AeroSpan — Sliding Window AC Seal
Created 1 months ago
Remixed once
Description
Built for horizontal sliding windows, this adjustable dual-plate system fills the open sash gap without permanent modifications, making it ideal for rentals. It features a precise 130mm port for portable air conditioner hoses and includes a twist-lock bayonet cap to completely seal off drafts when the cooling unit is disconnected.
Features
- Adjustable Span: The sliding track design expands the working width from 340mm up to 500mm to accommodate varying window openings.
- Rental Friendly: Clamps securely using standard hardware rather than relying on window pressure or requiring drilled fixtures.
- Twist-Lock Cap: A secure three-lug bayonet mechanism blanks off the 130mm port for times when the hose is removed.
Assembly Notes
The sliding extension requires four standard M6 bolts and nuts (not included in the printed file) to clamp the overlapping plates once the desired width is set.
Images
More like this
Explore more in Home & Fixtures →
Silicone Sealing Washer
This is a flexible sealing washer designed to fit between a tap adapter and a tap connection. It provides a watertight seal when compressed. Dimensions Outer Diameter: 28 mm Inner Diameter: 20 mm Thickness: 3 mm Material Notes While modeled here as a solid, the physical part should be printed in a flexible filament like TPU, or cast in silicone, to function as a proper seal.
Wall-Mounted Bedside Floating Shelf
What it's for A sleek floating shelf for beside the bed at about head height, sized for an ornament or a small potted plant. A back plate with four countersunk screw holes fixes it to the wall, and two triangular brackets support the top. The design is symmetrical, so printing two gives a matching pair for each side of the bed. Dimensions Shelf top: 200 × 120 × 12 mm, rounded edges Back plate: 170 mm wide, 6 mm thick, 70 mm tall including the shelf Screw holes: four, 4.5 mm shank with 9 mm countersink, set 80 mm apart, the upper pair just below the shelf Brackets: two, 6 mm thick, at X ±70 mm Print notes Prints with the top face on the bed, with no supports needed. Use wall plugs suited to your wall type and countersunk screws with heads up to 9 mm. Remix ideas Narrow the shelf for tighter spaces. Add a small front lip to keep ornaments from sliding off. Add a cable notch for a bedside lamp.
Straight Cylindrical Pipe
A straight cylindrical pipe with a uniform wall thickness, designed for fluid transfer, structure, or sleeving. Inner Diameter: 60 mm Outer Diameter: 64 mm Wall Thickness: 2 mm Overall Length: 60 mm
Botanical Propagation Tray
A shallow, rectangular nursery tray built specifically for sowing seeds and propagating small cuttings. It is elevated on four short feet to allow excess water to escape underneath, preventing root rot. Design Features Drainage Grid: A regular pattern of 3.5mm holes across the bottom ensures proper water flow. Elevated Base: 5mm feet keep the tray off flat surfaces, allowing air circulation and drainage. Sturdy Walls: 2mm thick perimeter walls provide enough rigidity to move the tray when fully loaded with damp soil.
125mm 8-Rib Filter Wrench
Two-piece water filter wrench sized for 125mm (4.5-inch) housings, featuring an 8-rib engagement ring. Joint: Heavy Z-axis sliding dovetail Fit: 125mm inner diameter with 8 notches Print Volume: Parts separated to fit 180x180mm print beds
Fenstergriff-Halter Block 110x20x30 mm
Block mit 110 x 20 x 30 mm und zwei Aussparungen an der Unterseite zum Einhaken in Fenstergriffe. Die Aussparungen haben unten gerade Wände und oben eine runde Form (Ø25 mm). Die Öffnung ist mit 21 mm etwas schmaler als der Griff, damit dieser einrastet. Maße: 110 x 20 x 30 mm, Kanten 1,5 mm angefast Aussparungen: Ø25 mm rund oben, 21 mm breite gerade Öffnung unten Mittenabstand: 70 mm Durchgehend durch die 20 mm Breite Material: PLA oder PETG, ohne Stützen druckbar