Chubby Sitting Hamster Keychain
Created today
Description
A compact, sitting hamster figure modelled with exaggerated, rounded proportions for a chunky silhouette. The base is sheared flat to allow support-free printing directly on the build plate, and a reinforced loop is integrated into the upper back of the head.
- Dimensions: ~28mm wide, 30mm tall.
- Keyring Loop: 3.2mm horizontal bore, heavily chamfered outer ring.
- Print Settings: Print upright. The limbs and facial features intersect closely with the main body to minimise overhangs; no supports are required.
Images
More like this
Explore more in Keychains & EDC →
Minimalist Concert Ola Keychain
A sleek, minimalist keychain bearing the word "ola" in the Concert One font. The lowercase letters are gently thickened to form a continuous, sturdy body, finishing in a small heart on the right side. Design Features Integrated Keyring Tab: A reinforced loop in the top-left corner is ready for standard split rings. Continuous Body: Offset text creates a solid, unified piece that prints securely and cleanly. Friendly Silhouette: The Concert One typeface combined with a minimal heart provides a smooth, tactile feel.
Fluier Cochilie Spiralată
Un fluier cu siluetă de cochilie de mare: camera rotundă poartă o nervură în spirală, iar muștiucul scurt iese în față ca un cioc. Aerul trece printr-un canal îngust, lovește muchia ascuțită din fereastră și face camera să sune. Cameră de rezonanță cilindrică, închisă Inel pentru breloc în spate Nervura spiralată se poate imprima într-o altă culoare Se printează culcat, fără suporturi; stratul de 0,2 mm dă un sunet curat
Fidget
What it's for A fully print-in-place fidget roller inspired by continuous-motion hand toys. It features two heavily grooved outer cylinders captured on a rigid internal frame. Built to be rolled continuously in one hand to keep fingers busy. Dimensions Overall size: 37 mm wide, 63 mm tall, 22 mm deep. Rollers: 22 mm diameter, 50 mm tall with 20 scalloped grip grooves. Clearance: Designed with a 0.5 mm gap top, bottom, and radially around the axles for a free spin immediately off the build plate. Print notes Prints completely vertically without supports. The top frame link is designed with a flat bottom to bridge cleanly across the two internal axles without adhering to the rollers beneath it. Once finished, a firm twist breaks any minor stringing and frees the rollers.
Sifflet Tactique Double Chambre
Un sifflet de survie compact et puissant, construit autour d’une architecture à double chambre. Imprimable sans aucun support, il utilise deux cavités de résonance de longueurs différentes pour générer une dissonance acoustique perçante. Pour les remixeurs Ce design est purement mathématique et conçu pour être ajusté : Pitch et Dissonance : La longueur des chambres (actuellement 41 mm et 47 mm) dicte la fréquence. Raccourcissez-les pour un son plus aigu. Coupe du sifflet (Fipple) : L'angle de la rampe est fixé à -18 degrés et le bord d'attaque divise le flux d'air à Z=11.0. Si votre imprimante a tendance à sur-extruder, ajustez la hauteur de la fenêtre de frappe pour garantir que l'air ne soit pas étouffé. Grips : Les rainures latérales et supérieures sont de simples soustractions itératives, faciles à remplacer par des logos ou du texte plat.
Pocket Multi-Fidget Block
What it's for A dense, multi-function pocket fidget block that packs six tactile mechanisms into a single footprint. Designed to be printed entirely flat without supports, it features a print-in-place captive joystick, a spinning side-wheel, and two cantilevered clicky buttons. The front edge houses a deep hidden storage slot containing a flat-packed basketball kit. The backboard (complete with a rubber band hook on the rear) slots into the top of the block, and the rim snaps firmly into the backboard. Finally, one quadrant contains an internal hollow tank cavity with a threaded fill plug and a side spout. The top wall of the tank is intentionally thin (0.8mm) with a tactile button pad—pressing it lightly flexes the roof, simulating a squirt-pump mechanism. (While functional in TPU, printing in PLA serves as a satisfying, slightly yielding fidget button). Dimensions Base Block: 60 × 60 × 18 mm. Storage Slot: 46 mm wide, 58 mm deep, 4.5 mm tall. Backboard: 30 × 25 mm (excluding base peg). Rim: 18 mm outer diameter. Assembly Print Settings: No supports required. Ensure your printer is dialed in for 0.4mm print-in-place tolerances so the joystick and spinner break free smoothly. Hoop: Slide the backboard out of the front slot, insert the peg into the slot on the top deck, and press the rim peg into the backboard hole. Tank: The included friction plug seals the top fill hole.
Bouquet Initial Keychain
What it's for A personal keychain built with raised script initials framed by an asymmetrical floral arrangement. The flowers cluster heavily at the base and taper up the sides in a crescent bouquet, leaving the top mount area clean and open. Dimensions Base diameter: 44 mm Plate thickness: 2.5 mm Relief depth: Initials and flowers stand 1–1.5 mm proud of the base Print notes Standard 0.2 mm layers work well; no supports required. The raised elements are flat-topped to make an intentional filament swap cleanly separate the base colour from the text and flowers.