E-Paper Desk Enclosure
Created 1 months ago
Description
A two-part desktop enclosure built to house a Waveshare 4.2-inch e-paper display and an ESP32 microcontroller. The back housing acts as a weighted wedge stand, providing a 23-degree viewing angle when resting on its bottom face.
The enclosure is designed to print face-down without supports. A dedicated recessed ledge holds the display panel flush against the front bezel, while the deeper lower pocket provides clearance for the ESP32 and wiring.
- Display Window: 86 x 65 mm (suits standard 4.2" active area)
- Internal Clearances: 4.5 mm depth for the screen module, 26 mm depth in the lower pocket for the ESP32
- Hardware: Assembles using four M3 screws through the countersunk front bezel
- Cable Access: 16 x 12 mm side cutout aligns with the ESP32 pocket for USB power
Images
More like this
Explore more in Desk & Tech →
SafeSuit Pro Controller Housing
A loose development board is just a short circuit waiting for a metallic desk. This is a heavy-duty, two-piece wearable housing designed to bolt an ESP32 and LoRa radio down tight, run the cables clean, and put the interface exactly where you can hit it blind. Assembly Clearances Dimensions: 160 × 100 × 45 mm assembled. Screen: 28×16 mm inner cutout with a 32×20 mm outer recess for a flush bezel (fits standard 0.96" I2C OLEDs). Fasteners: Eight 2.5mm ID corner bosses ready for M3 tapping, completely blind from the front face. Printing: Both halves sit flat on the bed. Flip the front cover 180° in your slicer to print face-down without supports.
CareProof V1 Sensor Enclosure
A complete modular enclosure system designed to house the components of the CareProof V1 tracking and monitoring node. The main chassis splits into a generous front housing and an overlapping rear cover, securely fastened with M3 corner screws to provide easy access for wiring adjustments. Included Components Front Housing: 152 × 105 × 28 mm primary shell with dedicated cutouts for a status LED, vent slots, a 24 mm PIR sensor aperture, and an embossed tap zone. Rear Cover: Matching backplate with an 8 mm alignment lip and M3 screw interfaces. NFC Bracket: Removable 50 × 50 mm internal sled to hold a PN532 module directly against the front face. PIR Bracket: Basic 35 × 30 mm retention plate for the motion sensor. Door Sensor Unit: Separate two-piece 40 × 20 mm enclosure designed to hold a standard magnetic reed switch on the client's door.
双风扇免螺丝网络设备外壳
一个为带有双40mm散热风扇和WT32-ETH01模块设计的设备底盒与盖板套装。 尺寸空间：内部预留 10.5 × 6.5 cm 的主板空间。 散热结构：左右两侧外扩式双风扇舱，支持 40×40×10mm 风扇像抽屉一样从下方滑入，外侧配有防触碰百叶栅格。 固定方式：底盒内集成 4 个盲孔定位柱用于垫高和安放主板，网口处设有 U 型支撑座。 免螺丝锁紧：分体式顶盖自带卡扣，盖合时顶盖内侧的下压柱会直接抵住网口金属壳，实现内部模块的免螺丝固定。
Monolith Desk Marker
A heavy, brutalist-inspired desktop marker designed to hold its ground. This double-sided sign is carved deep with a high-impact sans-serif typeface, offering clear identification from either side of a workstation or counter. Design Notes Typeface: Archivo Black (heavy sans, regular weight). Base: Stepped 35mm footprint to prevent tipping on active desks. Carve Depth: 2mm inset text to catch overhead lighting and cast crisp internal shadows without requiring a multi-color print.
19.5mm Desk Edge Puck Mount
Edge-mounted charging cradle sized for the 33.5mm Google Pixel Watch magnetic puck. Designed to drop over a standard 3/4-inch (19.5mm) wood plank. Fitment: The 33.5mm bore sits at the rear of the housing. You push the puck in from the back, then slide the whole assembly over your desk edge — the wood itself traps the puck so it cannot back out. Cable Routing: An 8mm slot on the bottom allows the cable to drop cleanly out of the way. Incompatibilities: Does not fit full-sized phone Qi chargers or desks thicker than 19.5mm without adjustment. Phone hooks have been removed from this version.
CareProof Prototype Enclosure
What it's for A clean, rounded wall-mountable enclosure designed for early-stage home-care technology testing. Features a debossed target for NFC check-ins, a 24mm aperture for a standard PIR motion lens, a 5.5mm status LED port, and generous clearance for a bottom-exit USB-C power connection. The back panel features dual keyhole mounts and is secured by four internal corner bosses. Dimensions Overall size: 152 × 102 × 51 mm (approx. 6 × 4 × 2 inches). Wall thickness: 2 mm. Internal mounting: Four ESP32-WROOM compatible standoffs (25.4 × 48 mm spacing). Back panel: Inset flush fit, sized 147.5 × 97.5 mm. Print notes The main shell should be printed face-down on the build plate. No supports are required for the internal standoffs or corner posts in this orientation. The back panel prints flat. Use standard M3 or #4 self-tapping screws for the panel and PCB standoffs.