Volumetric Hot Air Balloon Topper
Created 5 days ago
Description
A fully three-dimensional hot air balloon cake topper, taking the silhouette of the cutter and lofting it into a solid centerpiece. The balloon features raised structural ribs along the canopy, sitting above a hollow basket connected by thick rigging lines.
- Canopy: 70mm diameter sphere, tapered at the base.
- Mounting: 60mm spike designed to press securely into a cake.
- Print Notes: This is a fully volumetric model. Depending on your setup, it may require supports under the balloon overhang, or you might prefer splitting it down the middle in your slicer to print in two flat halves.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Casa tercer cerdito - Topper
Un topper de la casa del tercer chanchito del cuento de los tres cerditos y el lobo
Cake Topper: 120mm Width
Topper de torta de dos niveles con el nombre "María Sol", diseñado con la tipografía Damion. Texto principal: 4 mm de espesor total (2 mm de base + 2 mm de relieve). Soporte: Contorno engrosado de 2.5 mm para unir las letras y asegurar la rigidez estructural. Estacas: Doble estaca de 80 mm de largo y 5 mm de ancho para estabilizar el diseño en la torta.
Ancient Duelist: Free Bounce
A 3D-printable proxy dueling card for house games. This layout trades out standard monsters for a red cup bounce shot, leaving the description box filled with scaled-up, illegible hieroglyphs. Card Details Title: Free Bounce Art: Single bounce path into a table cup Text: Ancient mystery symbols (house rules apply) Printing: Raised features across a multi-depth plate, perfect for color swaps on the top layers.
Wide Brim Elliptical Hat
Here's a baseline wide-brimmed hat shell, anchored around the 170x200mm elliptical clearance requested. It is built flat to maximize bed adhesion for large-format printers, treating the build plate as the brim's reference plane. The dome is a simple half-ellipsoid that covers the core geometry, leaving plenty of room for modifications. Remix Hooks Crown Height: Set to a default 100mm. Scale the Z-axis of the crown geometry if you need a taller top hat or a shallower boater profile. Brim Contour: It is completely flat right now to survive the first layer on a 400x400mm bed. You could run a slight Z-warp over the outer 50mm to give it a swoop, though that will require supports. Material: At 2.4mm thick, this is dimensioned for standard rigid filaments (PETG/PLA) to hold its shape. Dialing the thickness down to 1.2mm for TPU would give the brim some authentic flop.
50mm Strap Castleman Stroller Tag
A two-tone stroller tag built to ride on a standard 50mm webbing strap or carabiner. The mounting slot clears most heavy-duty hook-and-loop closures without binding. Mounting Bore: 50x6mm Dimensions: 110x65mm Profile: Flat multi-level face for easy two-color filament swaps. Designed specifically for the Castleman family, carrying a classic '95' racing motif.
Smooth Swept-Wing Flexi Butterfly
A robust print-in-place flexi butterfly with perfectly sweeping, organic wing shapes. I stripped out the old jagged polygon boundaries and replaced them with tangent arcs—giving the wings a true biological sweep while keeping the hinge exactly where it needs to be. The antennae are anchored deep into the head block, so they'll actually survive a drop or two. Remix hooks Wing span: Currently sweeps out to roughly 108mm across. You can pull the outer hull coordinates further out for a longer wingspan. Vein pattern: Driven by basic hulls intersecting the wing body. Easy to swap in your own grid or voronoi generator. Hinge tolerance: Locked at 0.4mm clearance on the barrels and pins, which works beautifully for standard PLA. If your printer over-extrudes, scale the pin down slightly.