Harmonica Acoustic Silencer
Created today
Description
A two-piece, snap-fit acoustic silencer for a standard 10-hole diatonic harmonica (like the Fender Blues Deluxe).
- Features a continuous lip opening for unrestricted playing across all 10 holes.
- Integrated three-chamber acoustic labyrinth forces exhaust air and sound through a tortuous path, reducing volume while maintaining airflow.
- Internal cavity includes space for 4mm acoustic foam (to be added manually).
- 6-point integrated snap-fit and alignment pin system requires no extra hardware.
Print both halves flat on the build plate. No supports should be strictly necessary for the main geometry.
Images
More like this
Explore more in Desk & Tech →
双风扇免螺丝网络设备外壳
一个为带有双40mm散热风扇和WT32-ETH01模块设计的设备底盒与盖板套装。 尺寸空间：内部预留 10.5 × 6.5 cm 的主板空间。 散热结构：左右两侧外扩式双风扇舱，支持 40×40×10mm 风扇像抽屉一样从下方滑入，外侧配有防触碰百叶栅格。 固定方式：底盒内集成 4 个盲孔定位柱用于垫高和安放主板，网口处设有 U 型支撑座。 免螺丝锁紧：分体式顶盖自带卡扣，盖合时顶盖内侧的下压柱会直接抵住网口金属壳，实现内部模块的免螺丝固定。
Aero — Windowed iPhone 13 Case
A custom-fit TPU or rigid shell for the iPhone 13. This model secures the device by preserving the upper retaining lip around the entire perimeter. The button zones have been converted from open edges into generous side windows—exposing the hardware for clean, tactile presses while maintaining the structural rigidity required for a snap-on fit. Features Retained Lip: The front edge wraps uninterrupted around the face of the phone to keep it locked in. Button Windows: Wide, centered side cutouts give your thumbs unobstructed access to the volume, mute, and power hardware. Camera & Port Clearance: Precise cutouts for the rear camera bump and the bottom lightning/speaker array. Print notes If printing in rigid filament (PLA/PETG), ensure your printer is well-calibrated; a slightly tighter tolerance may snap. TPU is recommended for the best balance of flex and grip.
Solid Back iPhone 13 Case
A custom-fit TPU or rigid shell for the iPhone 13 that prevents the phone from slipping or taking raw impacts on the edges. The back is a solid panel for maximum protection. The button zones feature wide windows rather than thin button-covers, exposing the actual hardware so you get the real tactile click of the buttons without fighting the case material. Print Notes Fit Tolerance: Exact to the iPhone 13 body (71.5 mm x 146.7 mm). Material: TPU is highly recommended to let the lip flex over the screen edge. Rigid filaments like PETG will be a very tight snap-fit.
Retro TV Enclosure v2
A reinforced retro TV enclosure designed for an RP2040 video player project. The walls have been bulked up for extra durability without compromising the interior payload space, while side-firing one-inch speaker grilles and a classic bent antenna give it a finished look. What it's for Built to house a no-solder RP2040 media player. The clamshell locks together with an integrated friction fit and the entire model prints flat on the bed with zero supports. Dimensions Internal volume: 150 × 80 × 50 mm Wall thickness: 5 mm (beefed up from standard) Grilles: 25.4 mm (1 inch) perforated arrays on the left and right panels Assembly Both halves print cleanly flat. Slide your display into the front bezel's chamfered recess, route the cables out the back USB port, and firmly press the halves together until the interior ridges lock.
TCG Pre-Grading Imaging Stand
A two-piece cantilever imaging stand engineered specifically for trading card pre-grading and the iPhone 16 Pro. The design strips away light-blocking walls in favour of an open C-arm structure, allowing desk lamps to rake across the card from three sides without casting harsh structural shadows. The stand breaks down into two separate pieces for flat printing without supports. Raised Pedestal: Sized at 64x89mm to fit standard raw or penny-sleeved cards (like Pokémon or MTG). The raised platform prevents edge-shadows that occur when cards lie flat on a desk. Tactile Phone Rails: Raised outer guides sit flush with the iPhone 16 Pro's straight edges, bypassing the camera bump. Push the phone flush into the top-left corner rails to perfectly centre the lenses over the card. Focal Clearance: Suspends the phone 160mm above the card, providing the ideal distance for macro focus while keeping the entire card squarely in the frame.
Nokia 225 4G Minimal Case
A streamlined, form-fitting protective case for the Nokia 225 4G (2024). Built to exact dimensions for a secure snap-fit that leaves the device accessible but well-protected. Clearances: 0.5 mm inner tolerance for a snug fit. Ports: Dedicated circular cutouts for camera and flash; accessible USB-C and 3.5 mm jack. Profile: Minimalist solid back plate with a heavily rounded outer shell.