50mm Strap Castleman Stroller Tag
Created 1 months ago
Remixed once
Description
A two-tone stroller tag built to ride on a standard 50mm webbing strap or carabiner. The mounting slot clears most heavy-duty hook-and-loop closures without binding.
- Mounting Bore: 50x6mm
- Dimensions: 110x65mm
- Profile: Flat multi-level face for easy two-color filament swaps.
Designed specifically for the Castleman family, carrying a classic '95' racing motif.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Raised Star Ornament
A 70 mm five-pointed star ornament designed to print flat on the build plate. It features a smaller raised star and radiating decorative lines on the front face, adding visual interest while remaining easy to print without supports. 70 mm overall width 5 mm integrated hanging hole 2.2 mm base thickness with an additional 0.8 mm raised pattern Flat back for bed adhesion
Haven Embossed Gift Tag
A simple, printable gift tag featuring embossed text and a raised border. Designed for clean dual-color printing using a simple filament swap at Z=2.0mm. Dimensions: 75mm x 35mm Attachment: 5mm hole located near the left edge Customization: The text and base plate thicknesses are separated to make manual pauses straightforward. Print Settings: No supports required. Print flat on the plate with the text facing up.
Snap-Fire — Auto Crossbow
A fully print-in-place auto-reloading mini crossbow. This model is scaled for standard 6mm airsoft BBs and features a gravity hopper that drops the next shot right onto the firing groove every time the string is drawn back. Features Auto-Reload Hopper: Stack 5-6 BBs vertically; pulling the string cycles the next shot. String Guide Tracks: Side rails capture the rubber band on release so it flies perfectly straight without jumping off the barrel. Print-in-Place Trigger: The trigger mechanism prints fully assembled with a built-in pivot pin. Just wiggle it free after printing. String a standard rubber band between the side notches on the front arms and feed it through the guide tracks to shoot.
70mm Santa Face Ornament
A single-piece stylized Santa Claus face ornament, designed to lay flat on the print bed. The model uses raised geometric profiles for the moustache, nose, and hat brim, alongside through-cut eyes and mouth for visual contrast without requiring painted textures. Specifications Dimensions: 70 mm wide, 75 mm tall, 3.5 mm overall thickness. Structural Base: 2.5 mm solid backing layer. Hanging Interface: 5 mm circular bore located in the top pom-pom. Print Settings: Prints flat without supports. A filament swap at Z=2.6 mm allows the raised accents to be printed in an alternate color.
Stylized Snowflake Bell Ornament
A solid, flat-backed Christmas bell ornament designed for straightforward FDM printing. The model combines a traditional flared silhouette with a top bow and an integrated hanging ring. Dimensions: 60 mm wide, 70 mm tall, 3.5 mm total thickness. Structural Base: 2.5 mm thick plate to ensure durability. Surface Details: A raised 1.5 mm border, a central geometric snowflake pattern, and layered bow geometry elevated to the full 3.5 mm height. Mounting: Features a clean 5 mm diameter hole in the top ring for string or wire hangers. Prints completely flat on the bed with no supports required. Ideal for PLA or PETG.
80 Cake Topper With Spikes
A solid replacement for wax candles that inevitably melt over the cake or get knocked over. Features an integrated base bar to keep the digits aligned, deep sturdy stakes to anchor it into the frosting, and flat decorative flames printed right into the design. Print details Dimensions: 6 mm thick, ensuring it's rigid enough not to flex when pushed in. Printability: Prints entirely flat on its back (the -Y face) without any supports. Parts: Single multi-colored print if supported, or prints as a single block in one color.