60mm Keyring Carabiner Clip
Created today
Description
A 60x30mm print-in-place compliant carabiner designed to interface with standard split-ring keychains and lightweight everyday carry items. The frame features a 5mm constant cross-section with alternating triangular truss cuts along the spine to reduce material weight without compromising the hinge action.
Fitment and Tolerances
- Clearance: The interlocking latch mechanism relies on a 0.4mm printed gap. Ensure flow rate and horizontal expansion are calibrated to prevent the gate from fusing to the catch.
- Hardware: Accepts standard flat or wire keyrings up to 4mm in thickness through the inner loop.
- Incompatibilities: This is a decorative thermoplastic clip for keys and pocket tools. It is strictly non-load-bearing. Do not use for climbing, rigging, securing heavy equipment, or any life-safety applications.
Images
More like this
Explore more in Keychains & EDC →
FlexiLink — Llavero Articulado TAMARA
Este es un llavero articulado de impresión print-in-place que no requiere soportes ni montaje. Las letras conforman el cuerpo de los propios eslabones, y se unen mediante un sistema de pasador cautivo oculto con holguras diseñadas para liberar el movimiento tan pronto como la pieza termina de imprimirse. Características Legibilidad mejorada: Los pasadores se conectan directamente a los laterales de las letras, manteniendo el interior limpio. Articulaciones sueltas: Diseñadas con 0.4 mm de tolerancia, pensadas para la calibración habitual de PLA en impresoras modernas. Sin ensamblaje: Todo el llavero se imprime como un solo cuerpo que se pliega. Anilla integrada: El extremo cuenta con una gaza con espacio para una anilla estándar de llaves.
Chubby Sitting Hamster Keychain
A compact, sitting hamster figure modelled with exaggerated, rounded proportions for a chunky silhouette. The base is sheared flat to allow support-free printing directly on the build plate, and a reinforced loop is integrated into the upper back of the head. Dimensions: ~28mm wide, 30mm tall. Keyring Loop: 3.2mm horizontal bore, heavily chamfered outer ring. Print Settings: Print upright. The limbs and facial features intersect closely with the main body to minimise overhangs; no supports are required.
Fluier Cochilie Spiralată
Un fluier cu siluetă de cochilie de mare: camera rotundă poartă o nervură în spirală, iar muștiucul scurt iese în față ca un cioc. Aerul trece printr-un canal îngust, lovește muchia ascuțită din fereastră și face camera să sune. Cameră de rezonanță cilindrică, închisă Inel pentru breloc în spate Nervura spiralată se poate imprima într-o altă culoare Se printează culcat, fără suporturi; stratul de 0,2 mm dă un sunet curat
Fidget
What it's for A fully print-in-place fidget roller inspired by continuous-motion hand toys. It features two heavily grooved outer cylinders captured on a rigid internal frame. Built to be rolled continuously in one hand to keep fingers busy. Dimensions Overall size: 37 mm wide, 63 mm tall, 22 mm deep. Rollers: 22 mm diameter, 50 mm tall with 20 scalloped grip grooves. Clearance: Designed with a 0.5 mm gap top, bottom, and radially around the axles for a free spin immediately off the build plate. Print notes Prints completely vertically without supports. The top frame link is designed with a flat bottom to bridge cleanly across the two internal axles without adhering to the rollers beneath it. Once finished, a firm twist breaks any minor stringing and frees the rollers.
4mm Bore Keychain Table
A miniature four-legged table scaled down for pocket carry. It features a standard rectangular top and four corner legs, with an integrated mounting tab extending from the short edge. Fitment and Dimensions Keyring Bore: 4mm diameter hole, fits standard split rings and mini carabiners. Overall Size: 43mm long (including the tab), 25mm wide, and 18mm tall. Clearance: Prints as a single solid piece; no assembly required.
Print-in-Place Tri-Wheel Fidget
What it's for A captive, fully print-in-place mechanical fidget toy. It features three deep-treaded thumb wheels trapped within rounded U-brackets at the corners, plus a central rotating hub. The entire assembly drops onto the build plate as a single unit and breaks free immediately after printing. Dimensions Overall footprint: ~88 mm point-to-point. Thickness: 16 mm frame (top hub cap sits 1.5 mm higher). Clearance: 0.4 mm gap around all moving parts. Print notes Designed for PLA with no supports. Elephant-foot compensation chamfers are built directly into the bottom faces of the captive axles and the center hub hole, ensuring the mechanisms won't fuse to the build plate on the first layer.