Description
Standard toy slides are straight ramps that launch figures directly into the floor. This provides a controlled descending flume with a banked S-curve approach, catching the speed before the drop ends.
Fit & Print Specifications
- Interior Flume: 68 mm wide, accommodating standard 1:6 and 1:12 scale articulated figures.
- Sidewalls: 14 mm retaining walls above the floor, filleted internally at an 8 mm radius to prevent snags.
- Clearance: Reaches 260 mm outward and drops 450 mm vertically.
- Integration: Raw cut ends ready for friction mounts, threaded brackets, or platform adhesives.
Images
More like this
Explore more in Automotive, RC & Hobby →
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
Double Seatbelt Buckle Holder, Backseat
Two seatbelt buckles flop around and fall into the seat gap, so this holder stands both upright side by side in the backseat of a Toyota Sienta. Each 33 x 53 mm pocket goes straight through the base, so the buckle and webbing pass through with nothing blocking the bottom. Pocket size: 33 x 53 mm each, sized for a 31 x 51 mm buckle Sleeve height: 28 mm above a 6 mm base Overall footprint: 130 x 64 mm Centre screw hole: 4.5 mm Print flat on the base, no supports needed
1:37 Tiger I 8.8 cm KwK 36 Barrel
A static 1:37 scale 8.8 cm KwK 36 L/56 gun barrel for the Tiger I, with a muzzle brake and a rear mounting stub. Fitment Scale: 1:37. The tube is 133.2 mm long (4,930 mm full size) and does not include the muzzle brake. Bore: 2.38 mm (88 mm full size). It is modelled as a recess in the brake end, not a through bore. Rear stub: stubd is 6 mm and stubl is 6 mm. These are placeholder values. Measure the mantlet hole on your own kit and set both before printing. Does not fit: any kit with a different mantlet bore. It also does not fit other 88 mm guns such as the KwK 43 or the Flak 36. Details Tapered tube profile, from a thick breech end down to a slim muzzle end. Three reinforcing rings along the tube. Double-baffle muzzle brake with side slots, fused to the tube. Check before printing The mantlet bore diameter. Print the barrel standing upright or lying flat, depending on your printer and the fine detail you want to keep. The brake slots are the finest features.
Formica — Gestufter Ameisen-Napf
Ein kompakter, standsicherer Futternapf für Ameisen und andere kleine Terrarientiere. Die Form ist auf minimale Ertrinkungsgefahr und leichten Zugang optimiert: Mehrstufiger Rand: Erleichtert den Ameisen den Halt und Zugang zur Flüssigkeit. Sanfte Vertiefung: Keine scharfen Innenkanten, sodass Futterreste leicht gereinigt werden können. Flacher Boden: Verhindert ein Umkippen im Terrarium. Der Napf lässt sich ohne Stützstrukturen direkt drucken.
Janome RE10B Hoop Frame
A stripped-down, standalone frame replica for the Janome RE10B embroidery hoop. This is purely the central retaining ring with all machine-mounting hardware, tabs, and locking screws removed, leaving a clean, continuous loop. Dimensions Inner Opening: 100 mm × 40 mm Outer Envelope: 112 mm × 52 mm Depth: 7 mm Verify the 100x40 mm inner bore before printing to ensure your fabric setup will fit correctly. The edges are filleted vertically to recreate the capsule-like profile of the original part.
67mm Lens Cap Strap Clip
Pinching off a lens cap and immediately dropping it in the dirt is an avoidable mistake. This clip mounts directly to a camera strap to hold a 67mm pinch cap securely while the lens is in use, keeping it out of your pockets and off the ground. Strap slot: 42mm wide with a 3.2mm clearance and a diagonal slip-channel, letting it twist onto the webbing without unthreading the strap. Cap receiver: 67.5mm internal groove catches the cap's pinch prongs, with an angled lip to lock them in place. Tether loop: 6mm bore on the side to run a backup paracord lanyard. Print orientation: Internal overhangs are angled to print support-free when placed face-up on the plate.