Happy 40 Birthday Cake Topper
Created today
Description
A solid, 3D-printable birthday cake topper reading "HAPPY 40". Designed for clear legibility from across a room, the text uses a heavy Archivo Black font extruded to a sturdy 4mm thickness. The letters are anchored to a continuous horizontal bridge, ensuring the entire piece remains rigid and prints as a single continuous body. A central, tapered 85mm stake extends from the base for secure insertion into a cake.
- Prints flat as a single solid piece
- 25mm tall text for high visibility
- 4mm overall thickness provides structural rigidity
- 85mm central tapered mounting stake
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
80 Cake Topper With Spikes
A solid replacement for wax candles that inevitably melt over the cake or get knocked over. Features an integrated base bar to keep the digits aligned, deep sturdy stakes to anchor it into the frosting, and flat decorative flames printed right into the design. Print details Dimensions: 6 mm thick, ensuring it's rigid enough not to flex when pushed in. Printability: Prints entirely flat on its back (the -Y face) without any supports. Parts: Single multi-colored print if supported, or prints as a single block in one color.
Mini tort decorativ aniversare 2 ani
What it's for Un tort în miniatură pe două etaje, cu lumânare și inimioară, ca decor sau cadou pentru ziua unei fetițe de 2 ani. Dimensions Soclu: 70 × 40 × 4 mm Etaj inferior: Ø40 × 14 mm Etaj superior: Ø28 × 12 mm Înălțime totală: aprox. 44 mm Remix ideas Adăugați numele fetiței pe soclu. Înlocuiți inimioara cu o stea sau o floare. Printați în culori pastel diferite.
Volumetric Hot Air Balloon Topper
A fully three-dimensional hot air balloon cake topper, taking the silhouette of the cutter and lofting it into a solid centerpiece. The balloon features raised structural ribs along the canopy, sitting above a hollow basket connected by thick rigging lines. Canopy: 70mm diameter sphere, tapered at the base. Mounting: 60mm spike designed to press securely into a cake. Print Notes: This is a fully volumetric model. Depending on your setup, it may require supports under the balloon overhang, or you might prefer splitting it down the middle in your slicer to print in two flat halves.
Snap-Fire — Auto Crossbow
A fully print-in-place auto-reloading mini crossbow. This model is scaled for standard 6mm airsoft BBs and features a gravity hopper that drops the next shot right onto the firing groove every time the string is drawn back. Features Auto-Reload Hopper: Stack 5-6 BBs vertically; pulling the string cycles the next shot. String Guide Tracks: Side rails capture the rubber band on release so it flies perfectly straight without jumping off the barrel. Print-in-Place Trigger: The trigger mechanism prints fully assembled with a built-in pivot pin. Just wiggle it free after printing. String a standard rubber band between the side notches on the front arms and feed it through the guide tracks to shoot.
70mm Santa Face Ornament
A single-piece stylized Santa Claus face ornament, designed to lay flat on the print bed. The model uses raised geometric profiles for the moustache, nose, and hat brim, alongside through-cut eyes and mouth for visual contrast without requiring painted textures. Specifications Dimensions: 70 mm wide, 75 mm tall, 3.5 mm overall thickness. Structural Base: 2.5 mm solid backing layer. Hanging Interface: 5 mm circular bore located in the top pom-pom. Print Settings: Prints flat without supports. A filament swap at Z=2.6 mm allows the raised accents to be printed in an alternate color.
Stylized Snowflake Bell Ornament
A solid, flat-backed Christmas bell ornament designed for straightforward FDM printing. The model combines a traditional flared silhouette with a top bow and an integrated hanging ring. Dimensions: 60 mm wide, 70 mm tall, 3.5 mm total thickness. Structural Base: 2.5 mm thick plate to ensure durability. Surface Details: A raised 1.5 mm border, a central geometric snowflake pattern, and layered bow geometry elevated to the full 3.5 mm height. Mounting: Features a clean 5 mm diameter hole in the top ring for string or wire hangers. Prints completely flat on the bed with no supports required. Ideal for PLA or PETG.