Monolithic Sleeved Deck Vault
Created 1 months ago
Description
The monolithic deck vault is a formidable shell forged to protect a 100-card sleeved arsenal. Rising with sheer, chamfered faces and an unyielding silhouette, this two-piece container guards a Magic deck while keeping it ready for deployment. The deep front scallop grants immediate thumb access to the top card, allowing swift, one-handed draws in the heat of a match.
Arsenal Specifications
- Capacity: Precisely dimensioned to cradle a sleeved 100-card deck with a 2mm operational tolerance.
- Hinge Mechanism: Features a structural knuckle hinge designed to accept a length of raw 1.75mm filament as a high-strength pivot pin.
- Deployment: A deep thumb sweep on the primary face ensures zero friction when slipping the top card free.
Images
More like this
Explore more in Storage & Organization →
Sentinel Deck Vault
A robust, two-piece deck box built for transport and easy access. Designed to hold 100 double-sleeved 63x88mm trading cards, it features a snug snap-fit lid to prevent spills in your bag. Secure Closure: Friction-fit lip with spherical snap detents. Easy Access: Deep thumb cutouts on the front and back let you grab the whole deck at once. Sturdy Build: Thick 2.4mm outer walls for solid protection.
Angled Desktop Pen Organizer
A solid, monolithic 20-hole desktop organizer built to fit cleanly under low monitors or 125 mm shelves. Each blind channel angles downward at 30 degrees, keeping standard pens securely nested while displaying their ends for quick access. Capacity: 20 angled slots (12 mm bore) Footprint: 100 × 100 mm Height: 125 mm Features: Chamfered openings for easy insertion, rounded external edges
35mm Fan Storage Plaque
A flat storage plaque designed to hold three standard 30mm fans. The 35mm recessed pockets provide plenty of clearance for the fans and their wiring, while the raised lettering at the top is structured specifically for manual filament swaps on printers without multi-material systems. Base Dimensions: 145mm × 80mm × 10mm Pocket Size: 35mm diameter, 8mm deep Text Extrusion: 2mm height above the top surface Print Settings: Switch filaments at the 10mm layer height to highlight the text.
Sofa Gap Console Organizer
Gaping voids behind the sofa exist solely to swallow remotes and trap charging cables. This station drops directly over the gap between two console tables. It bridges the space entirely, holding a full-size tissue box, routing two charging cables cleanly out of sight, and keeping remotes exactly where you left them. Gap clearance: The 507mm base includes 30mm resting flanges on both ends to span gaps safely and distribute the load. Tissue compartment: A 230x124mm central cavity fits standard flat rectangular tissue boxes underneath a flush, drop-in cap. Cable management: The right-side phone station features a generous rear-access hollow designed to hide a multiport charger and feed cables directly up into the two 15-degree angled slots. Print specs: Prints as two pieces. The main body needs a large print bed (or slicer splitting) due to the half-metre span. No supports required.
150mm Tapered Hair Tie Stand
A vertical storage stand designed to hold hair ties. The central post tapers continuously from base to tip, allowing elastic bands of varying diameters to settle at their natural resting heights. A wide, thick base prevents the assembly from tipping under off-center loads or when bands are removed. Specifications Post Dimensions: 150mm height, tapering from a 50mm base diameter to a 25mm upper diameter. Base Dimensions: 120mm diameter and 25mm thickness for structural stability. Cap: 25mm spherical terminal to prevent snagging during removal. Print Recommendations: High-density infill in the base section is required to provide the intended counterweight.
