Ribbed Classic Gold Vase
Created today
Description
What it's for
A classic bulbous vase profile featuring a fine horizontal ribbed texture. The ridges mimic thrown pottery or traditional ceramics, catching highlights across the curved surface while remaining fully watertight and easy to print.
Dimensions
- Height: 210 mm
- Max Width: ~204 mm
- Base/Opening: ~80 mm
- Wall Thickness: 4 mm
Print notes
- Designed for standard FDM printing without supports.
- The 4mm wall thickness ensures it is robust and watertight if printed with adequate perimeters.
- The horizontal ridges print perfectly smoothly without the overhang issues often associated with heavy textures.
Images
More like this
Explore more in Decor & Display →
Ivory Folded Ceramic Vases
A trio of statement centerpiece vases designed with deep organic grooves, sweeping necks, and soft ivory tones. Each piece balances a minimalist ceramic aesthetic with flowing, fabric-like curves, ready to print as functional tabletop decor. Low Spiral Vase: A wide, dramatic base that twists upward through 140 degrees into a slightly offset neck. Tall Wavy Vase: The anchor of the set, standing 210 mm tall with crisp vertical ribs and a gentle 45-degree rotation. Asymmetric Curved Vase: A sweeping swan-like profile that leans dynamically off-center with a reverse twist. Print Notes: Designed to be printed in standard FDM standard mode (hollowed out with 2.5 mm walls, rather than vase mode) for maximum rigidity and heft. No supports required. Ensure your print bed is well leveled to anchor the large flat bases securely.
Reeded Table Lamp
A modern reeded table lamp designed to stand independently on a desk, nightstand, or cabinet. The design has been re-proportioned to be shorter and wider, offering a grounded, substantial look. Customization & Assembly Main Shade: Measures 130mm tall and 140mm wide, heavily textured with vertical reeds. It simply slides over the base lip. Base Stand: Sits flat on the table with a 25mm height. It features a standard 42mm hole for an E27 socket and a discreet bottom channel for cable routing. Top Diffuser: A drop-in cap that hides the bulb and softens the upward light. All three pieces are designed to be printed easily without supports. The modular drop-in fit makes swapping bulbs or modifying the shade's color later straightforward.
Quick Print Twisted Vase
Вазните што го блокираат печатарот по 14 часа само за да протечат при првото полнење со вода се бескорисни. Ова е геометриска вазна со извртен профил, дизајнирана со константни ѕидови од 1.5 милиметри. Не ви требаат трикови во слајсерот или vase mode — само пуштете ја со стандардни поставки и се печати брзо бидејќи главата не прави непотребни движења. Дијаметар: 90 mm Висина: 180 mm Дебелина на ѕид: 1.5 mm (цврсто и водоотпорно) Печатење: Без никакви потпори
140mm Gothic Church Mating Volume
A single-piece gothic church shell, dimensioned around a 140x68mm footprint. It features a completely hollow interior volume spanning the nave, tower, and aisles, surrounded by a continuous 2mm exterior wall. The model replaces solid block-style architectural prints with a true open-void structure. Before you slice, check your bridging setup—the steep 2:1 roof pitches are designed to print without interior supports, and the exterior flying buttresses and lancet windows are self-supporting, but the massive unified interior void will test your layer adhesion if you scale it down too far. Specs to verify: Overall Footprint: 140mm (length) × 68mm (width). Peak Height: 160mm at the front spire. Minimum Wall: 2mm throughout. Fitment: Does not snap to or mate with specific terrain bases—flat-bottomed for open plate placement.
38mm Tealight & Fluted Vase Set
Art Deco style vase and tealight holder set with matching vertical fluted profiles. The vase is sized at 200mm tall to accommodate standard bouquets, while the tealight holder has been raised to a 75mm pedestal height to balance the set visually. The holder features a precision 40mm bore, leaving exactly enough clearance for a standard 38x16mm tealight candle to sit flat without binding. Critical Dimensions: Vase: 200mm height, 80mm outer diameter. Holder Bore: 40mm diameter x 16mm deep (fits 38mm standard tealights). Holder Height: 75mm.
150mm Layered Sailboat Emblem
A stylized, multi-layered 3D sailboat emblem built from crisp geometric sweeps. The design sets a long, sweeping hull against towering, detached triangular sails, with the entire structure sitting atop three separated, flowing wave ridges. Features stepped heights across the elements to create a sharp depth effect, completely flat on the back for easy mounting or wall display. Print Guidelines Orientation: Print flat on its back. Supports: None required (fully chamfered/beveled surfaces). Clearances: The waves and sails feature distinct gaps built directly into the geometry.