampshade featuring a repeating cut-through motif of a traditional Mexican sugar skull adorned with floral eye sockets, forehead mandalas, and crowns. The base is engraved with "MEXICO LINDO" along the perimeter. Fit: 150 mm diameter, 180 mm tall. Mounting: 49 mm centered top hole for standard pendant fixtures. Open bottom. Printability: The engraved text at the base leaves a 0.7 mm inner shell, ensuring the centers of letters like 'O' and 'D' remain fully attached while passing light. The skull features are bridged and cut out as contiguous negative space with no floating islands. Walls: 2.2 mm thick, chamfered at the top and bottom edges for a finished look.
Cloud Security Padlock Desk Ornament
A cloud-shaped ornament with a padlock raised on the front, so the cloud-security symbol sits flat and upright instead of tipping over on a desk or shelf. The cloud has rounded puffs and a flat underside. The padlock is welded to the front face, so nothing floats or snaps off. The shackle is thick, and the keyhole is cut into the lock body. Cloud: about 100 mm wide, roughly 60 mm tall, 16 mm thick Padlock: 28 mm wide body, 5 mm thick shackle, raised about 7 mm off the cloud Print: flat bottom down, no supports needed, 0.2 mm layers, 3 or more perimeters Single colour, one solid body
witek1
A three-disk stacked cylinder, the standard database symbol, as a desk ornament or sign element. Disks are 50 mm across and 14 mm tall with 3 mm grooves, joined by a 42 mm core, and a thin cap sits on top. Remix hooks Disk count (n = 3): raise it for a taller stack, or drop to 2 for a compact version. Groove gap (3 mm): widen it for stronger shadow lines, or set it to 0 for a solid can. Diameter (50 mm) and disk height (14 mm): scale both for a keychain or a coaster-sized piece. Pairs with: a flat base plate with a label, or a magnet pocket in the bottom for a fridge version.
Sonderkerzen 1.0
Ein hohler, zylindrischer Kerzenkörper für den 3D-Druck, der eine brennende Kerze simuliert. Das Modell verfügt über realistische Wachstropfen an der Außenseite und einen unregelmäßig geschmolzenen oberen Rand, ohne die vorgegebenen technischen Maße zu beeinträchtigen. Dimensions Gesamthöhe: 120 mm Durchmesser: 43 mm (außen, exklusive Wachstropfen), 37 mm (innen) Bodenstärke: 3 mm Bohrungen: Vier 1-mm-Löcher auf Höhe Z=104 (16 mm unter dem Rand), kreuzförmig angeordnet Print notes Die Wachsstruktur ist so gestaltet, dass sie ohne Stützstrukturen (Supports) druckbar sein sollte. Die feinen 1-mm-Löcher erfordern einen gut kalibrierten Drucker und ggf. eine niedrige Schichthöhe, um nicht vom Slicer ignoriert zu werden.