Description
A 23 mm bore ring with a small open square loop fused to one side. Both are 10 mm tall with 5 mm walls, printed as a single piece.
Remix hooks
- Square opening (
sq_open, currently 5 mm): the outer square follows it at opening + 2 × wall, so 15 mm now. - Square wall (
sq_wall, 5 mm): thin it for a lighter loop, or thicken it for a stronger lug. - Overlap into the ring (2 mm): raise it for a stronger join, lower it for a more distinct loop.
- Ring bore (23 mm) and ring wall (5 mm, giving a 33 mm outer diameter): treat 23 mm as the outer diameter instead by changing the bore.
- Height (10 mm): shared by both features.
Pairs well with a cord, a small pin or a strap threaded through the square, with the ring worn or mounted on a rod.
Images
More like this
Explore more in Keychains & EDC →
Mini Bubble Cross-Stitch Pendant
A miniature cross-stitch frame with a solid tray bottom, designed for a removable 26x26mm stitched canvas insert. The outer border features a scalloped bubble texture for a softer, decorative look. 11x11 grid: Precision-spaced 1.1mm holes on the insert piece for cross-stitching. Tray design: Solid back hides the rear of the stitch work. Bubble border: Raised spherical detailing around the entire front edge. Pendant loop: Integrated top loop (2.5mm hole) for attaching a cord or ring.
Sleutelhanger Elisabeth, Courgette, 62 mm
Sleutelhanger met de naam "Elisabeth" in Courgette-letters, bedoeld voor een standaard sleutelring. Eén stuk, in één kleur te printen. Voor het printen controleren Breedte van de naam: 62 mm, plus de rand ongeveer 70 mm. Gat in het oogje: 4,5 mm, geschikt voor een gewone sleutelring. Een dikkere ring past niet. Dikte: 2 mm ondergrond, letters 3,2 mm hoog. Past niet bij Karabijnhaken met een dikke ogen of brede band. Het gat is te klein.
Visitor Pass Base Frame
A solid, minimal frame designed to house a standard 3D-printed visitor pass insert. The base acts as a rigid backing plate, featuring a recessed cavity with a slight continuous inner overhang. This tapered lip allows a flat insert to snap securely into place while printing entirely without supports. Overall Dimensions: 120 mm × 75 mm. Thickness: 2 mm solid floor with a 1.8 mm raised border (3.8 mm total height). Recess Size: 110 mm × 65 mm, providing roughly 0.2 mm clearance around a 109.6 mm × 64.6 mm insert. Retention: 0.2 mm continuous 45-degree internal chamfer at the top edge to lock the insert in place. Printability: Prints perfectly flat on the bed; no supports required.
Support-Free Braided Crucifix Pendant
Pendants that look good from the front usually refuse to sit flat on a print bed, leaving you picking stringy supports out of fine details for half an hour. This cross solves that by keeping a meticulously carved face and an intertwined braided rope lashing, while silently shaving the entire rear face perfectly flush. It drops right onto the build plate and prints in one clean shot. Dimensions: 34 mm wide, 55 mm tall Mounting: Heavy-duty 3.5 mm integrated through-bore, practically un-snappable Printability: Zero supports needed. The back is sliced flat so it anchors perfectly to the bed.
FlexiLink — Llavero Articulado TAMARA
Este es un llavero articulado de impresión print-in-place que no requiere soportes ni montaje. Las letras conforman el cuerpo de los propios eslabones, y se unen mediante un sistema de pasador cautivo oculto con holguras diseñadas para liberar el movimiento tan pronto como la pieza termina de imprimirse. Características Legibilidad mejorada: Los pasadores se conectan directamente a los laterales de las letras, manteniendo el interior limpio. Articulaciones sueltas: Diseñadas con 0.4 mm de tolerancia, pensadas para la calibración habitual de PLA en impresoras modernas. Sin ensamblaje: Todo el llavero se imprime como un solo cuerpo que se pliega. Anilla integrada: El extremo cuenta con una gaza con espacio para una anilla estándar de llaves.
Chubby Sitting Hamster Keychain
A compact, sitting hamster figure modelled with exaggerated, rounded proportions for a chunky silhouette. The base is sheared flat to allow support-free printing directly on the build plate, and a reinforced loop is integrated into the upper back of the head. Dimensions: ~28mm wide, 30mm tall. Keyring Loop: 3.2mm horizontal bore, heavily chamfered outer ring. Print Settings: Print upright. The limbs and facial features intersect closely with the main body to minimise overhangs; no supports are required.