Monolithic Grid Advent Calendar
Created today
Description
A complete, print-in-place Advent calendar designed specifically to fit on the Bambu Lab A1 Mini (180x180x180 mm build volume).
It features exactly 24 sliding drawers arranged in a space-efficient block, numbering from 1 to 24 sequentially. The top two rows contain 8 larger drawers perfect for bigger treats, while the bottom four rows hold 16 smaller drawers.
Print-in-Place Design
- Ready to Slide: The drawers and frame are printed together as a single unit. Tolerances are tuned (0.4 mm on sides and bottom, 1.0 mm on top) so the bridging above each drawer naturally sags without fusing the parts together.
- Zero Assembly: No separate rails, glue, or snap-fit parts to mess with.
- Easy Grip: Each drawer features a neat little half-circle finger notch at the top, making them easy to pull open.
Printing Tips
- No Supports: Do not generate supports, as they will fill the internal gaps and fuse the drawers to the frame.
- Cooling: Ensure your part cooling fan is running high so the bridges above the drawers stay relatively crisp.
- Material: Standard PLA works perfectly. White gives it a clean, classic winter look.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
70mm Santa Face Ornament
A single-piece stylized Santa Claus face ornament, designed to lay flat on the print bed. The model uses raised geometric profiles for the moustache, nose, and hat brim, alongside through-cut eyes and mouth for visual contrast without requiring painted textures. Specifications Dimensions: 70 mm wide, 75 mm tall, 3.5 mm overall thickness. Structural Base: 2.5 mm solid backing layer. Hanging Interface: 5 mm circular bore located in the top pom-pom. Print Settings: Prints flat without supports. A filament swap at Z=2.6 mm allows the raised accents to be printed in an alternate color.
Stylized Snowflake Bell Ornament
A solid, flat-backed Christmas bell ornament designed for straightforward FDM printing. The model combines a traditional flared silhouette with a top bow and an integrated hanging ring. Dimensions: 60 mm wide, 70 mm tall, 3.5 mm total thickness. Structural Base: 2.5 mm thick plate to ensure durability. Surface Details: A raised 1.5 mm border, a central geometric snowflake pattern, and layered bow geometry elevated to the full 3.5 mm height. Mounting: Features a clean 5 mm diameter hole in the top ring for string or wire hangers. Prints completely flat on the bed with no supports required. Ideal for PLA or PETG.
Raised Star Ornament
A 70 mm five-pointed star ornament designed to print flat on the build plate. It features a smaller raised star and radiating decorative lines on the front face, adding visual interest while remaining easy to print without supports. 70 mm overall width 5 mm integrated hanging hole 2.2 mm base thickness with an additional 0.8 mm raised pattern Flat back for bed adhesion
80 Cake Topper With Spikes
A solid replacement for wax candles that inevitably melt over the cake or get knocked over. Features an integrated base bar to keep the digits aligned, deep sturdy stakes to anchor it into the frosting, and flat decorative flames printed right into the design. Print details Dimensions: 6 mm thick, ensuring it's rigid enough not to flex when pushed in. Printability: Prints entirely flat on its back (the -Y face) without any supports. Parts: Single multi-colored print if supported, or prints as a single block in one color.
150mm Bayonet Twist Vault
A 150mm mechanical drop-in vault, built around a 50mm twist-lift track. This replaces the friction fit of the original 150mm Borg Friendship Vault with a proper bayonet mechanism. The outer cage runs three 18mm tall helical tracks to guide the core. The top cap terminates in a 40mm hexagonal drive plug; dropping it onto the core and twisting counter-clockwise forces the payload to lift 50mm out of the chassis. Bore Clearance: The 98mm core runs inside a 102mm cage bore. Verify your machine holds tolerances on large cylinders. Support-Free: The massive 90mm flat bridges of the original have been replaced by mechanical vertical slots with 45-degree angled roofs. No supports needed for the cage or core lugs. Payload Capacity: The hollow inner void measures 76mm in diameter by 110mm deep. To assemble, line up the core lugs with the vertical entry slots on the inner walls of the cage, push down to the top stop, and twist right to lock it securely to the bottom.
Snap-Fire — Auto Crossbow
A fully print-in-place auto-reloading mini crossbow. This model is scaled for standard 6mm airsoft BBs and features a gravity hopper that drops the next shot right onto the firing groove every time the string is drawn back. Features Auto-Reload Hopper: Stack 5-6 BBs vertically; pulling the string cycles the next shot. String Guide Tracks: Side rails capture the rubber band on release so it flies perfectly straight without jumping off the barrel. Print-in-Place Trigger: The trigger mechanism prints fully assembled with a built-in pivot pin. Just wiggle it free after printing. String a standard rubber band between the side notches on the front arms and feed it through the guide tracks to shoot.