Physiotherapist Keychain, 70x40 mm Bold
Created today
Description
What it's for
A two-colour keychain for a physiotherapist: white plate, teal raised lettering and symbol. "Dr. Sonal" is large and bold, with "PHYSIOTHERAPIST" in wide heavy capitals beneath it, sized to stay legible with a 0.4 mm nozzle.
Dimensions
- Plate: 70 × 40 × 3 mm, rounded corners, flat back
- Raised text and symbol: 0.8 mm
- Bottom line: 5.6 mm letter height, about 62 mm wide
- Keyring hole: 4.5 mm, top-left, with a 9 mm reinforcing ring
Remix ideas
- Swap the name or title for another practitioner
- Change the teal to any second filament colour
- Replace the spine and figure with another clinic symbol
Images
More like this
Explore more in Keychains & EDC →
Sleutelhanger Elisabeth, Courgette, 62 mm
Sleutelhanger met de naam "Elisabeth" in Courgette-letters, bedoeld voor een standaard sleutelring. Eén stuk, in één kleur te printen. Voor het printen controleren Breedte van de naam: 62 mm, plus de rand ongeveer 70 mm. Gat in het oogje: 4,5 mm, geschikt voor een gewone sleutelring. Een dikkere ring past niet. Dikte: 2 mm ondergrond, letters 3,2 mm hoog. Past niet bij Karabijnhaken met een dikke ogen of brede band. Het gat is te klein.
Stacked Name Keychain Pendant
A black keychain pendant with bold white stacked lettering reading Nodi / Mani / Yani and a small red heart beside the last line. The loop sits above the N. Remix hooks Loop position: centred at about X 2, Y 33 with a 9 mm outer and 4.5 mm hole. Shift it or enlarge the outer diameter for a stronger ring. Heart gap: the heart sits about 1 mm clear of the final letter. Change its X offset (34.2) to adjust spacing. Layer heights: 3 mm black base, 2 mm raised white lettering and red heart, 5 mm total. Font: Archivo Black at 8.5 mm; swap for a rounder face for a softer look. Pairs with: a split ring or small carabiner; assign black, white and red to separate AMS filaments.
LANA Heart AHMED Keychain Nameplate
A three-colour keychain nameplate reading LANA ♥ AHMED, about 60 × 10 mm and 5 mm thick: a 3 mm black base with white letters and a red heart raised 2 mm on top. A black loop on the left end has a 4.5 mm through-hole for a standard key ring. Remix hooks Base thickness (3 mm): the number that sets the plate's heft. Drop it for a lighter tag. Raised height (2 mm): letters and heart share it. Make the heart taller for emphasis. Loop hole (4.5 mm): widen it for thicker rings or cord. Backing margin (1.5 mm): the black border around the letters. Thicken it for a sturdier outline. Names and font: the text is DM Serif Display at about 7 mm tall. Swap the names or the typeface. Pairs well with a metal split ring. Each colour is a separate region for AMS assignment.
Simao Split-Ring Tag
Standard rectangular tag drilled for a 5 mm split-ring. Dimensions to check: Fits standard 20 mm to 30 mm key rings. Clearance bore is 5 mm. Overall length 60 mm, thickness 4 mm including the raised lettering. Does not include chamfers for sliding into tight leather key wallets. Matches Simao.
Bouquet Initial Keychain
What it's for A personal keychain built with raised script initials framed by an asymmetrical floral arrangement. The flowers cluster heavily at the base and taper up the sides in a crescent bouquet, leaving the top mount area clean and open. Dimensions Base diameter: 44 mm Plate thickness: 2.5 mm Relief depth: Initials and flowers stand 1–1.5 mm proud of the base Print notes Standard 0.2 mm layers work well; no supports required. The raised elements are flat-topped to make an intentional filament swap cleanly separate the base colour from the text and flowers.
60mm Keyring Carabiner Clip
A 60x30mm print-in-place compliant carabiner designed to interface with standard split-ring keychains and lightweight everyday carry items. The frame features a 5mm constant cross-section with alternating triangular truss cuts along the spine to reduce material weight without compromising the hinge action. Fitment and Tolerances Clearance: The interlocking latch mechanism relies on a 0.4mm printed gap. Ensure flow rate and horizontal expansion are calibrated to prevent the gate from fusing to the catch. Hardware: Accepts standard flat or wire keyrings up to 4mm in thickness through the inner loop. Incompatibilities: This is a decorative thermoplastic clip for keys and pocket tools. It is strictly non-load-bearing. Do not use for climbing, rigging, securing heavy equipment, or any life-safety applications.