40mm Bore USB-C Keyhole Grommet
Created 1 months ago
Description
Mates with a 40mm circular bore in panels up to 10mm thick.
Designed for standard USB-C connectors. The geometry allows the connector head to pass entirely through the 16mm offset bore, after which the cable drops into the 6mm central parking hole. The 4.5mm throat prevents the connector from falling back through the panel.
Fitment notes
- Host: 40mm diameter circular hole.
- Panel thickness: Minimum 1.0mm, maximum 10.0mm.
- Clearance: The threaded shaft is cut to 39mm outer diameter to ensure bind-free insertion through the panel.
- Cable head: Clears connector housings up to 15.5mm wide.
Photos
Technical views
More like this
Explore more in Desk & Tech →
Slotted Under-Desk Cable Tray
What it's for Designed to mount directly to the underside of a desk to hold a power strip and bundle loose cables, clearing floor hazards. The open U-channel features vertical slots along both long edges, allowing cables to drop in from above and providing anchor points for hook-and-loop straps to lash down the strip. Prints flat on its back without supports. Dimensions Overall footprint: 350 x 100 x 60 mm Inner channel capacity: 350 x 64 x 57 mm Cable slots: 8 mm wide, 45 mm deep, spaced at 35 mm intervals Mounting: 10 countersunk screw holes positioned along the outer flanges Remix ideas Adjust the overall length to match specific power strips or desk spans. Widen the side slots to accommodate heavy-gauge monitor cables or display connectors. Increase the wall thickness to support heavier power supplies and transformers.
Clip Câble 6mm Poney
Support de bureau pour retenir un cordon lorsqu'il n'est pas branché, intégré dans un gabarit de poney stylisé. Spécifications de montage Câble cible : Gaine de 5,5 à 6 mm de diamètre (type USB-C tressé, cordons de charge standards). Rétention : Fente supérieure pincée à 4,5 mm pour un encliquetage en force. Fixation : Base plate de 24 x 35 mm, conçue pour recevoir un carré d'adhésif double-face. Incompatibilités : Ne convient pas aux câbles d'alimentation épais, aux cordons HDMI, ni aux fils de souris ultra-fins (qui glisseront hors de la gorge).
Pebble Dock — EDC Organiser
Pebble Dock brings order to your nightstand with a heavy, stable, monolithic footprint. The phone sits securely against a rigid 38mm backrest angled at 70 degrees, with an 8mm front retaining lip and an integrated hidden cable channel for neat charging. Features Rigid Backrest: A deeply recessed pocket securely supports a cased smartphone. Hidden Cable Channel: Cables feed directly from beneath the phone to the rear of the body, keeping the surface clear. Essential Trays: A front catch-all for daily carries and a side pocket for earbuds. Support-free: The solid base and rounded profile print cleanly directly on the bed.
25mm Desk Edge Cable Clip
A rigid 4-slot cable clip profiled to seat directly onto a standard 25mm desk edge. The upper block features four 7mm circular channels to corral anything from USB cables to heavy power leads, utilizing a 5mm snap-in neck and flared entry lips to retain them once seated. Fitment Checklist Host Desk Thickness: 25.0mm exactly. The mounting bore incorporates dual 1mm tension bumps on the bottom face to grip the surface. Measure the board with calipers before printing; standard one-inch stock will seat tight, but the clip will not force over thicker material. Cable Capacity: Four 7mm bores. The 5mm entry neck requires slight cable jacket compression for insertion. Incompatibilities: Will not seat correctly on desks with deep edge bevels, metal trim bands, or severe rounded profiles.
CareProof V1 Sensor Enclosure
A complete modular enclosure system designed to house the components of the CareProof V1 tracking and monitoring node. The main chassis splits into a generous front housing and an overlapping rear cover, securely fastened with M3 corner screws to provide easy access for wiring adjustments. Included Components Front Housing: 152 × 105 × 28 mm primary shell with dedicated cutouts for a status LED, vent slots, a 24 mm PIR sensor aperture, and an embossed tap zone. Rear Cover: Matching backplate with an 8 mm alignment lip and M3 screw interfaces. NFC Bracket: Removable 50 × 50 mm internal sled to hold a PN532 module directly against the front face. PIR Bracket: Basic 35 × 30 mm retention plate for the motion sensor. Door Sensor Unit: Separate two-piece 40 × 20 mm enclosure designed to hold a standard magnetic reed switch on the client's door.
Folding Flat-Pack Name Tag
A print-in-place desk plate that prints entirely flat and features an integrated hinged kickstand. Designed for easy setup, the outer frame swings backward to form a stable tripod base. Features of this design: Print-in-place captive hinge mechanism with a 0.4mm tolerance Heavyweight 4mm main card thickness for rigidity Recessed nested geometry allowing it to collapse back into a single flat sheet Embossed typography using Archivo Black for high legibility