Quick-Access Slim Card Wallet
Created 5 months ago
Description
A minimalist, slim everyday carry wallet designed specifically to hold a tight stack of 6 credit cards. It features a smartly stepped thumb cutout at the base that lets you easily eject your cards, while giving the primary front card an extra push upward for instant access.
What it's for
- Perfect for minimalists looking to ditch bulky, heavy leather wallets.
- Great for carrying just your absolute essentials: ID, transit card, and primary payment cards.
- The two-stage thumb cutout allows you to naturally push your top card out further than the rest, which is ideal for quick contactless payments or showing an ID.
Dimensions
- Inner pocket: 86.5mm x 55mm x 6mm, precisely tuned to hold a snug stack of six standard (CR80/0.76mm thick) credit cards.
- Outer profile: Keeps an ultra-slim form factor with a durable 2mm outer wall.
- Top edges are nicely chamfered to allow for smooth insertion of cards.
Remix ideas
- Adjust the thickness to accommodate 4 cards for Ultra-minimalists, or 8 cards for a heavier carry.
- Personalise the front face with an embossed monogram, name, or design.
- Add a lanyard hole or keychain loop to one of the bottom corners.
- Ask to add a geometric cutout pattern on the back to reduce weight and show off the cards inside.
Photos
Technical views
More like this
Explore more in Keychains & EDC →
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.
Minecraft Grass Block Keychain
What it's for A keychain shaped like a Minecraft grass block: smooth brown dirt body, green grass cap that overhangs slightly, and blunt, irregular grass drips on all four sides. A sturdy corner loop takes a key ring. Dimensions Approx. 27 × 27 × 28 mm Cap about 5 mm thick; drips 3.5–8 mm long Loop hole about 4 mm, at one top corner Remix ideas Swap colours for mycelium or snow blocks Change drip layout Enlarge the loop hole for a lanyard
Jeton — Porte-clés de chariot
Jeton de caddie à porter au porte-clés : un disque robuste avec une oreille percée pour l'anneau, et un léger creux sur une face pour coller une pastille ou une étiquette. Dimensions Disque : Ø 24 mm, épaisseur 2,4 mm Oreille : Ø 12 mm, trou de Ø 5 mm Creux : Ø 18 mm, profondeur 0,8 mm Impression À plat, sans supports PLA ou PETG, 3 périmètres conseillés
60mm Keyring Carabiner Clip
A 60x30mm print-in-place compliant carabiner designed to interface with standard split-ring keychains and lightweight everyday carry items. The frame features a 5mm constant cross-section with alternating triangular truss cuts along the spine to reduce material weight without compromising the hinge action. Fitment and Tolerances Clearance: The interlocking latch mechanism relies on a 0.4mm printed gap. Ensure flow rate and horizontal expansion are calibrated to prevent the gate from fusing to the catch. Hardware: Accepts standard flat or wire keyrings up to 4mm in thickness through the inner loop. Incompatibilities: This is a decorative thermoplastic clip for keys and pocket tools. It is strictly non-load-bearing. Do not use for climbing, rigging, securing heavy equipment, or any life-safety applications.
TurnAssist — T-Bar Key Grip
Introducing TurnAssist, a heavy-duty T-bar grip engineered to bring real leverage to stiff locks. Designed specifically for individuals dealing with weak or arthritic hands, it transforms a standard house key into a robust, easy-to-grasp handle. The key secures firmly into the 3mm slot using a standard 1.75mm filament snippet as a locking pin. Features High-Torque Geometry: Configured to be printed flat on the build plate. This aligns the layer lines perpendicular to the turning force, ensuring the handle won't shear under pressure. Flush Pin Clamping: The locking pin passage is counterbored. Filament only needs to be threaded through the center, and snipped ends stay fully recessed to prevent scratching. Accessible Profile: The 60mm wide, 20mm thick crossbar provides a comfortable and secure resting surface for the palm and fingers.
Minimalist Concert Ola Keychain
A sleek, minimalist keychain bearing the word "ola" in the Concert One font. The lowercase letters are gently thickened to form a continuous, sturdy body, finishing in a small heart on the right side. Design Features Integrated Keyring Tab: A reinforced loop in the top-left corner is ready for standard split rings. Continuous Body: Offset text creates a solid, unified piece that prints securely and cleanly. Friendly Silhouette: The Concert One typeface combined with a minimal heart provides a smooth, tactile feel.