Bharat Key — Mini Number Plate Keychain
Created today
Description
Bharat Key is a miniature Indian-style number plate keychain made to carry the exact registration PB 12 AL 2938. The long, slim plate uses a light grey/white base, a thin raised black border, and bold black lettering raised on one horizontal line. The single keyring hole sits at the extreme left with a raised ring around it for strength, while the registration stays centred in the remaining space. No blue IND strip, flag, extra colour or decoration is present, so the tag keeps a clean plate look while staying sturdy enough for a keyring.
Dimensions
- Plate: 75 × 20 × 2.5 mm
- Raised border and text: 0.6 mm above the base; border 1 mm wide
- Keyring hole: 4 mm diameter, cut fully through at the extreme left
- Hole ring: raised black ring around the hole for extra strength
Features
- Exact registration text: PB 12 AL 2938 on one horizontal line
- Bold black lettering raised above a light grey/white base
- Thin raised black border around the whole plate
- One circular keyring hole at the extreme left, fully through the plate
- Raised black ring around the hole to reinforce the keyring area
- Flat rectangular body with slightly rounded corners and a smooth flat backside
- Light grey/white base and black details only — no blue, no flag, no logos or decorations
Print notes
- Print flat on the back; no supports are needed.
- The raised border and lettering sit 0.6 mm above the base and read clearly at miniature scale.
- Keep the 4 mm hole clear so the plate hangs cleanly on a keyring.
Images
More like this
Explore more in Keychains & EDC →
Indian Number Plate Keychain HR82 6791
A rectangular Indian-style number plate keychain with the registration HR82 6791 in raised black letters on a white plate. 70 × 20 mm plate, 3 mm thick, with rounded corners Text raised 0.75 mm for clean printing with a 0.4 mm nozzle 4 mm ring hole on the left side Flat back, no supports needed Single connected piece, white base with black text
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.
Mini Bubble Cross-Stitch Pendant
A miniature cross-stitch frame with a solid tray bottom, designed for a removable 26x26mm stitched canvas insert. The outer border features a scalloped bubble texture for a softer, decorative look. 11x11 grid: Precision-spaced 1.1mm holes on the insert piece for cross-stitching. Tray design: Solid back hides the rear of the stitch work. Bubble border: Raised spherical detailing around the entire front edge. Pendant loop: Integrated top loop (2.5mm hole) for attaching a cord or ring.
Portachiavi 30x45x4 mm con battistrada
Portachiavi rettangolare 30x45 mm, spessore 4 mm, con cavità interna chiusa e disegno di battistrada inciso sulla faccia superiore. Misure da controllare Cavità interna: disco Ø26 x 1 mm, a metà spessore (da 1,5 a 2,5 mm), con pareti da 2 mm ai lati e 1,5 mm sopra e sotto. Non è visibile dall'esterno. Foro passante: Ø3 mm, a 3,5 mm dal bordo corto. Battistrada: tacchetti a V e scanalature laterali, profondità 0,6 mm. Compatibilità Il vano è pensato per un inserto piatto fino a Ø25 x 0,8 mm (moneta sottile, rondella, disco magnetico), da inserire con una pausa di stampa al layer 1,5 mm. Non adatto a inserti più spessi di 1 mm. Stampa senza supporti, con la faccia battistrada verso l'alto.
6 mm Ball-Joint Crystal Dragon, 42 Segments
A print-in-place articulated dragon built on 6 mm balls in 7 mm sockets, with faceted hexagonal crystal clusters on the head, spine, legs and tail tip. Fit and clearance Joint: 6 mm ball in a 7 mm socket (0.5 mm radial clearance), 5 mm neck opening so the ball cannot pull out. Chain: 42 body segments at 12 mm pitch, plus four legs of two segments each. Check before printing: the laid-out dragon is roughly 350 mm long in its S-curve, so verify your bed size or scale it down in the slicer. Scaling below about 80% closes the 0.5 mm clearance. Not suited to Printers with a bed under about 250 mm without rescaling. Printing the crystals first: the model lies flat on the bed, crystals pointing up, flat horns on the bed. Fast, uncooled printing: joint gaps need slow, well-cooled layers.
Pion Trivial Pursuit 26 mm, 6 camemberts
Support de pion rond de 26 mm de diamètre avec 6 logements en secteur, accompagné de 6 camemberts (secteurs de 60°) à insérer dans les logements. Les pièces s'impriment séparément, à plat. Support : diamètre 26 mm, hauteur 6 mm, fond 2 mm, logements de 4 mm de profondeur Cloisons entre logements : 1,2 mm Camemberts : 6 pièces, hauteur 3,5 mm, avec un plot de préhension de 1,5 mm Jeu d'insertion : 0,25 mm par côté Matériau conseillé : PLA ou PETG, une couleur par camembert