19.5mm Desk Edge Puck Mount
Created today
Description
Edge-mounted charging cradle sized for the 33.5mm Google Pixel Watch magnetic puck. Designed to drop over a standard 3/4-inch (19.5mm) wood plank.
- Fitment: The 33.5mm bore sits at the rear of the housing. You push the puck in from the back, then slide the whole assembly over your desk edge — the wood itself traps the puck so it cannot back out.
- Cable Routing: An 8mm slot on the bottom allows the cable to drop cleanly out of the way.
- Incompatibilities: Does not fit full-sized phone Qi chargers or desks thicker than 19.5mm without adjustment. Phone hooks have been removed from this version.
Images
More like this
Explore more in Desk & Tech →
25mm Desk Edge Cable Clip
A rigid 4-slot cable clip profiled to seat directly onto a standard 25mm desk edge. The upper block features four 7mm circular channels to corral anything from USB cables to heavy power leads, utilizing a 5mm snap-in neck and flared entry lips to retain them once seated. Fitment Checklist Host Desk Thickness: 25.0mm exactly. The mounting bore incorporates dual 1mm tension bumps on the bottom face to grip the surface. Measure the board with calipers before printing; standard one-inch stock will seat tight, but the clip will not force over thicker material. Cable Capacity: Four 7mm bores. The 5mm entry neck requires slight cable jacket compression for insertion. Incompatibilities: Will not seat correctly on desks with deep edge bevels, metal trim bands, or severe rounded profiles.
Slotted Under-Desk Cable Tray
What it's for Designed to mount directly to the underside of a desk to hold a power strip and bundle loose cables, clearing floor hazards. The open U-channel features vertical slots along both long edges, allowing cables to drop in from above and providing anchor points for hook-and-loop straps to lash down the strip. Prints flat on its back without supports. Dimensions Overall footprint: 350 x 100 x 60 mm Inner channel capacity: 350 x 64 x 57 mm Cable slots: 8 mm wide, 45 mm deep, spaced at 35 mm intervals Mounting: 10 countersunk screw holes positioned along the outer flanges Remix ideas Adjust the overall length to match specific power strips or desk spans. Widen the side slots to accommodate heavy-gauge monitor cables or display connectors. Increase the wall thickness to support heavier power supplies and transformers.
MiniBus Elbilia
A highly stable, monolithic desktop phone stand built entirely for reliable FDM printing. It features a continuous heavy-base profile that resists tipping, an integrated 65-degree resting plane, and a deep front retaining lip. Remix & Mod Hooks Resting Angle: Currently cut precisely at 65 degrees; shifting the top control points can stand the phone up straight for video calls or lay it back for touch typing. Cable Routing: Features an invisible internal bend channel. The 18x15mm pass-through slot is sized for standard USB-C heads, but can easily be widened for thick multi-cables. Base Profile: Built as a single continuous 2D extrusion. Extending the base depth (Y axis) or adding weight-reduction cutouts are trivial modifications for someone looking to save filament or stretch the footprint.
Folding Flat-Pack Name Tag
A print-in-place desk plate that prints entirely flat and features an integrated hinged kickstand. Designed for easy setup, the outer frame swings backward to form a stable tripod base. Features of this design: Print-in-place captive hinge mechanism with a 0.4mm tolerance Heavyweight 4mm main card thickness for rigidity Recessed nested geometry allowing it to collapse back into a single flat sheet Embossed typography using Archivo Black for high legibility
Clip Câble 6mm Poney
Support de bureau pour retenir un cordon lorsqu'il n'est pas branché, intégré dans un gabarit de poney stylisé. Spécifications de montage Câble cible : Gaine de 5,5 à 6 mm de diamètre (type USB-C tressé, cordons de charge standards). Rétention : Fente supérieure pincée à 4,5 mm pour un encliquetage en force. Fixation : Base plate de 24 x 35 mm, conçue pour recevoir un carré d'adhésif double-face. Incompatibilités : Ne convient pas aux câbles d'alimentation épais, aux cordons HDMI, ni aux fils de souris ultra-fins (qui glisseront hors de la gorge).
Pebble Dock — EDC Organiser
Pebble Dock brings order to your nightstand with a heavy, stable, monolithic footprint. The phone sits securely against a rigid 38mm backrest angled at 70 degrees, with an 8mm front retaining lip and an integrated hidden cable channel for neat charging. Features Rigid Backrest: A deeply recessed pocket securely supports a cased smartphone. Hidden Cable Channel: Cables feed directly from beneath the phone to the rear of the body, keeping the surface clear. Essential Trays: A front catch-all for daily carries and a side pocket for earbuds. Support-free: The solid base and rounded profile print cleanly directly on the bed.