Engraved Family Roll-Call Heart
Created today
Description
A classic love-heart pendant with the family names (Mum, Dad, Ada, Avi, Molly) engraved in a neat stack down the front. Two tiny hearts are cut into the upper lobes with their points aimed at the centre, like a pair of arrows pointing in at the names.
- Soft rounded front and back edges
- Names and mini hearts engraved 1 mm deep into a 3 mm thick body
- Ring loop on top for a chain or jump ring
- Prints flat, no supports needed
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
heart hope
A custom heart pendant featuring a smooth, domed face and raised 'hope' lettering. Built with a flat back for easy printing or clasp mounting, and includes an integrated 3.5mm top loop for a necklace string or jump ring. Dimensions: 24mm wide, 2.5mm thick base (4mm total thickness with text). Fitment: 3.5mm hole supports standard jump rings or cord. Print Setup: Prints flat on its back without supports.
Mini tort decorativ aniversare 2 ani
What it's for Un tort în miniatură pe două etaje, cu lumânare și inimioară, ca decor sau cadou pentru ziua unei fetițe de 2 ani. Dimensions Soclu: 70 × 40 × 4 mm Etaj inferior: Ø40 × 14 mm Etaj superior: Ø28 × 12 mm Înălțime totală: aprox. 44 mm Remix ideas Adăugați numele fetiței pe soclu. Înlocuiți inimioara cu o stea sau o floare. Printați în culori pastel diferite.
Haven Embossed Gift Tag
A simple, printable gift tag featuring embossed text and a raised border. Designed for clean dual-color printing using a simple filament swap at Z=2.0mm. Dimensions: 75mm x 35mm Attachment: 5mm hole located near the left edge Customization: The text and base plate thicknesses are separated to make manual pauses straightforward. Print Settings: No supports required. Print flat on the plate with the text facing up.
Insert Numéro Cœur 100mm
Plaque numérotée en forme de cœur, intégrant un chiffre en typographie pixel (Press Start 2P). Conçue comme insert plat pour les centres de table. Spécifications de montage : Largeur hors-tout : 100 mm Épaisseur de la base : 3 mm (mesure critique pour l'insertion dans un porte-carte) Épaisseurs des reliefs : Bordure de 2 mm, chiffre de 2.5 mm Compatibilité : Nécessite un chevalet standard, une pince ou une fente rainurée de 3.2 mm minimum dans votre support de table. Ne tient pas debout seule.
150mm Bayonet Twist Vault
A 150mm mechanical drop-in vault, built around a 50mm twist-lift track. This replaces the friction fit of the original 150mm Borg Friendship Vault with a proper bayonet mechanism. The outer cage runs three 18mm tall helical tracks to guide the core. The top cap terminates in a 40mm hexagonal drive plug; dropping it onto the core and twisting counter-clockwise forces the payload to lift 50mm out of the chassis. Bore Clearance: The 98mm core runs inside a 102mm cage bore. Verify your machine holds tolerances on large cylinders. Support-Free: The massive 90mm flat bridges of the original have been replaced by mechanical vertical slots with 45-degree angled roofs. No supports needed for the cage or core lugs. Payload Capacity: The hollow inner void measures 76mm in diameter by 110mm deep. To assemble, line up the core lugs with the vertical entry slots on the inner walls of the cage, push down to the top stop, and twist right to lock it securely to the bottom.
Snap-Fire — Auto Crossbow
A fully print-in-place auto-reloading mini crossbow. This model is scaled for standard 6mm airsoft BBs and features a gravity hopper that drops the next shot right onto the firing groove every time the string is drawn back. Features Auto-Reload Hopper: Stack 5-6 BBs vertically; pulling the string cycles the next shot. String Guide Tracks: Side rails capture the rubber band on release so it flies perfectly straight without jumping off the barrel. Print-in-Place Trigger: The trigger mechanism prints fully assembled with a built-in pivot pin. Just wiggle it free after printing. String a standard rubber band between the side notches on the front arms and feed it through the guide tracks to shoot.