(remixed) AEROFLARE — Wide Upholstery Nozzle
Created 3 months ago
Description
Introducing the AEROFLARE, a custom expansion accessory for your Dyson V11. Instead of a narrow crevice design, this attachment sweeps out into a wide, flattened head that dramatically increases surface coverage. It is purpose-built for tackling broad fabric areas like mattresses, sofas, and automotive upholstery, allowing for smooth, efficient passes over larger materials.
Features
- Wide Sweeping Head: Flares out to a 75mm flat opening for maximizing surface contact on every pass.
- Precise Interface: Features a 35.5mm inner diameter sleeve tailored to fit over a standard 35mm Dyson V11 wand collar, ensuring a secure 25mm deep friction fit.
- Robust Walls: Built with a uniform 2mm thickness to maintain durability when pressing down on soft surfaces.
Ideal Applications
- Detailing couches and living room furniture.
- Vacuuming carpeted stair treads swiftly.
- Cleaning large automotive floor mats and trunk linings.
Images
More like this
Explore more in Workshop & Tools →
Machined-Style NPT Blow Gun Nozzle v4
An air compressor adapter designed to interface a 1/4" NPT blow gun with a precise 3mm outer-diameter nozzle. The part features a clean, support-free geometry that steps inward as it prints, transitioning smoothly from a 14mm hex base up through the threads, capping off with a reinforced 1mm fillet at the base of the delicate tip. Print and Application Notes Print Orientation: Prints exactly as oriented (hex base flat on the bed). No supports are required for the threads, ceiling, or nozzle. Sealing: The threads are rendered straight rather than tapered—wrap with a couple of layers of PTFE thread tape to ensure a tight pneumatic seal when threading into the metal gun. Material: PETG or ABS is highly recommended over PLA to handle the pressure spikes and avoid brittleness at the tiny 1mm bore tip.
8-Inch Wide Mouth Funnel
A large-capacity funnel designed with an 8-inch top diameter and a 2-inch bottom opening. Built with 3mm walls and a reinforced upper lip for rigidity during heavy use. 203.2 mm (8 in) top opening 50.8 mm (2 in) bottom spout 101.6 mm (4 in) cone depth 50.8 mm (2 in) spout length 3 mm wall thickness
Packout M18 Router Insert
What it's for A custom drop-in tray engineered to convert a half-section of a Standard Milwaukee Packout Organizer into a dedicated M18 router station. It features a contoured cradle for the router body with its battery attached, a wide pocket for the base plate, a large accessory bay for the edge guide and wrench, and a 12-slot storage grid for 1/4-inch shank router bits. Scalloped finger pulls make it easy to lift the router out. Dimensions Footprint: 280 mm × 200 mm Height: 60 mm Bit Storage: 12 holes, 7.2 mm diameter (for easy clearance of standard 1/4" shanks) Print notes Given the large 280 mm length, this will require a reasonably large print bed. A robust infill (15–20% gyroid) is recommended to support the weight of the tool. The design rests entirely flat on the build plate and requires no supports.
Stud-Saddle Drop Shelf
A heavy-duty drop shelf designed to wrap a standard 2x4 wall stud. The main bed splits into two pieces for easy printing on a standard bed, locking together with precision alignment dowels. A central support leg drops down directly into a face-mounted stud bracket to hold heavy loads flat. No-Support Printing: The main plates are oriented perfectly flat off the bed. Locked-In Support: The drop leg features a tubular bottom that seats perfectly into a cupped bottom bracket, preventing lateral slip. Hardware Needed: A few 6mm rod pins for the hinges, and standard countersunk wood screws for the brackets.
1/4" NPT Golf Grip Air Adapter v2
Adapter to mate a 1/4" NPT air compressor blow gun directly to a golf club grip vent hole. Uses a 16mm hex drive for tightening. Fitment Notes Mating Surface: 1/4" NPT female blow gun ports. The model uses a straight 18 TPI thread (13.5mm OD) that relies on Teflon tape to seal against the tapered female bore. Output: 3mm OD nipple, 4mm long. Backed by a 3mm conical shoulder to prevent snapping under pressure. Bore: 1mm continuous air channel. Check this after printing — a 1mm FDM hole will likely need clearing with a wire or a 1mm drill bit before it flows air properly.
Industrial Pipe and Fittings
A modular set of pipe fittings featuring a 10-inch straight rod, a perpendicular tee joint, and a straight coupling. Each piece is built around a standard 3/4-inch core diameter with robust 4mm walls to withstand practical shop use. 10-Inch Rod: Basic structural member, printed flat for optimal layer strength. Tee Joint: Three-way connector with matching bore. Straight Coupling: 60mm sleeve for joining lengths end-to-end.