projected displayit
Created today
Description
A heavy, grounded display pedestal featuring an oversized, tapered rectangular frame. Designed to house a graded trading card or slab, it features a built-in cavity underneath for a 72mm LED puck light. The uplight casts through the vented base to illuminate the card inside the pass-through tunnel.
Remix Hooks
- Base footprint: The base extends well beyond the frame to give it a solid stance — currently 200x120mm on the bottom tier.
- Frame pitch: The upper frame tapers deeply front-to-back while maintaining a steady 150mm width, giving the whole piece a commanding silhouette.
- Text & Shadow Carvings: The "DISPLAYIT" front text (size 8 Marcellus) and the abstract, smoke-like internal wall carvings are perfect candidates to tweak depending on what theme your display needs.
Images
More like this
Explore more in Decor & Display →
Unlit Sconce and Key
An unlit standing sconce with an empty basin and a fluted column. Features: Studded, stepped pedestal base Deeply fluted column with a central keyhole Separate antique-style skeleton key designed to fit the lock
GIVVY — Toploader Display Stand
GIVVY Display Stand brings a bold, architectural frame to your favorite sleeved or toploaded trading cards. The design couples a stable, low-profile sloped base with a prominent vertical backboard, acting as a canvas for the heavy, embossed typography. It's built in a single unyielding piece—ready to anchor a desk or elevate a display case without tipping. Dimensions Overall Footprint: 105mm wide × 46mm deep Height: 65mm total Card Slot: 90mm long, 5.5mm wide, pitched backward at a gentle 5 degrees for the optimal viewing angle. Print Notes Prints entirely without supports on its flat base. The raised lettering extends 3mm outward, easily catching overhead lighting for sharp contrast. Consider swapping filaments right at the 65mm Z-height (or painting the raised text) to make the branding pop.
LBA Graded psa tier display Stand
What it's for A single-piece desktop stand designed to hold and display a standard trading card in a rigid plastic top loader (approx. 76 × 102 mm). It captures the bottom edge of the sleeve while keeping the artwork fully unobstructed behind a deep U-shaped front cradle, pitched back at a 12-degree viewing angle. Dimensions Overall Footprint: 96 mm wide × 44 mm deep. Height: 38 mm (excluding the inserted card). Card Slot: 79.5 mm wide × 4.5 mm thick, ensuring enough clearance for standard top loaders to slide in smoothly without excessive wobbling. Print notes Designed to print entirely without supports in a flat, natural orientation. The geometry has been tuned to ensure clean external overhangs and uses generous radiuses everywhere to maintain strength around the captured slot. Recommended for standard FDM printing.
SMG-11 — Red Dot Machine Pistol Replica
SMG-11 is a life-size, non-functional display replica of the compact machine pistol from Rainbow Six Siege, built in the MAC-11 pattern. The magazine is a separate piece that slides out of a real well in the grip, and a rail-mounted red dot sight sits on top. Features Removable magazine with baseplate, feed lips, catch notch and witness holes Grip with mag well, side texturing, mag release button, trigger and trigger guard Boxy receiver with ejection port, side serrations, safety lever and front sling loop Grooved barrel with muzzle ring Top rail with cross slots, front sight with ears and cocking knob Red dot sight with housing, turrets, battery cap, lens and dot Open wire stock Print notes Overall length is about 280 mm with the stock, so it needs a large bed or splitting into sections. Print the magazine separately, baseplate down. The well has about 0.3 mm clearance per side. Wire stock rods may need supports. Display piece only; it has no working mechanism.
Givvy Display Logo
A thick, rounded "GIVVY" logo designed specifically for multi-color FDM printing (AMS/MMU). The text features a solid aqua centre surrounded by a continuous purple outline that merges the letters into a single, cohesive piece. Scaled perfectly for mounting onto a trading-card display stand. Dimensions: ~94 mm wide, ~31 mm high, and 3.2 mm thick. Format: Co-planar separate regions for the centre and outline, allowing easy assignment of different filaments in your slicer. Mounting: Perfectly flat back for flush gluing to display stands or frames.
Curved Script Chili Sign
A solid-backed, flat-printing chili pepper display sign styled like a vintage embroidered restaurant logo. The lettering is wrapped along a shallow crescent arc using a flowing, connected script font, layered with a dark stepped outline to give it a physical embroidered look. Everything sits flush on the Z=0 plane for easy multi-color filament swapping on any FDM printer. Remix Hooks The Curve Radius: The text is mapped along an arc with a 200 mm radius. Dropping that to 150 mm gives a much steeper smile, while pushing it to 300 mm flattens it out. Text Spacing: The script kerning is tied to a custom letter spacing offset. Adjusting this tightens or spreads the cursive connections. Outline Depth: The dark outline is offset by 1.5 mm. Bump that up for a thicker border.