DraftBlock — Snap-Fit Vent Cap
Created today
Description
A solid plug designed to completely seal an unused round vent or duct. The cover features a flat profile with softly rounded outer edges, hiding the internal void entirely.
Features
- Snap-Fit Mounting: Four downward-facing flexible clips grip the inside of the duct securely.
- Print-Optimized: The clips are thick enough to provide tension but long enough to flex without snapping in PLA or PETG.
- Low Profile: Sits just 3 mm proud of the wall or floor line.
Images
More like this
Explore more in Home & Fixtures →
Straight Cylindrical Pipe
A straight cylindrical pipe with a uniform wall thickness, designed for fluid transfer, structure, or sleeving. Inner Diameter: 60 mm Outer Diameter: 64 mm Wall Thickness: 2 mm Overall Length: 60 mm
Flat-Backed Angled Wall Hook
A 3D-printable wall hook featuring a straight outer spine for a clean visual line against the wall, paired with a curved inner profile that creates a natural resting notch. Straight spine: Sits perfectly parallel to the mounting plate. Inward curve: Adds depth to the hook's catch without thinning the whole shaft. Base plate: 30x30 mm, sized for standard mounting tape.
64mm Hose Holder Clamp
What it's for A heavy-duty saddle clamp designed to securely mount a 64 mm outer-diameter hose. The clamping mechanism uses an M6 bolt and a captive nut on the right ear to tighten the split ring. Dimensions Bore: 64 mm unobstructed passage. Base: 74 mm wide by 70 mm long, 6 mm thick. Mounting holes: Four 6.5 mm clearance holes at the corners. Clamp width: 25 mm thick on the Z-axis. Print notes Print this flat on its base. The hex recess is sized for a standard M6 nut and should bridge without supports on well-tuned printers, but a tiny dab of support inside the hex pocket won't hurt.
Smart Duplex Sconce Plate
An oversized, deep-shell wall plate for a standard US duplex outlet, built to house a Raspberry Pi Zero W and up-and-down sconce lighting. Pi Zero Mount: Integrated standoffs (58x23mm spacing) for M2.5 screws, tucked beside the receptacle. Lighting Control: 5.5mm face cutout for an ambient light sensor. LED Bays: Top and bottom mounting blocks with flush cutouts for dual-directional LED strips. Clearance: 14mm overall depth clears standard hardware while providing internal routing space.
30mm Fluted Drawer Knob
A mushroom-style drawer knob with a straight-fluted grip ring. Designed for environments where hands may be wet, the flutes provide mechanical grip without the complex recesses of a diamond knurl that trap moisture. The part includes a central clearance hole for standard M4 mounting screws. Specifications Cap Dimensions: 30 mm diameter, 18 mm tall Stem Dimensions: 12 mm diameter, 10 mm length Total Standoff: 28 mm Mounting: M4 clearance through-hole (4.5 mm diameter) Grip Feature: 30 vertical flutes
Płyta 18mm Nóżka Kątowa 150mm
Nóżka oporowa pod standardową płytę meblową 18 mm. Gniazdo ma 18,6 mm szerokości, co daje luz roboczy pozwalający wsunąć krawędź płyty bez rzeźbienia materiału, z pełnym prześwitem na wylot (brak ścianek czołowych). Dno kanału opada pod kątem, dając około 3 mm różnicy wysokości na 30-milimetrowym odcinku chwytu. Podstawa została rozszerzona do 45x45 mm – przy 150 mm całkowitej wysokości prosty słupek nie utrzymałby obciążeń bocznych. Wymiary montażowe Kanał U: 18,6 mm szerokości, 40 mm głębokości (w najpłytszym miejscu). Mocowanie: Dwa otwory przelotowe 4,5 mm z fazowaniem pod wkręty z łbem stożkowym, rozstaw 14 mm. Wysokość całkowita: 150 mm. Kąt dna: Spadek 3 mm na 30 mm długości profilu. Pasuje do gołych płyt 18 mm (wiórowa, MDF, sklejka). Nie wciśniesz w to płyty 22 mm, a z płytą 16 mm wkręty po obu stronach będą musiały ściągnąć ścianki kanału, co grozi pęknięciem wydruku. Przed drukiem upewnij się, że 3 mm spadek na dnie to właściwy kąt dla twojej zabudowy.