CoreGrip — 50mm L-Bracket
Created 3 months ago
Description
A robust 50mm L-bracket designed for general mounting, repairing furniture, and structural bracing. The model is oriented to lie completely flat on the build plate. This ensures the layer lines run normal to the bending plane, giving the part maximum physical strength and preventing it from snapping under load.
Dimensions
- Arms: 50mm long each
- Material Thickness: 4mm
- Overall Width: 20mm
- Mounting Interface: Two holes, each 5.2mm in diameter (to comfortably clear standard 5mm screws), located in the center of their respective arms.
Photos
Technical views
More like this
Explore more in Home & Fixtures →
Płyta 18mm Nóżka Kątowa 150mm
Nóżka oporowa pod standardową płytę meblową 18 mm. Gniazdo ma 18,6 mm szerokości, co daje luz roboczy pozwalający wsunąć krawędź płyty bez rzeźbienia materiału, z pełnym prześwitem na wylot (brak ścianek czołowych). Dno kanału opada pod kątem, dając około 3 mm różnicy wysokości na 30-milimetrowym odcinku chwytu. Podstawa została rozszerzona do 45x45 mm – przy 150 mm całkowitej wysokości prosty słupek nie utrzymałby obciążeń bocznych. Wymiary montażowe Kanał U: 18,6 mm szerokości, 40 mm głębokości (w najpłytszym miejscu). Mocowanie: Dwa otwory przelotowe 4,5 mm z fazowaniem pod wkręty z łbem stożkowym, rozstaw 14 mm. Wysokość całkowita: 150 mm. Kąt dna: Spadek 3 mm na 30 mm długości profilu. Pasuje do gołych płyt 18 mm (wiórowa, MDF, sklejka). Nie wciśniesz w to płyty 22 mm, a z płytą 16 mm wkręty po obu stronach będą musiały ściągnąć ścianki kanału, co grozi pęknięciem wydruku. Przed drukiem upewnij się, że 3 mm spadek na dnie to właściwy kąt dla twojej zabudowy.
Pendant Canopy With 50mm Mount
Electrical brackets that don't line up with standard covers leave you with a gaping hole in the ceiling and wires hanging out. This ceiling canopy replaces the usual single-point hook system with a direct two-screw mount spaced exactly 50mm apart to mate perfectly with standard central hub brackets. Canopy Diameter: 105mm to comfortably bridge rough plaster holes. Mounting Holes: Spaced at exactly 50mm center-to-center with 5mm clearance for standard bracket screws. Core Pass-through: 8mm internal channel easily clears standard twin-core lighting cable.
Straight Cylindrical Pipe
A straight cylindrical pipe with a uniform wall thickness, designed for fluid transfer, structure, or sleeving. Inner Diameter: 60 mm Outer Diameter: 64 mm Wall Thickness: 2 mm Overall Length: 60 mm
FlowLink Threaded Extension Pipe
A fully 3D-printable, 12-inch extension pipe designed for infinite stacking. The standard slip-fit ends have been replaced with integrated 3mm-pitch metric threads, allowing multiple segments to be screwed together securely without glue. Threaded joints: 21mm male thread with a matching 21.6mm female thread cut into the base, providing 0.6mm of clearance. Support-free design: Internal transitions use 45-degree tapers, eliminating the need for internal supports. Slim profile: Maintains a 25mm outer diameter with a robust 3mm wall.
Twisted Planter With Name Plaque
A 100mm base hexagonal planter with a deep twist and a prominent front plaque. The planter features a solid 5mm-thick wall that precisely tracks the exterior twist, terminating in a flared rim. It includes a central 8mm drainage hole alongside five 10mm perimeter holes. A pill-shaped plaque sits seamlessly flush on the front face, equipped with extruded placeholder text ("NAME") that will export as part of the geometry—ideal for setting up multicolour text in your slicer. Check your drip tray to ensure the 100mm base clears the lip.
Piedino Subwoofer in TPU
Piedino antivibrazioni da 60 mm progettato per subwoofer, con geometrie ottimizzate per l'assorbimento acustico se stampato in TPU. Diametro: 60 mm Altezza: 25 mm Fissaggio: Foro centrale da 5 mm (ideale per viti da 4,5 mm) con svasatura, compatibile anche con montaggio a biadesivo Design: Scanalature concentriche sul fondo per aumentare la flessibilità del materiale e isolare le vibrazioni dal pavimento