Flat pack Lego style cab based loosely on the BR Type 47 diesel
Created today
Description
Brute is a hollow, LEGO-compatible cab modelled loosely on the British Class 47 locomotive. It is six studs wide and four deep, with a closed floor that carries a grid of sockets so it presses onto a standard baseplate. Two studs on the nose give a place to clip on headlight pieces.
Features
- Raked twin windscreens and side door windows
- Flat, smooth roof at five-brick height
- Two studs on the front face for headlights
- Lamp recess centred between the headlight studs
- 6×4 socket grid under the floor
Dimensions
- Width: 47.8 mm
- Depth: 31.8 mm
- Height: 48 mm to the roof
- Headlight studs: 4.8 mm diameter, 8 mm either side of centre
Print notes
Print upright on the floor plate, or flipped onto the roof for a clean top surface. Hollow underneath and open at the rear.
Images
More like this
Explore more in Automotive, RC & Hobby →
Freelance Lego fitting cab with Headlight Studs
Brute is a hollow, LEGO-compatible cab modelled loosely on the British Class 47 locomotive. It is six studs wide and four deep, with a closed floor that carries a grid of sockets so it presses onto a standard baseplate. Two studs on the nose give a place to clip on headlight pieces. Features Raked twin windscreens and side door windows Flat, smooth roof at five-brick height Two studs on the front face for headlights Lamp recess centred between the headlight studs 6×4 socket grid under the floor Dimensions Width: 47.8 mm Depth: 31.8 mm Height: 48 mm to the roof Headlight studs: 4.8 mm diameter, 8 mm either side of centre Print notes Print upright on the floor plate, or flipped onto the roof for a clean top surface. Hollow underneath and open at the rear.
Untitled model
Brute is a hollow, LEGO-compatible cab modelled loosely on the British Class 47 locomotive. It is six studs wide and four deep, with a closed floor that carries a grid of sockets so it presses onto a standard baseplate. Two studs on the nose give a place to clip on headlight pieces. Features Raked twin windscreens and side door windows Flat, smooth roof at five-brick height Two studs on the front face for headlights Lamp recess centred between the headlight studs 6×4 socket grid under the floor Dimensions Width: 47.8 mm Depth: 31.8 mm Height: 48 mm to the roof Headlight studs: 4.8 mm diameter, 8 mm either side of centre Print notes Print upright on the floor plate, or flipped onto the roof for a clean top surface. Hollow underneath and open at the rear.
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
Double Seatbelt Buckle Holder, Backseat
Two seatbelt buckles flop around and fall into the seat gap, so this holder stands both upright side by side in the backseat of a Toyota Sienta. Each 33 x 53 mm pocket goes straight through the base, so the buckle and webbing pass through with nothing blocking the bottom. Pocket size: 33 x 53 mm each, sized for a 31 x 51 mm buckle Sleeve height: 28 mm above a 6 mm base Overall footprint: 130 x 64 mm Centre screw hole: 4.5 mm Print flat on the base, no supports needed
Dollhouse Slide Flume
Standard toy slides are straight ramps that launch figures directly into the floor. This provides a controlled descending flume with a banked S-curve approach, catching the speed before the drop ends. Fit & Print Specifications Interior Flume: 68 mm wide, accommodating standard 1:6 and 1:12 scale articulated figures. Sidewalls: 14 mm retaining walls above the floor, filleted internally at an 8 mm radius to prevent snags. Clearance: Reaches 260 mm outward and drops 450 mm vertically. Integration: Raw cut ends ready for friction mounts, threaded brackets, or platform adhesives.
1:37 Tiger I 8.8 cm KwK 36 Barrel
A static 1:37 scale 8.8 cm KwK 36 L/56 gun barrel for the Tiger I, with a muzzle brake and a rear mounting stub. Fitment Scale: 1:37. The tube is 133.2 mm long (4,930 mm full size) and does not include the muzzle brake. Bore: 2.38 mm (88 mm full size). It is modelled as a recess in the brake end, not a through bore. Rear stub: stubd is 6 mm and stubl is 6 mm. These are placeholder values. Measure the mantlet hole on your own kit and set both before printing. Does not fit: any kit with a different mantlet bore. It also does not fit other 88 mm guns such as the KwK 43 or the Flak 36. Details Tapered tube profile, from a thick breech end down to a slim muzzle end. Three reinforcing rings along the tube. Double-baffle muzzle brake with side slots, fused to the tube. Check before printing The mantlet bore diameter. Print the barrel standing upright or lying flat, depending on your printer and the fine detail you want to keep. The brake slots are the finest features.