Car Coffee Tray shj
Created today
Description
A rectangular car coffee tray, 124.7 × 107.4 mm and 10 mm tall, with a raised 4 mm rim and a recessed floor to keep cups and items in place. "meet me in SHJ" is engraved 0.8 mm deep into the floor in the bottom-right corner.
Remix hooks
- Text weight: the letters are 7 mm tall with strokes thickened by 0.3 mm per side. Raise that for a bolder engraving, or drop it to return to the plain font weight.
- Text size and position: 7 mm size, 5 mm in from the rim. Change the inset to move it, or switch the alignment to centre it.
- Rim and floor: 4 mm wall and 4 mm floor thickness. A taller rim holds more, a thinner floor saves filament.
- Pairs with: a non-slip mat under the base, or a cup-sized ring added to the floor.
Images
More like this
Explore more in Automotive, RC & Hobby →
Ajman car tray
A rectangular coffee tray for the car, measuring 124.7 mm wide by 107.4 mm deep, with a raised rim and a recessed inner surface that keeps cups and items in place. "Meet me in Ajman" is engraved into the inner floor, centered. 124.7 × 107.4 mm footprint, 10 mm tall 4 mm raised walls with rounded corners Recessed floor, 6 mm below the rim Text engraved 1 mm deep, not raised Flat bottom, single solid piece, no supports needed
RC Car Bevel Gear Rear Drive
A rear-axle drive for an RC car where the motor shaft has to turn 90° into a cross-car axle without the gears skipping or the motor shifting. This set uses a 12-tooth pinion and 24-tooth crown gear (2:1) on a 103.9 mm × 6 mm axle, with an open motor cradle instead of a closed box. Key numbers Gears: module 1.5, 20° pressure angle, 4 mm face width, 90° shaft angle Pitch cone angles: 26.57° (pinion) and 63.43° (crown); cone distance about 20.1 mm Pinion bore 2.1 mm, crown bore 6.2 mm, both with M3 set-screw holes in the hubs Axle supports: 6.4 mm through-hole plus a 17.3 mm seat for 606 bearings (6×17×6) Base: 84 × 92 × 5 mm, M3 holes (3.4 mm clearance); cradle slots allow forward and back adjustment Motor cradle parameters at the top of the file: mw, mh, wall, saddlel, saddley. Measure the real motor and edit them Cover is open at the bottom, with two M3 ears at the rear Printing Print gears with the hub facing up or down on the bed; PETG or nylon preferred Cover prints open-side up without supports Axle is a separate 6 mm steel rod; M3 screws hold supports, cradle, straps and cover
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
Double Seatbelt Buckle Holder, Backseat
Two seatbelt buckles flop around and fall into the seat gap, so this holder stands both upright side by side in the backseat of a Toyota Sienta. Each 33 x 53 mm pocket goes straight through the base, so the buckle and webbing pass through with nothing blocking the bottom. Pocket size: 33 x 53 mm each, sized for a 31 x 51 mm buckle Sleeve height: 28 mm above a 6 mm base Overall footprint: 130 x 64 mm Centre screw hole: 4.5 mm Print flat on the base, no supports needed
Miniature Tractor Tire With Separate Rim
A miniature tractor front tire that stops the usual toy-wheel problem: thin tread that wears flat and a rim glued in place. This one has deep chevron lugs and a separate rim that presses in. Tire: 70 mm outer diameter, 40 mm wide, 44 mm bore, 14 zigzag lug pairs about 6 mm tall Rim: 43.6 mm barrel, 50 mm flange on one side, 10 mm axle hole Print: tire and rim as separate parts, flat on the bed, no supports needed for the rim; tire lugs print without supports Rim fits with 0.2 mm radial clearance
Aura — Automotive Ring Emblem
Llavero personalizado con el nombre "NOAH" en letras mayúsculas e inclinadas, diseñado con la temática de su personaje favorito. Cuenta con la silueta clásica asomándose por el anillo dorado, perfecto para colgar en la mochila o en las llaves. Características Diseño dinámico: Letras gruesas e inclinadas para dar sensación de velocidad. Impresión a dos colores: El diseño está dividido en dos alturas distintas. Cambia el filamento a los 3 mm para que el texto y el relieve resalten sobre el fondo. Resistente: Base sólida de 3 mm de grosor que aguanta los tirones del uso diario.